Anderic RR682M Replacement Remote Control Instruction Manual for Onkyo AV Receivers

1. Matulview

The Anderic RR682M is a replacement remote control designed for use with compatible Onkyo AV receivers. This remote offers pre-programmed functionality for immediate use with specified Onkyo models and can also be programmed to control various other devices, including cable boxes, satellite receivers, DVD players, and audio equipment.

It provides comprehensive control over your Onkyo receiver, including input selection and full menu navigation. Please note that this remote does not support switching between A/B speakers.

Figura 1: Quddiem view of the Anderic RR682M remote control, displaying all buttons and their labels.

2. Setup

2.1 Installazzjoni tal-batterija

Sib il-kompartiment tal-batterija fuq wara tal-kontroll remot.
Żerżaq l-għatu tal-batterija 'l isfel biex tiftaħha.
Daħħal żewġ (2) batteriji AA, waqt li tiżgura l-polarità korretta (+ u -) kif indikat ġewwa l-kompartiment.
Erġa’ poġġi l-għatu tal-batterija billi tiżżerżaq 'il fuq sakemm tikklikkja f'postu.

Lura view of the Anderic RR682M remote control showing the battery compartment

Figura 2: Lura view tal-kontroll remot, b'enfasi fuq il-kompartiment tal-batterija.

2.2 Initial Use with Onkyo Receivers

The Anderic RR682M remote control is pre-programmed for compatible Onkyo AV receiver models. For these models, no additional programming is required. Simply insert the batteries, and the remote is ready for use.

Ensure the remote is in the RIĊEVITUR mode before attempting to control your Onkyo receiver. This is typically indicated by a dedicated button or mode selection.
Point the remote directly at your Onkyo receiver and press the desired function buttons.

Compatible Onkyo Remote Models: RC-682M, RC-605S, RC-606S, RC-607M, RC-608M, RC-650M, RC-651M, RC-668M, RC-681M, RC-728M, RC-461M, RC-683M, RC-620M, RC-646S, RC-647M, RC-649M.

3. Istruzzjonijiet Operattivi

The RR682M remote provides full functionality for your Onkyo AV receiver. Below are common operations:

Power On/Off: Agħfas il- STANDBY/ON button to power the receiver on or off.
Għażla tal-Input: Uża l- SELEKTUR TAL-INPUT buttons (e.g., VCR/DVR, CBL/SAT, GAME/TV, TAPE/AMP, CD, DVD, AUX, MULTICH, TUNER, DOCK, TV, VCR, CABLE, SAT) to switch between different audio/video sources connected to your receiver.
Kontroll tal-Volum: Uża l- VOL+ u VOLUM - buttuni biex taġġusta l-volum ewlieni.
Siekta: Agħfas il- SILENZJU buttuna biex tiskoraġġixxi temporanjament l-awdjo. Agħfas mill-ġdid biex terġa' lura l-ħoss.
Navigazzjoni fil-menu: Use the directional arrow buttons (LUP, L isfel, Xellug, Lemin) u l- DĦUL button to navigate through your receiver's on-screen menus.
Ritorn/Ħruġ: Il- RITORN button typically exits a menu or goes back to the previous screen.
Mod ta 'Smigħ: Buttons like STEREO, DWAR allow selection of audio listening modes.
Kontrolli tal-daqq: Standard playback buttons (PLAY, PAUSE, STOP, FAST FORWARD, REWIND, SKIP) are available for compatible devices.

Nota Importanti: The Anderic RR682M remote control does not support switching between A/B speakers on your Onkyo receiver.

4. Multi-Device Programming

The RR682M is a 6-device universal remote. In addition to controlling your Onkyo receiver, it can be programmed to operate up to five other devices such as TVs, DVD players, VCRs, cable boxes, and satellite receivers. Refer to the included instruction booklet for detailed programming codes and steps for each device type.

4.1 Programming Steps (General)

Identify the device you wish to program (e.g., TV, DVD, CD, VCR, SAT).
Press and hold the corresponding device button on the remote (e.g., TV) until the indicator light illuminates.
Enter the 4-digit programming code for your device's brand from the provided code list.
If the code is accepted, the indicator light will turn off. Test the remote's functions with your device.
If the device does not respond, try the next code listed for your brand.

For a complete list of programming codes and advanced programming options, consult the physical instruction booklet that came with your remote.

