Manwal tal-Utent tal-Interfaċċja tad-Data Axxess GM b'SWC (AX-GMCL2-SWC)

Introduzzjoni

The Axxess AX-GMCL2-SWC Data Interface is designed for aftermarket head unit installations in select GM vehicles from 2000 to 2013. This interface provides essential functionalities such as accessory power, retention of Retained Accessory Power (RAP), chimes, steering wheel audio controls, and the factory auxiliary input. It also ensures the retention of OnStar and original equipment (OE) Bluetooth capabilities. This unit is compatible with both non-amplified and analog/digital amplified vehicle models.

Kontenut tal-Pakkett

Axxess GM Data Interface (AX-GMCL2-SWC)
Vehicle-specific wiring harnesses
Manwal ta' struzzjonijiet (dan id-dokument)

Axxess AX-GMCL2-SWC Data Interface module and various wiring harnesses

Image: The Axxess AX-GMCL2-SWC data interface module (black box) and the accompanying wiring harnesses, including vehicle-specific connectors, RCA cables, and bare wire leads for various connections.

Setup u Installazzjoni

Installation of the AX-GMCL2-SWC requires careful attention to wiring connections. It is recommended that installation be performed by a qualified professional.

Kompatibilità

This interface is designed for specific GM vehicles manufactured between 2000 and 2013. Verify your vehicle's compatibility before proceeding with installation.

Konnessjonijiet tal-Wiring

Connect the provided wiring harnesses to your aftermarket head unit and the vehicle's factory wiring. Key connections include:

Qawwa Aċċessorju: Provides a 12-volt 10-amp accessory output.
NAV Outputs: Includes outputs for parking brake, reverse, mute, and speed sense signals, essential for navigation-equipped head units.
Kontroll tal-Istering Wheel (SWC): Connect the SWC wire(s) to your aftermarket radio's steering wheel control input. Refer to your radio's manual for specific wiring.
Konnessjonijiet Awdjo: Ensure proper connections for audio signals, including retention of balance and fade.
Chime Module: The interface integrates with the vehicle's chime system. Adjust chime volume using the potentiometer on the module if available.

Always consult the detailed wiring diagram provided with your specific product packaging for precise color-coded connections.

Konfigurazzjoni Inizjali

After all connections are made, follow the specific power-up and programming sequence outlined in the product's included quick-start guide to ensure proper communication between the interface and your aftermarket radio. This typically involves turning the ignition on and off in a specific pattern.

Istruzzjonijiet Operattivi

Once installed and configured, the AX-GMCL2-SWC enables the following retained features:

Kontrolli tal-istering: Operate volume, track/station, mode, and other functions directly from your vehicle's steering wheel buttons.
Retained Accessory Power (RAP): The radio will remain on for a short period after the ignition is turned off, until a door is opened, mimicking factory behavior.
Vehicle Chimes: All factory warning chimes (e.g., seatbelt, door ajar) will be reproduced through the aftermarket audio system.
OnStar and OE Bluetooth: If your vehicle is equipped, these features will continue to function through the interface.
Factory Auxiliary Input: The original auxiliary input, if present, will be retained and accessible through your new head unit.

Manutenzjoni

The AX-GMCL2-SWC is designed for long-term reliability and typically requires minimal maintenance. Consider the following:

Konnessjonijiet sikuri: Iċċekkja perjodikament li l-konnessjonijiet tal-wajers kollha jibqgħu sikuri u ħielsa mill-korrużjoni.
Aġġornamenti tal-Firmware: The module is Micro B USB updatable. Check the Axxess website for any available firmware updates that may improve performance or address compatibility issues. Use the official PC software for updates.
Fatturi Ambjentali: Ensure the module is installed in a dry, stable environment within the vehicle's dashboard, away from excessive heat or moisture.

Issolvi l-problemi

If you encounter issues with your AX-GMCL2-SWC, review il-passi komuni li ġejjin għas-soluzzjoni tal-problemi:

