Rosewill CULLINAN MX-Blue ATX Mid Tower Gaming PC Computer Case

1. Matulview

The Rosewill CULLINAN MX-Blue is an ATX Mid Tower gaming PC computer case designed for optimal airflow and component visibility. It features three sides of tempered glass, pre-installed blue LED fans, and extensive support for liquid cooling radiators. This manual provides detailed instructions for setting up, operating, and maintaining your computer case.

Figure 1: Rosewill CULLINAN MX-Blue ATX Mid Tower Gaming PC Computer Case.

2. Karatteristiċi

• Tempered Glass Design: Features 3 sides of sleek and sturdy tempered glass on the front and both sides to showcase hardware and internal components.
• Tkessiħ Ottimizzat: Excellent airflow from 4 pre-installed 120mm blue LED cooling fans (3 front, 1 rear). Supports up to 2 additional 140mm fans on top or 6 total 120mm case fans.
• Appoġġ għar-radjatur: Optional 360mm radiator liquid cooling support in the front and 280mm radiator clearance on top.
• PSU Shroud: Customizable and ventilated PSU shroud basement supports 3 x 80mm fans to promote heat dissipation.
• Spazju għall-Komponenti: Supports up to 170mm tall CPU cooler and up to 360mm long VGA card.
• Filtri tat-Trab: Includes top and bottom dust filters for easy maintenance.

Figure 2: Optimized cooling diagram illustrating airflow paths within the case.

3. Speċifikazzjonijiet

Figure 3: Case dimensions (Height: 482mm/19in, Width: 225mm/8.86in, Depth: 429mm/16.91in).

4. Setup

Follow these steps to set up your Rosewill CULLINAN MX-Blue PC case and install your components:

1. Ħoll u Spezzjona: Carefully remove the case from its packaging. Inspect for any damage during shipping.
2. Neħħi l-Panewijiet tal-Ġnub: Unscrew the large, thick screws on the tempered glass side panels and carefully remove them. Place them on a soft, flat surface to prevent scratches.
3. Remove Front Panel (for cleaning/access): The front tempered glass panel can be removed by pulling it firmly from the bottom edge. There is a small gap at the bottom to insert your fingers. This provides access to the front dust filter and pre-installed fans.

Figura 4: Quddiem u wara views of the case, showing panel access points.
4. Installa Motherboard: Install the necessary standoffs for your motherboard size (Micro ATX, ATX, Mini-ITX). Carefully place your motherboard into the case and secure it with screws.
5. Installa Drives tal-Ħażna:
   • Għal HDDs ta' 3.5": Utilize the pull-out trays located in the PSU shroud basement.
   • Għal SSDs ta' 2.5": Mount them in the dedicated slots on the back of the motherboard tray.
6. Installa l-Provvista tal-Enerġija (PSU): Install your power supply unit in the dedicated compartment at the bottom rear of the case. Ensure proper orientation for airflow.
7. Installa Karti ta' Espansjoni (GPU, eċċ.): Remove the necessary expansion slot covers and install your graphics card or other PCIe cards. Secure them with screws.
8. Ġestjoni tal-Kejbil: Uża l- ample space behind the motherboard tray and the various cutouts for efficient cable routing. This helps improve airflow and aesthetics.


Figura 5: Intern ta' wara view highlighting cable management options.

9. Qabbad Kejbils I/O ta' quddiem: Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power, Reset, LED) to their corresponding headers on your motherboard. Note: Ensure your motherboard has an on-board USB 3.0 socket.
10. Erġa' waħħal il-Panelli: Once all components are installed and cables are managed, carefully reattach the front and side tempered glass panels.

5. Joperaw

The Rosewill CULLINAN MX-Blue case provides convenient front I/O ports for easy access and control.

Figure 6: Top I/O panel with labeled ports and controls.

• Buttuna tal-Qawwa: Agħfas biex tixgħel jew titfi l-kompjuter tiegħek.
• Buttuna Irrisettja: Agħfas biex terġa' tibda l-kompjuter tiegħek.
• Portijiet USB 3.0 (x2): Għal trasferiment ta' dejta b'veloċità għolja ma' apparati kompatibbli.
• Portijiet USB 2.0 (x2): Għal apparati USB standard.
• HD Audio In/Out: Qabbad il-headphones u l-mikrofonu tiegħek.
• Kontroll tal-veloċità tal-fann: Use the fan speed switch (labeled L-S-H) to adjust the speed of the pre-installed fans. 'L' for Low, 'S' for Standard, 'H' for High. This also controls the fan LED lights.

6. Manutenzjoni

Manutenzjoni regolari tgħin biex tiżgura prestazzjoni ottimali u lonġevità tal-komponenti tal-PC tiegħek.

• Tindif tal-Filtru tat-Trab: The case is equipped with magnetic dust filters on the top and bottom, and a removable filter behind the front panel. Regularly remove and clean these filters to prevent dust buildup inside the case.
  • Top and Bottom Filters: Easily slide out for cleaning.
  • Filtru ta 'quddiem: Remove the front tempered glass panel (as described in Setup section 4.3) to access the magnetic front filter.
• Tindif tal-Ħġieġ ittemprat: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the tempered glass panels. Avoid harsh chemicals that may damage the surface.
• Tindif ta 'ġewwa: Periodically use compressed air to blow out dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.

7 Issolvi l-problemi

If you encounter issues with your Rosewill CULLINAN MX-Blue case, consider the following common troubleshooting steps:

• Fans Not Spinning / LEDs Off:
  • Check the fan speed control switch on the top I/O panel. Ensure it is not set to 'L' (Low) if you expect full speed or 'S' (Standard) if you expect LEDs to be on (some modes might turn off LEDs).
  • Verify that the pre-installed fans are correctly connected to the fan hub/controller inside the case, and that the fan hub is powered and connected to the motherboard.
• Il-Portijiet USB ta' Quddiem Ma Jaħdmux:
  • Ensure the USB 3.0 and USB 2.0 headers from the front panel are securely connected to the correct ports on your motherboard.
  • Check your motherboard's manual for the correct header locations and ensure your motherboard supports the necessary USB 3.0 socket.
• No Power / System Not Booting:
  • Verify that the power button cable from the front panel is correctly connected to the "Power SW" pins on your motherboard's front panel header.
  • Ensure your Power Supply Unit (PSU) is properly installed, connected to all components, and switched on.
  • Confirm all internal components (motherboard, CPU, GPU, RAM) are correctly seated and powered.

For more complex issues, consult your motherboard and component manuals, or contact Rosewill customer support.

8. Garanzija u Appoġġ

For detailed warranty information and technical support, please refer to the official Rosewill resources:

• Manwal Uffiċjali għall-Utent (PDF): For comprehensive instructions and diagrams, you can download the official PDF user manual hawn.
• Rosewill Support: Visit the official Rosewill website or their Amazon store for product support, FAQs, and contact information: Rosewill Store on Amazon.