1. Introduzzjoni
This manual provides instructions for the AT&T EL50003 Accessory Handset. This handset is designed to expand your existing AT&T cordless telephone system, offering additional convenience and functionality. It requires a compatible AT&T base unit to operate.
Compatible base units include models: EL52103, EL52203, EL52253, EL52303, EL52353, EL52403, and EL52503.
2. Kontenut tal-Pakkett
Kun żgur li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- AT&T EL50003 Accessory Handset
- Handset Battery
- Handset Charger with AC adapter
3. Setup Inizjali
3.1. Installazzjoni tal-batterija
- Sib l-għatu tal-kompartiment tal-batterija fuq wara tal-handset.
- Żerżaq l-għatu 'l isfel biex tneħħih.
- Connect the battery connector securely into the jack inside the compartment.
- Place the battery into the compartment with the label facing up.
- Żerżaq l-għatu tal-kompartiment tal-batterija lura f'postu sakemm tikklikkja.
3.2. Iċċarġja l-handset
Before initial use, charge the handset for at least 10 hours. A full charge ensures optimal battery performance.
- Plug the small end of the AC adapter into the power jack on the back of the handset charger.
- Plug the large end of the AC adapter into a standard electrical outlet.
- Place the handset face up in the charger cradle. The ĦLAS indicator light on the handset will illuminate, confirming it is charging.
Image: The AT&T EL50003 accessory handset resting in its charging cradle. The handset features a silver and white design with a digital display showing "CHARLIE JOHNSON 800-222-3111" and the time "10:08 PM". A red 'CHARGE' indicator light is visible at the top left of the handset. The keypad has large, easy-to-read buttons with yellow numbering and function icons.
3.3. Reġistrazzjoni tal-Handset
The accessory handset must be registered to your AT&T cordless telephone base unit before use. Refer to your base unit's user manual for specific registration instructions, as procedures may vary slightly between models. A common registration process involves:
- Place the accessory handset in the base unit's charger or directly on the base unit.
- Agħfas u żomm il- PAĠNA or LOKATUR TAL-IDEJN button on the base unit for approximately 4 seconds. The base unit will enter registration mode.
- On the accessory handset, press the # key. The handset will display "Registering..." or a similar message.
- Once registered, the handset will display "Handset X Registered" (where X is the handset number) and emit a confirmation tone. If registration fails, try again.
4. Kif Tħaddem il-Handset
4.1. Nagħmlu Sejħa
- Standard Call: Agħfas il- TELEFON / FLASH button (green phone icon) or Kelliem, imbagħad ċempel in-numru tat-telefon.
- Pre-dial: Ċempel in-numru tat-telefon l-ewwel, imbagħad agħfas il-buttuna TELEFON / FLASH button (green phone icon) or Kelliem.
4.2. Jirċievu Sejħa
Meta jdoqq it-telefon, agħfas il-buttuna TELEFON / FLASH button (green phone icon) or Kelliem biex iwieġeb is-sejħa.
4.3. Volum ta 'aġġustament
Waqt sejħa, agħfas VOLUM up or down buttons on the side of the handset to adjust the earpiece or speakerphone volume.
4.4. Speakerphone
Agħfas il- Kelliem buttuna biex tattiva jew tiddiżattiva l-funzjoni tal-ispikerphone waqt telefonata.
4.5. Issejjaħ mill-ġdid
Agħfas ĊANTA biex view the last numbers dialed. Press the TELEFON / FLASH button (green phone icon) to call the displayed number.
4.6. Mute
Waqt sejħa, agħfas MUTE to temporarily silence your microphone. Press MUTE għal darb'oħra biex jintefa'.
4.7. Intercom (INT)
If you have multiple registered handsets, press INT to initiate an intercom call to another handset.
4.8. Navigazzjoni fil-menu
Uża l- AGĦŻEL/MENU button and the navigation arrows (up/down on the volume rocker) to access and navigate through the handset's menu options for settings and features.
5. Manutenzjoni
5.1. Cleaning the Handset
Wipe the handset and charger with a soft, slightly damp cloth. Do not use cleaning sprays or harsh chemicals, as these can damage the finish or electronic components.
5.2. Kura tal-batterija
For optimal battery life, keep the handset in the charger when not in use. If the handset will not be used for an extended period, remove the battery to prevent leakage.
6 Issolvi l-problemi
| Problema | Soluzzjoni |
|---|---|
| L-handset ma jixgħelx jew m'għandux enerġija. | Ensure the battery is correctly installed and fully charged. Place the handset in the charger and check if the CHARGE indicator light illuminates. |
| Ma nistax nagħmel jew nirċievi telefonati. | Verify the handset is registered to the base unit. Check the base unit's connection to the telephone line and power. |
| Il-mowbajl juri "Mhux Reġistrat" jew messaġġ simili. | Follow the registration steps in Section 3.3. Ensure the base unit is in registration mode. |
| Kwalità awdjo fqira jew statiku. | Move closer to the base unit. Ensure there are no large metal objects or other electronic devices interfering with the signal. |
7. Speċifikazzjonijiet
- Ditta: AT&T
- Mudell: EL50003
- Apparati Kompatibbli: EL52103, EL52203, EL52253, EL52303, EL52353, EL52403, EL52503
- Piż tal-oġġett: 10.4 uqija
- Dimensjonijiet tal-pakkett: 7 x 4.4 x 2.7 pulzieri
- Kulur: Fidda, Abjad
- Materjal: Plastic with metallic finish
- Sors tal-Enerġija: Elettriku bil-fili (għall-ċarġer)
- Tip tat-Telefon: Corded (refers to the base unit connection, handset is cordless)
- Tip ta' Dialer: Tastiera Unika
- Tip ta' Sistema ta' Tweġiba: Digital (if supported by base unit)
- Operazzjoni Multiline: Operazzjoni b'Linja Singola
8. Garanzija u Appoġġ
For warranty information and technical support, please refer to the documentation included with your original AT&T cordless telephone system base unit or visit the official AT&T website for communication products. You can also contact AT&T customer service for assistance.
AT&T Official Websit: www.att.com
