Introduzzjoni
The SMALLRIG Universal Microphone Shock Mount 1859 is designed to isolate your shotgun microphone from vibrations and handling noise. Featuring a four-point suspension system, it ensures clean audio recording by minimizing unwanted mechanical sounds. This versatile accessory can be easily mounted on cameras via a cold shoe or on boompoles and universal handles using its 3/8"-16 threaded connection.
Immaġni: Quddiem view of the SMALLRIG Universal Microphone Shock Mount 1859, showcasing its robust design and cold shoe base.
Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:
- 1 x SMALLRIG Cold Shoe Adapter (ID: 1858)
- 1 x Microphone Shock Mount Adapter
- 4 x Rubber Support Bands (plus spares)
Image: Components included in the package: the shock mount, cold shoe adapter, and rubber bands.
Karatteristiċi
- Four-Point Suspension: Designed to effectively reduce handling noise and vibrations for clearer audio.
- Angolu aġġustabbli: Features a knob for easy 180° angle adjustment, allowing flexible microphone positioning.
- Għażliet multipli ta 'Immuntar: Includes an integrated cold shoe for camera mounting and a 3/8"-16 threaded hole for boompoles or universal handles.
- Kostruzzjoni Durabbli: Magħmul b'materjali ta 'kwalità għolja għal prestazzjoni fit-tul.
Kompatibilità
The shock mount is compatible with shotgun microphones and other microphones with a diameter between 0.59 - 1.57 inches (15 - 40mm). Specific compatible models include:
- Rode: NTG1, NTG2, NTG3, NTG4, NTG4+
- Sennheiser: MKE 600, MKH 416, ME 66 K6, MKH 8060, MKH8070, MKH 418
- Azden: SGM-1X
- Audio-Technica: AT897, AT835ST, BP4029, AT4073, BP4073
- Schoeps: CMIT 5U, SuperCMIT 2U
- Shure: VP82, VP89S
- Neumann: KMR-81i, KMR-81D, Sanken CS-1, CS-2, CS-3e
- Voice Technologies: VT500
Image: A visual representation of the shock mount's compatibility with various microphone brands and models.
Setup u Installazzjoni
1. It-twaħħil tal-Mikrofonu
- Gently insert your compatible microphone into the rubber support bands of the shock mount. Ensure the microphone is securely held by all four bands.
2. Mounting to a Camera (Cold Shoe)
- Locate the cold shoe adapter at the base of the shock mount.
- Slide the cold shoe adapter into the cold shoe mount on your camera or camera cage.
- Issikka l-knurled wheel on the cold shoe adapter to secure the shock mount firmly in place.
Image: The shock mount attached to a camera's cold shoe, with an inset showing the cold shoe and 3/8"-16 threaded hole.
3. Mounting to a Boompole or Handle (3/8"-16 Thread)
- Unscrew the cold shoe adapter from the base of the shock mount to reveal the 3/8"-16 threaded hole.
- Screw the shock mount onto a boompole, light stand, or universal handle that has a 3/8"-16 screw.
- Ensure the connection is tight and secure before use.
Image: The shock mount integrated into a camera rig, demonstrating its versatility with a cold shoe adapter and 25mm rod clamp.
Operazzjoni
L-aġġustament tal-Angolu
The SMALLRIG Microphone Shock Mount features an adjustable knob that allows for a 180° tilt. To adjust the angle:
- Loosen the adjustment knob located on the side of the shock mount.
- Tilt the microphone to your desired angle.
- Tighten the adjustment knob firmly to lock the angle in place.
Image: Diagram illustrating the 180-degree angle adjustment capability of the shock mount.
Manutenzjoni
To ensure the longevity and optimal performance of your SMALLRIG Microphone Shock Mount, follow these maintenance guidelines:
- Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa biex tneħħi t-trab u d-debris. Evita li tuża kimiċi ħarxa jew materjali li joborxu.
- Rubber Bands: Periodically inspect the rubber support bands for signs of wear, stretching, or cracking. Replace them if necessary using the provided spare bands to maintain effective shock absorption.
- Ħażna: Store the shock mount in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Issikkar: Regularly check all screws and connections to ensure they are securely tightened.
Issolvi l-problemi
If you encounter any issues with your SMALLRIG Microphone Shock Mount, please refer to the following common troubleshooting tips:
- Mikrofonu Mhux Sikur:
- Ensure the microphone diameter is within the compatible range (15-40mm).
- Check if the rubber bands are properly seated and not damaged. Replace if worn.
- Storbju/Vibrazzjoni Eċċessiva:
- Verify that the microphone is correctly positioned within the shock mount and not touching the frame.
- Inspect the rubber bands for any damage or loss of elasticity. Replace if needed.
- Ensure the shock mount is securely attached to your camera or mounting device.
- Angle Adjustment Loose:
- Tighten the adjustment knob firmly after setting the desired angle.
If the issue persists, please contact SMALLRIG customer support for further assistance.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 1859 |
| Dimensjonijiet (L x W x H) | 5.5 x 5 x 12.1 ċm (2.17 x 1.97 x 4.76 pulzieri) |
| Piż | 73 Gramma (0.16 libbra) |
| Materjal | (Not explicitly stated, but implied durable plastic/metal from description) |
| Kulur | Iswed |
| Microphone Diameter Compatibility | 15mm - 40mm (0.59 - 1.57 pulzieri) |
| Għażliet ta 'Immuntar | Cold Shoe, 3/8"-16 Thread |
| Aġġustament ta' l-Angolu | 180° |
| Komponenti Inklużi | Shock Mount, Cold Shoe Adapter, 4x Rubber Support Bands |
| UPC | 697207062322 |
Image: Detailed dimensions of the shock mount, showing 13mm and 45mm measurements.
Garanzija u Appoġġ
This SMALLRIG product comes with a Garanzija ta' 2 snin mill-manifattur. For warranty claims, technical support, or any inquiries regarding your product, please contact SMALLRIG customer service directly.
Manifattur: SMALLRIG
For more information and support, visit the official SMALLRIG webis-sit jew irreferi għad-dokumentazzjoni tax-xiri tiegħek.
