Sealey SMS255 Double Sliding Compound Mitre Saw 250mm

1. Introduzzjoni u Prodott Fuqview

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your Sealey SMS255 Double Sliding Compound Mitre Saw 250mm. Please read this manual thoroughly before initial use and retain it for future reference.

The Sealey SMS255 is a powerful 1800W compound mitre saw designed for precise cutting of wood and other specified materials. It features double slides for enhanced control, a 60-tooth TCT blade, and integrated work piece supports. For improved accuracy, the unit is equipped with an LED work light and a laser guide.

Figura 1.1: Aktarview of the Sealey SMS255 Double Sliding Compound Mitre Saw.

This image displays the complete Sealey SMS255 Double Sliding Compound Mitre Saw from a front-left perspective, showcasing its main components including the motor housing, blade guard, cutting table, and sliding rails.

2. Informazzjoni dwar is-Sigurtà

Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury or damage to the tool.

• Aqra l-Manwal: Ifhem l-istruzzjonijiet u t-twissijiet kollha qabel l-operazzjoni.
• Tagħmir Protettiv Personali (PPE): Dejjem ilbes nuċċalijiet tas-sigurtà, protezzjoni għas-smigħ, u maskra tat-trab.
• Żona tax-Xogħol: Keep the work area clean, well-lit, and free from obstructions. Ensure adequate ventilation.
• Sigurtà Elettrika: Ensure the power supply matches the tool's requirements (230V). Do not operate in damp jew kundizzjonijiet imxarrba.
• Sigurtà tax-xafra: Ensure the blade is correctly installed and sharp. Never attempt to remove jammed material while the saw is running.
• Biċċa tax-Xogħol Sikura: Dejjem clamp the workpiece firmly before cutting to prevent movement.
• Żomm il-Kontroll: Keep hands clear of the blade path. Use both hands to operate the saw when possible.
• Skonnettja l-plagg meta ma tkunx qed tużah: Disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.

3. Komponenti u Assemblaġġ

The Sealey SMS255 comes with essential components for immediate use and convenience.

Komponenti Inklużi:

• Biċċa tax-xogħol Clamp
• Dust Extraction Bag
• Ġorru Manku
• 60-tooth TCT Blade (pre-installed)

Setup Inizjali:

1. Spakkjar: Carefully remove the saw and all components from the packaging. Inspect for any shipping damage.
2. Pożizzjonament: Place the saw on a stable, level workbench or stand. Ensure sufficient space for workpiece movement and safe operation.
3. Attach Workpiece Clamp: Sikura l-biċċa tax-xogħol clamp to the saw table as shown in Figure 3.1. This clamp is crucial for holding material securely during cuts.
4. Installa l-Borża tat-Trab: Connect the dust extraction bag to the dust port. For optimal dust collection, consider connecting to an external dust extraction system.
5. Konnessjoni tal-Enerġija: Connect the saw to a suitable 230V power outlet.

Figure 3.1: Workpiece clamp fl-użu.

This image shows a close-up of the workpiece clamp holding a piece of wood firmly against the saw's fence, demonstrating its function in securing material for accurate and safe cutting.

4. Istruzzjonijiet Operattivi

Segwi dawn il-passi għal tħaddim sikur u effettiv tas-serrieq tal-mitra tiegħek.

1. Preparazzjoni tal-Materjal: Ensure the workpiece is free of nails, screws, or other foreign objects that could damage the blade.
2. Adjusting Mitre Angle: Loosen the mitre lock handle and pivot the turntable to the desired angle. The saw features locking increments at 0°, 15°, 22.5°, 30°, and 45° Left & Right. Securely tighten the handle.
3. Aġġustament tal-Angolu tal-Bevel: For bevel cuts, adjust the saw head tilt to the desired angle (up to 45°). Lock the bevel adjustment securely.
4. Pożizzjonament tal-Biċċa tax-Xogħol: Place the workpiece firmly against the fence and secure it with the workpiece clamp. Ensure the cutting line aligns with the laser guide.
5. Activating Laser and LED: The integrated laser guide and LED work light can be activated to assist with precise alignment and illumination of the cutting area.
6. Nagħmlu Qatgħa:
   • Hold the saw handle firmly.
   • Press the trigger to start the motor and allow the blade to reach full speed.
   • Slowly lower the saw head through the workpiece, applying steady, even pressure.
   • For wider materials, utilize the double sliding feature by pulling the saw head forward, lowering the blade, and pushing it back through the material. The slides can be locked at different lengths for greater control.
   • Ladarba l-qtugħ ikun lest, itlaq il-grillu u ħalli x-xafra tieqaf kompletament qabel ma tgħolli r-ras tas-serrieq.

Figure 4.1: Saw in operation, cutting wood.

This image captures the Sealey SMS255 mitre saw in action, with the blade descending through a wooden workpiece, illustrating the cutting process.

5. Manutenzjoni

Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tas-serrieq tiegħek.

• Skonnettja l-Enerġija: Always unplug the saw before performing any maintenance or cleaning.
• Tindif: After each use, clean dust and debris from the saw, especially around the blade guard, motor vents, and sliding rails. Use a brush or compressed air.
• Estrazzjoni tat-Trab: Regularly empty the dust extraction bag. If using an external system, ensure its filters are clean and connections are secure.
• Spezzjoni tax-xafra: Periodically inspect the blade for sharpness, damage, or missing teeth. A dull blade can cause kickback and poor cut quality.
• Sostituzzjoni tax-xafra: When replacing the blade, ensure the new blade is compatible (250 x 3.2 x Ø30mm) and installed with the correct rotation direction. Model No. SMS255B multipurpose blade is available for mild steel, aluminium, and wood with nails.
• Lubrikazzjoni: Keep the sliding rails clean and lightly lubricated to ensure smooth operation.

Figure 5.1: Dust extraction port.

Din l-immaġni tipprovdi close-up view of the dust extraction port on the Sealey SMS255, highlighting the connection point for the dust bag or an external dust collection system.

6 Issolvi l-problemi

Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bis-serrieq tal-mitra tiegħek.

7. Speċifikazzjonijiet

Detailed technical specifications for the Sealey SMS255 Double Sliding Compound Mitre Saw.

8. Garanzija u Appoġġ

Your Sealey SMS255 Double Sliding Compound Mitre Saw is covered by a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact Sealey customer service or your authorized Sealey dealer. Ensure you have your model number (SMS255) and purchase details available when contacting support.

For more information, visit the official Sealey websit: www.sealey.co.uk