HobbyWing Quicrun 1060 Brushed ESC Instruction Manual

1. Prodott Aktarview

The HobbyWing Quicrun 1060 Brushed Electronic Speed Controller (ESC) is engineered for 1/10 and 1/12 scale remote-controlled cars and trucks. This waterproof unit offers reliable performance and is designed for ease of use, featuring a Tamiya battery plug for broad compatibility. It supports various running modes and battery types, making it a versatile choice for brushed motor setups.

Figure 1: HobbyWing Quicrun 1060 Brushed ESC

2. X'hemm fil-Kaxxa

• Hobbywing speed control with Tamiya battery plug

3. Karatteristiċi ewlenin

• 60 Amp Power: Provides robust power delivery for brushed motors.
• Waterproof Electronics: Ensures reliable operation in various environmental conditions.
• Multiple Running Modes: Supports Forward/Reverse/Brake, Forward/Brake, and Forward/Reverse modes.
• LiPo Cutoff Capability: Compatible with LiPo batteries up to 3S, with built-in low voltage cutoff protection.
• Integrated Tamiya Battery Plug: Simplifies connection to common RC battery packs.

Figure 2: Tamiya Logo, indicating compatible battery plug type.

4. Setup u Installazzjoni

4.1 Konnessjonijiet tal-Wiring

1. Konnessjoni tal-Mutur: Connect the ESC's motor wires (blue and yellow) to your brushed motor. The order may affect motor rotation; reverse if necessary.
2. Konnessjoni tal-batterija: Plug your battery pack into the ESC's Tamiya connector. Ensure correct polarity.
3. Konnessjoni tar-riċevitur: Plug the ESC's signal cable (usually black, red, white/yellow) into the throttle channel (typically Channel 2) of your RC receiver.
4. Swiċċ tal-Enerġija: Mount the power switch in an accessible location on your vehicle.

4.2 Jumper Cap Settings

The Quicrun 1060 ESC uses jumper caps to configure various settings, including running mode, battery type, and BEC output voltage. Refer to the detailed chart in your physical user manual for specific configurations. Incorrect settings can damage the ESC or battery.

Key Jumper Settings:

• Mod ta 'Ġiri: Select between Forward/Reverse/Brake, Forward/Brake, or Forward/Reverse.
• Tip ta 'batterija: Choose between NiMH or LiPo to ensure proper low voltage cutoff.
• BEC Output Voltage: Aġġusta l-voltage supplied to your receiver and servos (e.g., 6.0V or 7.4V).

4.3 Kalibrazzjoni tat-throttle

To ensure proper operation, the ESC must be calibrated to your transmitter's throttle range. Follow these general steps:

1. Turn on your transmitter and ensure all throttle trims are at neutral.
2. Qabbad il-batterija mal-ESC.
3. Hold the throttle stick at full throttle (highest position) and turn on the ESC.
4. The motor will emit a series of beeps. Once you hear the first beep, move the throttle stick to full brake (lowest position).
5. After another series of beeps, move the throttle stick to the neutral position.
6. The ESC will emit a final series of beeps, indicating successful calibration.

5. Modi Operattivi

The Quicrun 1060 ESC offers three primary operating modes, configurable via jumper caps:

• Forward/Reverse/Brake Mode: Standard mode for general driving, allowing forward, reverse, and braking.
• Forward/Brake Mode: Ideal for racing, providing only forward movement and braking, with no reverse.
• Modalità 'l Quddiem/Lura: Suitable for rock crawling or specific applications where immediate reverse is needed without a brake delay.

Consult your user manual's jumper cap chart for detailed instructions on how to select each mode.

6. Manutenzjoni

• Tindif: Regularly clean the ESC to remove dirt, dust, and debris. Use a soft brush or compressed air.
• Spezzjoni: Periodically check all wires and connectors for signs of wear, damage, or loose connections.
• Ħażna: Aħżen l-ESC f'ambjent niexef u frisk 'il bogħod mix-xemx diretta u minn temperaturi estremi.

7 Issolvi l-problemi

• Ebda Qawwa: Check battery connection, power switch, and ensure the battery is charged.
• Il-Mutur Mhux Jirrispondi: Verify receiver connection, throttle calibration, and motor wiring.
• Operazzjoni Errata: Re-calibrate the throttle range. Check for interference or loose connections.
• Is-sħana żejda: Ensure proper ventilation around the ESC. Check motor load and gearing.

For more detailed troubleshooting, refer to the comprehensive troubleshooting guide in your user manual or contact HobbyWing support.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official HobbyWing websit. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.