CREWORKS 858D Rework Station Instruction Manual

1. Informazzjoni dwar is-Sigurtà

Jekk jogħġbok aqra bir-reqqa t-twissijiet u l-istruzzjonijiet kollha dwar is-sigurtà qabel ma tuża dan il-prodott. Jekk ma ssegwix it-twissijiet u l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, u/jew korriment serju.

• Always operate the rework station in a well-ventilated area to avoid inhaling fumes.
• Ilbes tagħmir protettiv personali xieraq, inklużi nuċċalijiet tas-sigurtà u ingwanti reżistenti għas-sħana.
• Żgura li l-provvista tal-enerġija taqbel mal-vol speċifikattage (110V).
• Do not touch the hot air gun nozzle or heated components directly. Allow them to cool before handling.
• Place the hot air gun securely in its stand when not in use. The auto-sleep function will reduce temperature.
• Żomm iż-żona tax-xogħol nadifa u ħielsa minn materjali li jaqbdu.
• Tħaddimx l-apparat jekk il-korda tad-dawl jew il-plagg ikun bil-ħsara.
• Żomm fejn ma jintlaħaqx mit-tfal.

2. Prodott Aktarview

The CREWORKS 858D Rework Station is a versatile tool designed for electronics repair, soldering, and desoldering tasks. It features a hot air gun with precise temperature and airflow control, making it suitable for various applications including SMD component removal, heat shrinking, and plastic welding.

This image shows the main unit of the CREWORKS 858D Rework Station, featuring the control panel with LED display, temperature and air adjustment knobs, and power switch. The hot air gun is connected, and three interchangeable nozzles are displayed above the unit.

This diagram highlights the key components of the rework station: the heat gun, temperature adjusting buttons, hot air adjusting knob, and the On/Off power switch.

Komponenti Inklużi:

• 1 x Hot Air Gun
• 3 x Nozzles (5mm, 8mm, 10mm)
• 1 x Handle Stand
• 1 x Hot Air Solder Station (Main Unit)

3. Setup

1. Spakkjar: Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Iċċekkja għal kwalunkwe ħsara waqt it-trasport.
2. Pjazzament: Place the rework station on a stable, heat-resistant, and non-flammable surface. Ensure adequate ventilation around the unit.
3. Qabbad il-Pistola tal-Arja Sħuna: Connect the hot air gun cable securely to the designated port on the main unit.
4. Attach Handle Stand: Secure the handle stand to the side of the main unit. This stand is crucial for safely resting the hot air gun when not in active use, activating its auto-sleep function.

   

   This image demonstrates the hot air gun securely placed in its side-mounted stand, which is essential for safety and activating the auto-sleep feature.

5. Agħżel iż-żennuna: Choose the appropriate nozzle size (5mm, 8mm, or 10mm) for your application and attach it firmly to the hot air gun.

   

   A hand is shown holding the hot air gun, illustrating how a nozzle is attached to its tip for various applications.

6. Konnessjoni tal-Enerġija: Ipplaggja l-korda tad-dawl fi żbokk ertjat ta’ 110V AC.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

1. Biex Tixgħel: Flip the "POWER" switch on the front panel to the "ON" position. The LED display will illuminate, showing the current temperature.
2. Biex Tifi: Flip the "POWER" switch to the "OFF" position. The unit will begin to cool down.

4.2 Aġġustament tat-Temperatura

The CREWORKS 858D Rework Station offers a precise temperature adjustment range from 212°F to 842°F (100°C to 450°C).

• Use the red ▲ (Fuq) u ▼ (Down) buttons on the control panel to increase or decrease the desired temperature.
• The LED display will show the set temperature. The unit will rapidly heat up to the set point.

This image shows a hand turning the air flow knob, which controls the intensity of the hot air output.

4.3 Adjusting Airflow

The airflow intensity can be adjusted to suit different applications.

• Rotate the "AIR" knob on the control panel to adjust the airflow intensity from 1 (low) to 8 (high).
• Higher settings provide stronger airflow, suitable for larger components or faster heat transfer.

4.4 Auto Sleep Function

The rework station is equipped with an auto-sleep function for safety and energy efficiency.

• When the hot air gun is placed back into its handle stand, the unit will automatically reduce the temperature and airflow to a standby mode.
• When the hot air gun is lifted from the stand, it will quickly return to the previously set temperature and airflow.

4.5 Pariri Ġenerali dwar l-Użu

• Always preheat the area around the component you are working on to prevent thermal shock.
• Maintain a safe distance between the nozzle and the component to avoid overheating or damaging the board.
• Use appropriate tweezers or tools to handle components once the solder has melted.

4.6 Vidjo Uffiċjali tal-Prodott

5. Manutenzjoni

• Tindif: Ensure the unit is powered off and cooled down before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Kura taż-żennuna: Regularly inspect nozzles for blockages or damage. Clean them as needed to ensure consistent airflow.
• Ħażna: Store the rework station in a dry, dust-free environment when not in use.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official CREWORKS websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.

Għal aktar riżorsi u informazzjoni dwar il-prodott, tista' żżur CREWORKS Store on Amazon.