MTX TNP212D2-8GK

MTX Car Audio System Instruction Manual

Model: TNP212D2-8GK

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your MTX 12" 400 Watt RMS Dual Loaded 1200 Watt Car Subwoofer Enclosure Audio System with Sub Box, Mono Block & 8-Gauge Amplifier Complete Wiring Installation Kit. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Informazzjoni dwar is-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti jew ħsara lit-tagħmir:

3. X'hemm fil-Kaxxa

Ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

MTX Dual 12-inch Subwoofer Enclosure with Amplifier and Wiring Kit

Image: The complete MTX car audio system, including the dual 12-inch subwoofer enclosure, mono block amplifier, and the comprehensive 8-gauge wiring installation kit.

Soundstorm 8-Gauge Amplifier Installation Kit Components

Immaġni: Dettaljata view of the Soundstorm 8-gauge amplifier installation kit, showing various wires, terminals, and the fuse holder necessary for connecting the ampaktar ħaj.

4. Setup u Installazzjoni

Proper installation is crucial for optimal performance. Follow these general steps:

  1. Ippjanar: Determine the best location for the subwoofer enclosure and amplifier in your vehicle. Consider space, ventilation, and cable routing. The subwoofer enclosure dimensions are approximately 13.79"D x 29.63"W x 13.79"H.
  2. Wajer tal-Enerġija: Connect the 8-gauge red power wire from the amplifier to the vehicle's battery (via the fuse holder). Ensure the fuse holder is installed close to the battery.
  3. Ground Wiring: Connect the 8-gauge black ground wire from the amplifier to a clean, unpainted metal surface on the vehicle's chassis.
  4. Tixgħel mill-bogħod: Connect the 18-gauge blue turn-on wire from the amplifier to the remote turn-on output of your car stereo.
  5. RCA Interconnect: Connect the RCA interconnect cable from your car stereo's pre-amp outputs għall- ampinputs RCA tal-lifier.
  6. Wiring tal-Ispeaker: Qabbad il-wajer tal-kelliem mill- amplifier's speaker outputs to the subwoofer enclosure's input terminals. Ensure correct polarity.
  7. Kontrolli Finali: Double-check all connections for security and proper insulation before reconnecting the vehicle's battery.
Subwoofer MTX u Amplifier with Dimensions

Image: An illustration showing the dimensions of the MTX subwoofer enclosure and the mono block amplifier, aiding in planning the installation space within a vehicle.

MTX Subwoofer Enclosure Installed in Car Trunk

Image: The MTX dual 12-inch subwoofer enclosure neatly installed in the trunk of a car, demonstrating a typical setup.

MTX Amplifier Connection Terminals

Immaġni: Close-up view of the MTX amplifier's connection terminals, including power, ground, remote, and speaker outputs, essential for proper wiring.

5. Istruzzjonijiet Operattivi

Once installed, your MTX audio system is ready for use. Ensure your car stereo is properly configured to send audio signals to the ampaktar ħaj.

Quddiem view of MTX Dual 12-inch Subwoofer Enclosure

Immaġni: Il-faċċata view of the MTX dual 12-inch subwoofer enclosure, showcasing the two subwoofers and the "Terminator" branding.

MTX Remote Bass Control Knob

Image: The MTX remote bass control knob, allowing for convenient adjustment of subwoofer output from the vehicle's cabin.

6. Manutenzjoni

To ensure the longevity and optimal performance of your MTX audio system, follow these simple maintenance guidelines:

7 Issolvi l-problemi

If you encounter issues with your MTX audio system, refer to the following common problems and solutions:

ProblemaKawża PossibbliSoluzzjoni
L-ebda ħoss mis-Subwoofer
  • Power wire disconnected or fuse blown.
  • Wajer tal-art maħlul.
  • Remote turn-on wire not connected.
  • RCA cables loose or faulty.
  • Speaker wires disconnected or incorrect polarity.
  • Check power connection and replace fuse if necessary.
  • Ensure ground wire is securely connected to a clean metal surface.
  • Verify remote turn-on wire is connected to car stereo's remote output.
  • Check RCA connections and try new cables if suspected faulty.
  • Re-check speaker wire connections and polarity.
Ħoss Mgħawġ
  • AmpIl-qligħ tal-lifier huwa ssettjat għoli wisq.
  • Input signal from stereo is distorted.
  • Speaker wires shorted.
  • Naqqas ampgwadann lifier.
  • Check car stereo's output for distortion.
  • Inspect speaker wires for damage or shorts.
AmpTisħin żejjed tal-lifer
  • Ventilazzjoni insuffiċjenti.
  • Improper impedance load.
  • Tiżgura amplifier has adequate airflow.
  • Verify subwoofer impedance matches amplifier's recommended load (4 Ohm).