L-ebda Enerġija għar-Radju:
- Iċċekkja li l-konnessjonijiet kollha tal-enerġija u tal-art ikunu sikuri.
- Iċċekkja l-fjużijiet tal-vettura.
- Ensure the interface module is properly connected to the vehicle's data bus.
Il-Kontrolli tal-Istering Ma Jaħdmux:
- Confirm the SWC wire from the interface is correctly connected to the aftermarket radio's SWC input (e.g., 3.5mm jack or specific wire).
- Ensure the interface is programmed for your specific radio brand/model. If auto-detection fails, use the PC software for manual configuration.
- Some steering wheel buttons (e.g., "Source Down" or "OnStar" on older GM models) may not be remappable or supported by all aftermarket radios.
No Chimes or Incorrect Chime Volume:
- Verify the chime module connections.
- Adjust the potentiometer on the AX-GMCL2-SWC module to set the desired chime volume.
Dimmer Control Issues:
- Check the dimmer wire connection between the interface and the aftermarket radio.
- Ensure the aftermarket radio's dimmer settings are correctly configured.
Vehicle System Malfunctions (e.g., Speedometer erratic, vehicle not starting):
- Immediately disconnect the interface and revert to factory wiring if possible.
- These symptoms indicate a serious wiring error or module malfunction. Seek professional assistance.
Problemi tal-Aġġornament tal-Firmware:
- Ensure you are using the correct and latest PC software from Axxess.
- Use a reliable USB cable and ensure stable power to the module during updates.

If problems persist after following these steps, contact Axxess technical support for further assistance.

Speċifikazzjonijiet

Dimensjonijiet tal-Prodott	9.3 x 4.2 x 2.4 pulzieri
Piż tal-oġġett	12 uqija
Numru tal-Mudell	AX-GMCL2-SWC
ASIN	B01MG2F61T
Manifattur	Industriji Petra
L-Ewwel Data Disponibbli	21 ta’ Ottubru, 2016

Garanzija u Appoġġ

Informazzjoni dwar Garanzija

For detailed warranty information regarding the Axxess AX-GMCL2-SWC Data Interface, please refer to the documentation included with your purchase or visit the official Axxess website. Warranty terms and conditions are subject to change by the manufacturer.

Appoġġ Tekniku

If you require technical assistance or have questions not covered in this manual, please contact Axxess technical support directly. Contact information can typically be found on the manufacturer's official websit jew fl-ippakkjar tal-prodott.

	Axxess AX-CH013-SWC Chrysler Data Interface with SWC Installation and Configuration Guide Comprehensive installation and configuration guide for the Axxess AX-CH013-SWC Chrysler Data Interface with SWC, covering wiring, initialization, steering wheel control setup, and troubleshooting for 2004-up Chrysler, Dodge, Jeep, Mitsubishi, Ram, and Volkswagen vehicles.
	AXXESS AX-GMLAN29-SWC GM Vehicle Installation Instructions Install the AXXESS AX-GMLAN29-SWC interface in your 2006+ GM vehicle to retain steering wheel controls, factory audio features, backup camera, and more. This guide covers connections, programming, and adjustments for various amptipi ta 'lifier.
	Istruzzjonijiet għall-Installazzjoni tal-Interfaċċja tad-Data tal-GM AXXESS AX-GMLAN29-SWC għal Vetturi mill-2006 'il quddiem Comprehensive installation guide for the AXXESS AX-GMLAN29-SWC GM Data Interface. This manual provides detailed instructions for connecting the interface to retain factory features like steering wheel controls, backup cameras, RSE, and audio settings in 2006-up GM vehicles with non-amplified, analog, or digital ampsistemi lifikati.
	Istruzzjonijiet għall-Installazzjoni tal-Ħanżir tal-Kontroll tal-Istering Axxess AXSWCH-FD1 Istruzzjonijiet għall-installazzjoni tal-Axxess AXSWCH-FD1 Steering Wheel Control Harness, iddisinjat għal mudelli Ford magħżula mill-2013-2019. Din il-gwida tagħti dettalji dwar il-konnessjonijiet u l-karatteristiċi għaż-żamma tal-kontrolli tal-awdjo tal-istering u l-kameras tal-backup tal-fabbrika.
	Axxess AXTO-M12 AmpIstruzzjonijiet għall-Installazzjoni tal-Interface tal-Lifer għal Mitsubishi 2007-2013 Gwida għall-installazzjoni pass pass għall-Axxess AXTO-M12 ampInterfaċċja tal-Lifier, iddisinjata għal mudelli magħżula ta' Mitsubishi Lancer, Outlander Sport, u Outlander mill-2007-2013. Tinkludi dijagrammi tal-wajers, proċeduri ta' aġġustament, u informazzjoni dwar appoġġ tekniku.
	Istruzzjonijiet għall-Installazzjoni tal-AXXESS AXTC-BM1: Interfaċċja BMW/Mini SWC Istruzzjonijiet komprensivi għall-installazzjoni tal-Kontroll tal-Istering Wheel (SWC) u l-Interface tad-Data tal-AXXESS AXTC-BM1, kompatibbli ma' mudelli magħżula ta' BMW u Mini mill-2006-2012. Jinkludi karatteristiċi, applikazzjonijiet, konnessjonijiet, programmazzjoni, u s-soluzzjoni tal-problemi.

Axxess AX-GMCL2-SWC