Manwal ta' Istruzzjoni tal-Bozza LED TCP Dimmable 9W 4100K BR30

1. Prodott Aktarview

The TCP BR30 ENERGY STAR® qualified dimmable 9-watt LED bulb is designed to provide efficient and long-lasting illumination. This bulb generates light output comparable to many 65-watt halogen bulbs while consuming significantly less energy. It is engineered for environmental safety, containing no lead or mercury, which simplifies disposal.

This LED bulb boasts a very long operational life, rated to maintain at least 70% of its initial light output after 25,000 hours of use.

Image 1.1: The TCP BR30 LED Bulb, showcasing its standard BR30 shape and E26 screw base. The bulb is white with a frosted diffuser.

2. Informazzjoni Importanti dwar is-Sigurtà

Please read and understand all instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• TWISSIJA: To avoid electric shock, always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
• Do not "hot swap" this bulb. Always turn off the fixture before replacing an existing bulb.
• This bulb is not recommended for use in fully enclosed fixtures because heat buildup will shorten its operational life. Ensure adequate ventilation around the bulb.
• Adattat għal damp postijiet.
• Do not use with standard dimmers unless specifically rated for LED compatibility. Use only with dimmers designed for LED products to ensure proper performance and avoid damage.
• Tiżżarmax jew timmodifikax il-bozza. Ġewwa m'hemm l-ebda partijiet li jistgħu jiġu sservisjati mill-utent.
• Kun żgur li l-bozza tkun invitata sew fis-sokit.

3. Gwida għall-Installazzjoni

Follow these steps to properly install your TCP BR30 LED bulb:

1. Itfi l-Enerġija: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the circuit breaker or fuse box controlling the fixture.
2. Neħħi l-Bozza Qadima: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it has been recently in use.
3. Spezzjona l-Apparat: Check the fixture socket for any damage or debris. Ensure it is clean and dry.
4. Installa Bozza Ġdida: Gently screw the TCP BR30 LED bulb into the socket until it is finger-tight. Do not overtighten.
5. Irrestawra l-Enerġija: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch to test the new bulb.

4. Operazzjoni

This TCP BR30 LED bulb is designed for standard on/off operation and is fully dimmable. For optimal dimming performance, use with LED-compatible dimmers. Using non-LED compatible dimmers may result in flickering, reduced performance, or damage to the bulb.

The bulb provides a cool white light with a color temperature of 4100 Kelvin, suitable for various indoor applications.

5. Care and Disposal

Tindif: Kun żgur li l-provvista tal-enerġija tkun mitfija u li l-bozza tkun berred qabel ma tnaddafha. Imsaħ il-bozza b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif likwidi jew materjali li joborxu.

Rimi: This TCP LED bulb contains no lead or mercury, making it environmentally safer for disposal compared to traditional fluorescent bulbs. Please dispose of the bulb according to local regulations for electronic waste or general waste, as applicable in your region.

6. Issolvi l-problemi ta' Kwistjonijiet Komuni

7. Speċifikazzjonijiet Tekniċi

8. Garanzija u Appoġġ għall-Klijent

For information regarding product warranty, returns, or technical assistance, please contact TCP customer support directly. Refer to the product packaging or the official TCP webis-sit għad-dettalji ta' kuntatt u t-termini tal-garanzija l-aktar riċenti.

Manifattur: TCP

Websit: Visit the TCP Store on Amazon