8. Speċifikazzjonijiet

KaratteristikaDettall
Isem tal-MudellTNP212D2
Tip ta' KelliemSubwoofer
Dijametru tas-Subwoofer12 Pulzieri (x2)
Impedenza4 Ohm
Qawwa tal-Ħruġ Massimu tal-Ispeaker1200 Watts
Product Dimensions (Enclosure)13.79"D x 29.63"W x 13.79"H
Teknoloġija tal-KonnettivitàRCA, Wired (Subwoofer), Bluetooth (if applicable)
Modalità tal-Ħruġ tal-AwdjoMono
Metodu ta' KontrollTouch (via remote bass control)
ManifatturMTX
Numru tal-Mudell tal-OġġettTNP212D2-8GK
UPC715442111862

9. Garanzija u Appoġġ

Your MTX audio system comes with a Garanzija Limitata. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official MTX websit.

For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact MTX customer service. Contact information can typically be found on the MTX webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.

Dokumenti Relatati - TNP212D2-8GK

Preview Serje Marittima MTX AmpSerje MA - Manwal tal-Utent u Speċifikazzjonijiet
Manwal komprensiv għall-utent u speċifikazzjonijiet tekniċi għas-Serje MTX Marine AmpLifiers, inklużi l-mudelli MA750.1, MA1500.1, MA2500.1, MA400.4, MA800.4, MA1400.5, u MA900.6. Ikopri l-installazzjoni, il-wajers, il-kontrolli, il-karatteristiċi, u l-garanzija.
Preview Mikasa TampManwal tal-Partijiet Spare tal-Ing Rammer MTX-60E
Manwal komprensiv tal-ispare parts għall-Mikasa TampRammer Mikasa MTX-60E, bid-dettalji tal-komponenti, in-numri tal-partijiet, u d-dijagrammi għall-manutenzjoni u t-tiswija. Tinkludi informazzjoni dwar diversi mudelli ta' rammer Mikasa bħal MTX-60, MTX-60F, MTX-70, MTX-80, u MTX-90.
Preview Attwaturi Termoelettriċi Lineari Żgħar Honeywell Home MT4/MT8 - Speċifikazzjoni tal-Prodott
Folja dettaljata tal-ispeċifikazzjoni tal-prodott għall-attwaturi termoelettriċi lineari żgħar tas-serje Honeywell Home MT4 u MT8, li tkopri l-applikazzjonijiet, il-karatteristiċi, id-dejta teknika, id-dimensjonijiet, u l-informazzjoni dwar l-ordnijiet.
Preview Manwal tas-Sid u Gwida għall-Installazzjoni tal-Enclosure tas-Subwoofer tal-Ford Mustang MTX Audio FMUST05BK12A-TN
Manwal komprensiv tas-sid u gwida għall-installazzjoni tal-kaxxa tas-subwoofer speċifika għall-vettura MTX Audio FMUST05BK12A-TN għall-Ford Mustang (2005-2013). Jinkludi karatteristiċi, speċifikazzjonijiet, passi ta' installazzjoni, kif issolvi l-problemi, u informazzjoni dwar il-garanzija.
Preview MTX Audio Thunder 251D u 311D Power Amplifier Manwal tas-Sid
Manwal komprensiv tas-sid għall-power MTX Audio Thunder 251D u 311D amplifiers. Tkopri l-installazzjoni, il-karatteristiċi, l-ispeċifikazzjonijiet tekniċi, l-aġġustament tal-qligħ, is-soluzzjoni tal-problemi, u informazzjoni dwar il-garanzija.
Preview Manwal tas-Sid tal-Enclosure tas-Subwoofer tal-MTX Audio JWTJ97C20A-TN/JWTJ97T20A-TN Jeep Wrangler TJ
Dan il-manwal tas-sid jipprovdi struzzjonijiet dwar l-installazzjoni, karatteristiċi, speċifikazzjonijiet, u informazzjoni dwar il-garanzija għall-MTX Audio JWTJ97C20A-TN u JWTJ97T20A-TN ampGħeluq tas-subwoofer modernizzat iddisinjat għall-Jeep Wrangler TJ (1997-2006).