Prodott Overview
The AT&T EL52345 is an expandable cordless phone system featuring three handsets, an integrated digital answering system, and Caller ID/Call Waiting functionality. Designed for home or small office use, this system provides clear, interference-free communication using DECT 6.0 technology. The digital answering system offers up to 22 minutes of recording time, ensuring you never miss an important message. Each handset includes a backlit LCD screen for easy viewing of Caller ID entries and menu navigation.

This image displays the complete AT&T EL52345 cordless phone system. It includes the main base unit with an integrated digital answering system, and three cordless handsets. Two of the handsets are shown in their individual charging cradles, while the third is docked in the main base unit. The handsets feature a backlit LCD screen, a full numeric keypad, and dedicated buttons for call functions, menu navigation, volume control, speakerphone, mute, and intercom. The main base unit has controls for the answering system, including message playback, skip, repeat, and volume adjustment, along with a message counter display.
Gwida ta' Setup
Follow these steps to set up your AT&T EL52345 cordless phone system:
- Installazzjoni tal-batterija: Open the battery compartment on each handset. Insert the supplied AAA batteries, ensuring correct polarity. Close the compartment cover.
- Charging Handsets: Place each handset in its respective charging cradle or the main base unit. The CHARGE indicator on the handset will illuminate. Allow at least 16 hours for the initial charge before first use.
- Qabbad l-Unità Bażi:
- Qabbad tarf wieħed tal-korda tal-linja tat-telefon mal-jack TEL LINE fuq wara tal-unità bażi.
- Qabbad it-tarf l-ieħor tal-korda tal-linja tat-telefon ma' jack tat-telefon tal-ħajt.
- Ipplaggja t-tarf il-kbir tal-adapter tal-enerġija f'sokit elettriku li mhux ikkontrollat minn swiċċ tal-ħajt.
- Plug the small end of the power adapter into the POWER jack on the back of the base unit.
- Reġistrazzjoni tal-Handset: Handsets are pre-registered to the base unit. If a handset displays "To register HS..." or similar, refer to the troubleshooting section for manual registration instructions.
- Issettja d-Data u l-Ħin: After the initial charge, the handset will prompt you to set the date and time. Follow the on-screen instructions using the MENU and SELECT buttons.
Istruzzjonijiet Operattivi
Jagħmel u Jirċievi Sejħiet
- Biex Tagħmel Sejħa: Agħfas TELEFON / FLASH or Kelliem, imbagħad ċempel in-numru.
- Biex Twieġeb Sejħa: Agħfas TELEFON / FLASH or Kelliem meta jdoqq it-telefon.
- Biex Intemm Sejħa: Agħfas MITFI/KANNELLA or place the handset in the charging cradle.
- Ċempil mill-ġdid: Agħfas ĊANTA biex iċċempel l-aħħar numru li ċempel.
Sistema ta' Tweġiba
The digital answering system records messages when you are away or unable to answer calls.
- Ixgħel/Itfi: Agħfas ANS ON/OFF fuq l-unità bażi.
- Daqq tal-Messaġġ: Agħfas PLAY/WAQQAF on the base unit to listen to new messages.
- Skip Message: Waqt id-daqq, agħfas SKIP (right arrow) to skip to the next message.
- Repeat Message: Waqt id-daqq, agħfas IRREpeti (left arrow) to repeat the current message. Press twice to go to the previous message.
- Ħassar il-Messaġġ: Waqt id-daqq, agħfas Ħassar fuq l-unità bażi.
- Aġġusta Volum: Użu VOL ▲ or VOL ▼ on the base unit to adjust playback volume.
ID ta' min iċempel
The Caller ID feature displays the caller's name and number (if available) on the handset screen.
- Review Reġistru tas-Sejħiet: Agħfas CID on the handset to scroll through the call log.
- Ċempilli lura: Filwaqt li viewing a Caller ID entry, press TELEFON / FLASH biex iċempel in-numru.
Manutenzjoni
- Tindif: Clean the phone and base unit with a soft, slightly damp drapp. Tużax sprejs tat-tindif jew kimiċi ħarxa.
- Kura tal-batterija: To ensure optimal battery life, fully charge the handsets for 16 hours before first use. If the phone will not be used for an extended period, remove the batteries.
- Post: Place the base unit in a central location away from other electronic devices (e.g., microwaves, Wi-Fi routers) to minimize interference.
Issolvi l-problemi
| Problema | Soluzzjoni |
|---|---|
| L-ebda ton tal-arloġġ. | Ensure the telephone line cord is securely plugged into the base unit and the wall jack. Check if the power adapter is properly connected to the base unit and a working electrical outlet. |
| Handset displays "To register HS..." | To manually register a handset: Place the handset in the base unit. Press and hold the LOKATUR TAL-IDEJN button on the base unit for about 4 seconds until the IN USE light flashes. The handset will display "Registering..." and then "Handset Registered" when successful. |
| Kwalità tal-ħoss fqira jew statiku. | Move the handset closer to the base unit. Ensure the base unit is not near other electronic devices that may cause interference. Check the telephone line cord for damage. |
| Handset battery does not hold a charge. | Ensure the handset is properly seated in the charging cradle. Clean the charging contacts on both the handset and cradle with a dry cloth. If the issue persists, the battery may need replacement. |
| Is-sistema tat-tweġib tat-telefonati mhux qed tirreġistra l-messaġġi. | Ensure the answering system is turned ON. Check if the memory is full; delete old messages if necessary. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | EL52345 |
| Tip tat-Telefon | Bla fili |
| Numru ta' Handsets | 3 (espandibbli) |
| Tip ta' Sistema ta' Tweġiba | Diġitali |
| Kapaċità ta 'Reġistrazzjoni | Sa 22 minuta |
| Caller ID / Call Waiting | Iva |
| Teknoloġija | DECT 6.0 |
| Batteriji Meħtieġa | 3 AAA batteries (per handset) |
| Kulur | Fidda, Abjad |
| Materjal | Plastik |
| Product Dimensions (Base Unit) | 11.1 x 6.9 x 5.5 pulzieri |
| Piż tal-oġġett | 1.3 liri |
| Apparati Kompatibbli | Netwerks PSTN |
Appoġġ u Garanzija
For further assistance, technical support, or warranty information regarding your AT&T EL52345 cordless phone system, please refer to the official AT&T product support channels. Typically, warranty details are provided with the product packaging or can be found on the manufacturer's official websit.
Note: No official product videos were provided in the source data for embedding in this manual.





