Volteck LED MR16 Lamp Manwal ta' Istruzzjoni għad-Dawl tal-Jum ta' 127V 6W

1. Introduzzjoni

This instruction manual provides important information for the safe and efficient use of your Volteck LED MR16 Lamp. Dan lamp is designed to provide bright, energy-efficient illumination with a daylight white color temperature. Please read this manual thoroughly before installation and operation.

Figure 1: Volteck LED MR16 Lamp, showing the multi-LED array and two-pin base.

2. Informazzjoni dwar is-Sigurtà

Skonnettja l-Enerġija: Always ensure the power supply to the fixture is turned off before installing, removing, or cleaning the lamp.
Proper Voltage: Dan lamp is designed for 127V electrical systems. Do not use with incompatible voltage.
Użu fuq ġewwa biss: This product is intended for indoor use in dry locations. Do not expose to moisture or outdoor elements.
Żarmax: Tippruvax tiftaħ jew timmodifika l-lamp. M'hemm l-ebda partijiet li jistgħu jintużaw mill-utent ġewwa.
Evita Espożizzjoni Diretta tal-Għajnejn: Do not stare directly into the operating lamp, as the bright light may cause discomfort.
Immaniġġja b'Kura: Avoid dropping or subjecting the lamp għal impatti qawwija.

3. Setup u Installazzjoni

Follow these steps to properly install your Volteck LED MR16 lamp:

Itfi l-Enerġija: Sib is-swiċċ tad-dawl jew is-circuit breaker li jikkontrolla l-apparat tad-dawl u itfi l-provvista tal-enerġija.
Neħħi l-L il-Qadimaamp (jekk applikabbli): Jekk tissostitwixxi l eżistentiamp, allow it to cool completely before carefully removing it from the fixture.
Daħħal L Ġdidamp: Allinja ż-żewġ pinnijiet tal-Volteck LED MR16 lamp with the corresponding holes in the fixture's socket. Gently push the lamp fis-sokit sakemm ikun imwaħħal sew. Tisforzahx.
Irrestawra l-Enerġija: Ladarba l-lamp is securely installed, turn the power supply back on at the switch or circuit breaker.
Test: Turn on the light switch to verify the lamp qed jaħdem sew.

4. Istruzzjonijiet Operattivi

Il-Volteck LED MR16 lamp operates like a standard light bulb. Simply use the wall switch or fixture control to turn the light on or off. The LED lamp will provide instant full brightness upon activation.

5. Manutenzjoni

Tindif: Ensure the power is off and the lamp is cool before cleaning. Wipe the lamp with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or harsh chemicals, as these may damage the lamp.
L-ebda Partijiet li jistgħu jservu mill-utent: Dan LED lamp does not contain any user-serviceable parts. Attempting to repair or modify the lamp will void any potential warranty and may pose a safety risk.

6 Issolvi l-problemi

If you encounter issues with your Volteck LED MR16 lamp, irreferi għall-passi komuni li ġejjin għas-soluzzjoni tal-problemi:

Lamp Ma jixgħelx:
- Ensure the power supply to the fixture is on.
- Iċċekkja li l-lamp is securely inserted into the fixture's socket.
- Verify that the fixture itself is working correctly (test with another known-good lamp if possible).
- Ikkonferma l-voltage of your electrical system matches the lampIr-rekwiżiti ta' (127V).
Lamp Teptip:
- Tiżgura l-lamp is fully seated in the socket.
- Check for loose wiring in the fixture or switch (consult a qualified electrician if unsure).
- Verify that the fixture is compatible with LED lamps. Some older dimmer switches may not be compatible with LED technology and can cause flickering.

If these steps do not resolve the issue, please contact Volteck customer support or consult a qualified electrician.

7. Speċifikazzjonijiet

Karatteristika	Dettall
Brand	Volteck
Numru tal-Mudell	46180
Tip Dawl	LED
Daqs tal-Forma tal-Bozza	MR16
Kulur Dawl	Dawl tal-jum abjad
Voltage	127 Volts
Wattage	6 Watts (LED source), 40 watts (equivalent)
Piż tal-oġġett	0.704 uqija
Dimensjonijiet (Pakkett)	3.9 x 3.43 x 1.93 pulzieri
Metodu ta' Kontroll	Remote (Note: This specification might refer to a broader product line capability or a specific remote-controlled fixture, as the bulb itself is typically controlled by a wall switch.)

8. Garanzija u Appoġġ

Specific warranty details for the Volteck LED MR16 Lamp are not provided within this document. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or visit the official Volteck websit.

For technical support or further assistance, please contact Volteck customer service through their official channels.

	Istruzzjonijiet ta' Installazzjoni għal Prodott Elettriku Gwida għall-installazzjoni pass pass għal prodott elettriku, inklużi twissijiet ta' sigurtà u speċifikazzjonijiet tal-prodott. Tkopri l-wajers, l-immuntar, u l-prekawzjonijiet ta' sigurtà elettrika.
	Gwida għall-Installazzjoni u s-Sigurtà tas-Sokit Elettriku Volteck Din il-gwida tipprovdi struzzjonijiet għall-installazzjoni ta' sokit elettriku Volteck, filwaqt li tenfasizza l-prekawzjonijiet ta' sigurtà u l-użu xieraq. Tinkludi twissijiet dwar perikli elettriċi u riskji ta' soffokazzjoni assoċjati mal-basktijiet tal-plastik.
	Gwida għall-Installazzjoni tal-Komponenti Elettriċi u Twissijiet ta' Sigurtà Istruzzjonijiet komprensivi għall-installazzjoni u twissijiet kritiċi dwar is-sigurtà għal komponent elettriku, inklużi l-ispeċifikazzjonijiet tal-prodott, id-dettalji taċ-ċertifikazzjoni, u l-linji gwida dwar l-użu. Il-kontenut huwa ppreżentat bl-Ingliż.
	Luminaire LED Volteck: Speċifikazzjonijiet, Installazzjoni, u Garanzija Speċifikazzjonijiet dettaljati, struzzjonijiet ta' installazzjoni pass pass, linji gwida għat-tindif, u informazzjoni dwar il-garanzija għal-luminarja LED Volteck minn Grupo Truper. Jinkludi dettalji tekniċi u prekawzjonijiet ta' sigurtà.
	Luminario LED Volteck: Especificaciones e Instructivo de Instalación Informazzjoni dettaljata dwar il-luminożju LED Volteck, inklużi speċifikazzjonijiet tekniċi, gwidi ta' installazzjoni, garanzija u linji ta' tindif. Prodott tal-Grupp Truper.
	Volteck Luminario LED: Especificaciones e Instructivo de Instalación Gwida dettaljata tal-ispeċifikazzjonijiet e installazzjoni għall-luminożju LED Volteck tal-Grupo Truper, inklużi data tekniċi, garanzija, tindif u diagrammi.

Volteck 46180