Tissot PRC 200 19mm Black Rubber Watch Band Strap Instruction Manual

1. Introduzzjoni

This manual provides essential information for the proper installation, use, and maintenance of your Tissot PRC 200 19mm Black Rubber Watch Band Strap. This original Tissot watchband is designed for Tissot Men's PRC200 quartz watches with the back-case reference number T055417A. Please read these instructions carefully to ensure optimal performance and longevity of your watch strap.

2. Prodott Aktarview

The Tissot PRC 200 rubber watch band is crafted for durability and comfort, featuring a secure buckle mechanism. It is specifically designed to integrate seamlessly with compatible Tissot watch cases.

Figura 2.1: Quddiem view of the Tissot PRC 200 19mm black rubber watch band. This image displays the two strap pieces, both featuring the Tissot logo embossed on the exterior surface. The strap has a smooth finish with a series of rectangular perforations on one side.

Figura 2.2: Lura view of the Tissot PRC 200 19mm black rubber watch band. This image highlights the textured inner surface of the strap, designed for comfort and grip. The stainless steel buckle, engraved with the Tissot logo, is also visible, along with the 'STAINLESS STEEL' and 'T055417A' markings on the buckle and strap respectively.

Figura 2.3: Close-up view of the Tissot PRC 200 19mm black rubber watch band, focusing on the stainless steel buckle. The buckle clearly displays the Tissot logo, indicating authenticity and quality craftsmanship. The strap's attachment points are also visible.

3. Kompatibilità

This watch band is specifically designed for Tissot Men's PRC200 quartz watches that have the back-case reference number T055417A. To ensure proper fit, verify your watch's back-case reference number before installation.

Figure 3.1: Guide to finding your watch's model number. This diagram shows a typical Tissot watch caseback with various engravings. The model number, such as 'T123456A', is typically found engraved on the back of the watch case. Locate this number to confirm compatibility with the strap.

4. Installazzjoni (Setup)

Installing your new Tissot watch band requires careful handling to avoid scratching your watch case or the new strap. It is recommended to use a spring bar tool for this procedure.

1. Preparazzjoni: Place your watch face down on a soft, clean cloth to protect it from scratches.
2. Neħħi ċ-Ċinga l-Qadima (jekk applikabbli): Use a spring bar tool to compress the spring bar at one end of the existing strap. Gently pull the strap away from the watch lug. Repeat for the other end and the second strap piece.
3. Insert New Spring Bars: If your new strap did not come with spring bars, carefully remove them from your old strap or use new ones of the correct size (19mm). Insert one end of a spring bar into the hole on one side of the new strap.
4. Attach First Side: Position one end of the spring bar into the lug hole on the watch case. Using the spring bar tool, compress the other end of the spring bar and guide it into the corresponding lug hole. Ensure both ends are securely seated.
5. Attach Second Side: Repeat the process for the other side of the strap and then for the second strap piece.
6. Ivverifika s-Sigurtà: Gently pull on both ends of the installed strap to ensure they are firmly attached to the watch case.

5. Użu (Operattiv)

Once installed, the Tissot rubber watch band is ready for use. The buckle mechanism allows for easy adjustment and secure fastening.

• Liebes l-Għassa: Poġġi l-arloġġ fuq il-polz tiegħek.
• L-aġġustament taċ-Ċinga: Thread the longer strap piece through the buckle. Select the appropriate hole for a comfortable and secure fit.
• Securing the Buckle: Fasten the buckle pin through the chosen hole. Ensure the excess strap is passed through the keeper loops to prevent it from flapping.

Avoid over-tightening the strap, as this can cause discomfort and restrict circulation. A properly fitted strap should allow a finger to comfortably slide underneath.

6. Manutenzjoni

Proper care will extend the life and appearance of your rubber watch band.

• Tindif: Clean the rubber strap regularly with mild soap and water. Use a soft cloth or brush to gently scrub away dirt and debris. Rinse thoroughly with clean water.
• Tnixxif: Allow the strap to air dry completely before wearing. Avoid direct sunlight or excessive heat, which can degrade the rubber material.
• Evita kimiċi: Do not expose the strap to harsh chemicals, solvents, or strong detergents, as these can damage the rubber.
• Ħażna: Meta ma tkunx qed tuża l-arloġġ, aħżenh f'post frisk u niexef 'il bogħod mix-xemx diretta.

7 Issolvi l-problemi

If you encounter any issues with your watch band, consider the following:

• Strap feels loose after installation: Ensure the spring bars are fully seated in the watch lugs. Gently pull on the strap to confirm it is secure.
• Diffikultà fl-installazzjoni: Verify that you are using the correct 19mm spring bars. If you are having trouble, consider seeking assistance from a professional watchmaker.
• Irritazzjoni tal-ġilda: Ensure the strap is clean and dry. If irritation persists, consult a medical professional.

8. Speċifikazzjonijiet

9. Informazzjoni dwar Garanzija

This Tissot watch band is an original product. For specific warranty details regarding manufacturing defects, please refer to the warranty documentation provided with your original Tissot watch or contact Tissot customer service directly. General wear and tear, improper installation, or damage due to misuse are typically not covered under warranty.

10. Appoġġ għall-Klijent

For further assistance, questions, or to purchase additional accessories, please visit the official Tissot website or contact their authorized customer service department. You can also refer to the Tissot store on Amazon for product information and support.

Tissot Official Websit: www.tissotwatches.com

Tissot Store on Amazon: Visit the Tissot Store