1. Informazzjoni dwar is-Sigurtà
Aqra u ifhem it-twissijiet u l-istruzzjonijiet kollha tas-sigurtà qabel ma tuża dan il-prodott. Jekk ma ssegwix it-twissijiet u l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, u/jew korriment serju.
- Dejjem ilbes protezzjoni xierqa għall-għajnejn meta taħdem bil-batteriji.
- Kun żgur li l-vettura tkun f'żona b'ventilazzjoni tajba.
- Keep the tester away from heat, sparks, open flames, and other ignition sources.
- Do not touch hot engine parts or moving components.
- Ensure the battery terminals are clean and free of corrosion for accurate readings.
- Do not immerse the tester in water or expose it to rain.
- This device is designed for 12V automotive batteries only. Do not use on other voltagsistemi e.
2. Prodott Aktarview
The Sealey BT105 is a compact digital device designed for accurately testing 12V automotive batteries, cranking systems, and alternator charging systems. It provides quick and reliable results without generating heat or sparks, minimizing the risk of misdiagnosis. The tester operates without an internal battery, drawing power from the battery being tested, and can test batteries with a residual charge as low as 8V. Results are displayed on an LCD screen and can be printed via PC software.
Figure 1: Sealey BT105 Digital Battery & Alternator Tester with attached cables.
Karatteristiċi ewlenin:
- Accurately tests 12V batteries, cranking, and alternator systems.
- No heat, no sparks, and no misdiagnosis.
- LCD screen for clear display of results.
- Operates without an internal battery, powered by the tested battery.
- Capable of testing batteries with a residual charge of just 8V.
- Includes PC software for printing test results.
3. Setup
The Sealey BT105 is ready for use directly out of its storage pouch. No assembly or internal battery charging is required as the unit is powered by the battery it is testing.
Connecting the Tester:
- Ensure the vehicle ignition is off and all accessories are turned off.
- Qabbad il- aħmar pożittiv (+) clamp to the positive (+) terminal of the 12V battery.
- Qabbad il- iswed negattiv (-) clamp to the negative (-) terminal of the 12V battery.
- The tester will power on automatically once connected correctly.
Figure 2: The BT105 tester with its red and black clamps ready for connection to a 12V battery.
4. Istruzzjonijiet Operattivi
The BT105 features a simple menu-driven interface. Use the arrow buttons to navigate and the ENTER button to select options. The EXIT button typically returns to the previous menu or cancels an operation.
Figure 3: Close-up of the BT105's LCD screen and control buttons (Up, Down, Left, Right, ENTER, EXIT).
Navigazzjoni tal-Menu Prinċipali:
Upon powering on, the tester will display the main menu. Options typically include:
- Test ta 'malajr: Performs a rapid assessment.
- Battery In Vehicle: For testing batteries installed in a vehicle.
- Battery Out Of Vehicle: For testing standalone batteries.
- Review Data: View previously saved test results.
- Ipprintja d-Data: Initiate printing of results via PC connection.
- Setup tas-Sistema: Configure language, time, and other settings.
Figure 4: The BT105 displaying its Main Menu with various testing and utility options.
Performing a Battery Test (In Vehicle):
- Mill-Main Menu, agħżel 'Battery In Vehicle' u agħfas ENTER.
- The tester will prompt you to input the battery rating (e.g., CCA, Ah). Refer to the battery label for this information. Use the arrow keys to adjust the value and ENTER to confirm.
- The tester will then perform the test and display results such as battery health percentage, volum ta' ħlastage, internal resistance, and a recommendation (e.g., 'Good', 'Charge', 'Replace').
Figure 5: The BT105 screen prompting the user to input the battery's Ah (Amp-hour) value.
Figura 6: Eżample of battery test results displayed on the BT105, showing 'Healthy', 'Charge', 'Internal Res', 'Rated', and a 'REPLACE' recommendation.
Performing Cranking and Charging Tests:
After selecting 'Battery In Vehicle', you will typically be presented with options for further tests:
- Test tal-Krankjar: Follow on-screen prompts to start the vehicle engine. The tester will measure the cranking voltage and time to assess the starter system's performance.
- Test tal-Iċċarġjar: Follow on-screen prompts to run the engine at specified RPMs. The tester will measure the alternator's output voltage and ripple to evaluate the charging system.
Figure 7: The BT105 displaying the 'Test In Vehicle' menu, offering options for Battery, Cranking, and Charging tests.
Printing Results:
The BT105 can connect to a PC to print test results. Install the provided PC software on your computer. Connect the tester to your PC using a USB cable (not always included, check packaging). Select 'Print Data' from the Main Menu on the tester and follow the software instructions on your PC.
Figure 8: The BT105 connected to a laptop, demonstrating the print function for test results.
Figure 9: A user reviewing a printed report generated by the Sealey BT105 tester.
5. Manutenzjoni
- Tindif: Wipe the tester's casing b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Ħażna: Store the tester in its original pouch in a dry, cool place, away from direct sunlight and extreme temperatures.
- Spezzjoni tal-Cable: Regularly inspect the cables and clampIċċekkja għal kwalunkwe sinjal ta’ ħsara, tfarrik, jew korrużjoni. Ibdel jekk meħtieġ.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-tester ma jixgħelx. | Poor connection to battery terminals; Battery voltage baxx wisq (taħt l-8V). | Tiżgura clamps are securely attached and terminals are clean. Charge battery if voltage huwa taħt il-8V. |
| Qari mhux preċiż. | Corroded battery terminals; Incorrect battery rating input. | Clean battery terminals. Verify the correct CCA or Ah value from the battery label. |
| Cannot print results. | PC software not installed; USB cable not connected; Driver issues. | Install the PC software. Ensure USB cable is securely connected to both tester and PC. Check PC device manager for driver issues. |
7. Speċifikazzjonijiet
- Mudell: BT105
- Ditta: Sealey
- Vol Operattivtage: 12V
- Vol Operattiv Minimutage: 8V
- Sors tal-Enerġija: Battery Powered (from tested battery)
- Dimensjonijiet tal-Prodott: 5 x 23 x 17 ċm
- Piż tal-oġġett: 440 g
- Konnettività: USB for PC software
8. Garanzija u Appoġġ
This Sealey BT105 Digital Battery & Alternator Tester is covered by a 1 Snin Garanzija. For specific terms and conditions, please refer to the documentation included with your product or visit the official Sealey websit.
Figure 10: Sealey 1 Year Guarantee.
For technical support, spare parts, or warranty claims, please contact your authorized Sealey dealer or visit the Sealey customer support portal.
Websit: www.sealey.co.uk