5 Issolvi l-problemi

Problema	Soluzzjoni
Remote does not operate the Onkyo receiver.	Ensure fresh AA batteries are correctly installed. Verify the remote is in RIĊEVITUR mod. Point the remote directly at the receiver, ensuring no obstructions. Check if the receiver's remote sensor is clean and unobstructed.
Remote does not operate other devices after programming.	Ensure the correct device mode button (e.g., TV, DVD) is selected. Re-enter the programming code, trying alternative codes for your device brand. Confirm the device is powered on and its remote sensor is clear.
Some functions do not work on the Onkyo receiver.	Confirm the function is supported by the RR682M (e.g., A/B speaker switching is not supported). Ensure the receiver's firmware is up to date if applicable (consult your receiver's manual).

6. Speċifikazzjonijiet

Karatteristika	Dettall
Numru tal-Mudell	RR682M
Brand	Anderiku
Dimensjonijiet tal-Prodott	8 x 2 x 1 pulzieri
Piż tal-oġġett	3.2 uqija
Batteriji Meħtieġa	2 batteriji AA (mhux inklużi)
Kulur	Iswed
Apparati Max Appoġġjati	6 (1 pre-programmed for Onkyo, 5 programmable)
Karatteristika Speċjali	Disinn ergonomiku
Manifattur	Dan's Electronics Eċċ., Inc.

7. Garanzija u Appoġġ

For specific warranty information, please refer to the documentation included with your purchase or contact Anderic customer support directly. Anderic is a US-based company committed to providing high-quality replacement remote controls.

For further assistance, programming inquiries, or troubleshooting not covered in this manual, please visit the official Anderic websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.

Figure 3: Anderic company logo.

	Manwal tat-Tħaddim u Lista tal-Kodiċijiet tal-Kontroll mill-Bogħod Anderic RR682M Manwal komprensiv għat-tħaddim tal-kontroll remot Anderic RR682M. Jinkludi struzzjonijiet ta' setup għal riċevituri Onkyo u komponenti AV oħra, metodi ta' programmar dettaljati (dħul ta' kodiċi, tiftix ta' kodiċi), u lista estensiva ta' kodiċijiet ta' kontroll remot għal diversi tipi ta' apparati bħal DVD players, TVs, VCRs, u aktar.
	Manwal tal-Ipprogrammar tal-Kontroll mill-Bogħod Universali Anderic RRUR01 Dan il-manwal jipprovdi struzzjonijiet dettaljati għall-ipprogrammar u t-tħaddim tal-kontroll remot universali Anderic RRUR01. Ikopri d-dħul tal-kodiċi, it-tiftix awtomatiku, il-metodi ta' tiftix b'buttuna waħda, il-qfil tal-apparat, il-karatteristiċi ta' punch-through, il-funzjonijiet tat-tagħlim, l-aġġustamenti tad-dawl ta' wara, u jinkludi lista komprensiva ta' kodiċijiet għal diversi marki u tipi ta' apparati.
	Manwal tal-Kontroll mill-Bogħod Universali Anderic RRU401.3 Gwida komprensiva għall-ipprogrammar u l-użu tal-kontroll remot universali Anderic RRU401.3, inkluż input ta' kodiċi, tiftix awtomatiku, u karatteristiċi avvanzati bħal macros u punch-through.
	Manwal tal-Utent tal-Kontroll mill-Bogħod Universali RR1002 Manwal tal-utent għall-Kontroll mill-Bogħod Universali RR1002, li jipprovdi struzzjonijiet dwar l-ipprogrammar, l-input tal-kodiċi, l-użu tas-shortcut key, il-funzjoni tat-tagħlim, l-identifikazzjoni tal-kodiċi, ir-reset tal-fabbrika, l-issettjar tat-tajmer tal-irqad, u l-illokkjar tas-setup.
	Manwal tat-Tħaddim tal-Kontroll mill-Bogħod Universali Anderic RRU401.4 Gwida komprensiva dwar kif tħaddem il-kontroll remot universali Anderic RRU401.4, li tkopri l-ipprogrammar, il-funzjonijiet tat-tagħlim, is-setup tal-makro, u s-settings tal-apparat.
	Anderic RRH100/RRHC100 Universal Hospitality Remote Control Manual Comprehensive instruction manual for the Anderic RRH100 and RRHC100 universal hospitality remote controls, detailing setup, programming, and advanced features for TV and STB control.

Anderic RR682M