ECHOGEAR Universal Streaming Device Mount

1. Introduzzjoni

The ECHOGEAR Universal Streaming Device Mount is designed to securely attach media streaming devices and small AV accessories to the back of flat screen TVs, keeping them out of sight. This mount offers a universal design compatible with various devices and TV setups, supporting items up to 3 pounds.

Figure 1.1: The ECHOGEAR Universal Streaming Device Mount with a Roku device secured.

Figure 1.2: Illustration showing a media device visible in front of a TV (left) and hidden behind the TV using the mount (right).

2. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti fil-pakkett qabel tibda l-installazzjoni:

• Universal Streaming Device Mount Plate
• Hook and Loop Straps (2)
• Various Philips head screws (M4, M6, M8)
• Washers u Spacers
• Manwal ta' Istruzzjoni

Figure 2.1: Contents of the ECHOGEAR Universal Streaming Device Mount package.

3. Speċifikazzjonijiet

Figure 3.1: Mount dimensions and weight capacity.

4. Apparati Kompatibbli

The ECHOGEAR Universal Streaming Device Mount is designed to be compatible with a wide range of streaming media devices and small accessories, including but not limited to:

• Roku (Roku 2, Roku 3, Roku 4, Roku Express, Roku Express+, Roku Premiere, Roku Premiere+, Roku Ultra)
• Apple TV (1st, 2nd, 3rd, and 4th Generation, 4K models)
• Amazon Fire TV
• TiVo Mini
• kaxxa tal-braga
• Other small AV devices up to 3 lbs

Figura 4.1: Eżamples of compatible streaming devices.

5. Setup u Installazzjoni

The mount can be attached directly to the back of your TV using an existing VESA hole or integrated with an existing TV wall mount.

5.1. Passi ta 'installazzjoni

1. Attach Panel to TV or TV Mount: Select an appropriate VESA screw hole on the back of your television. Use the provided screws, washers, and spacers to securely attach the mount panel. Ensure the panel is stable. If attaching to an existing TV mount, the panel slides between the TV and the mount at one of the VESA points.
2. Attach Streaming Device to Panel: Place your streaming device onto the mount panel. Use the included hook and loop straps to firmly secure the device to the panel. Ensure the device is centered and the straps are tightened to prevent movement.

Figure 5.1: Basic installation steps.

Figure 5.2: Mount attachment options: to a TV wall mount (left) or directly to the TV (right).

5.2. Ġestjoni tal-Kejbil

Once the device is secured, route all necessary cables (power, HDMI, etc.) neatly. The open design of the mount allows for various cable routing options to maintain a clean appearance behind the TV.

Figure 5.3: The mount discreetly positioned behind a wall-mounted television.

6. Istruzzjonijiet Operattivi

The ECHOGEAR Universal Streaming Device Mount is a passive accessory. Once installed and your device is secured, no further operation is required from the mount itself. Ensure your streaming device is properly connected to your TV and power source as per its own manufacturer's instructions.

7. Manutenzjoni

To ensure continued secure performance of your ECHOGEAR mount:

• Kontrolli regolari: Periodically inspect the mount and the secured device to ensure all screws remain tight and the hook and loop straps are still firmly holding the device.
• Tindif: If necessary, gently wipe the mount with a dry, soft cloth to remove dust. Avoid using abrasive cleaners or solvents.
• Limitu tal-Piż: Do not exceed the maximum weight capacity of 3 lbs. Overloading can compromise the mount's integrity and lead to damage.

8 Issolvi l-problemi

8.1. Device Not Secure

• Ensure the hook and loop straps are threaded correctly and pulled tight around the device.
• Verify that the device's weight does not exceed the 3 lbs capacity.
• Check that the mount plate itself is securely fastened to the TV or TV mount.

8.2. Mount Does Not Fit TV VESA Hole

• The mount is designed to attach to a single VESA screw hole. Ensure you are using the correct screw size (M4, M6, or M8) and appropriate washers/spacers for your TV.
• If using with a wall-mounted TV, ensure the mount does not interfere with the existing wall mount's stability. If the TV appears skewed, consider adding washers of equivalent thickness to the other VESA mounting points to even out the spacing.

8.3. Cables Are Not Tidy

• Utilize cable ties or clips (not included) to bundle and route cables along the mount or behind the TV for a cleaner appearance.

9. Garanzija u Appoġġ

For specific warranty information regarding your ECHOGEAR Universal Streaming Device Mount, please refer to the warranty card included in your product packaging or visit the official ECHOGEAR websit.

ECHOGEAR provides US-based customer service available 7 days a week to assist with any questions or support needs. Contact information can typically be found on the product packaging or the ECHOGEAR official websit.