Utilitech Pro 24-inch 2-Speed High Velocity Fan User Manual

Informazzjoni Importanti dwar is-Sigurtà

Please read and understand all instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• Dejjem aqla’ l-fann mill-plakka tal-elettriku qabel ma tnaddaf, tagħmel manutenzjoni, jew iċċaqlaq.
• Tħaddem ebda fann b'korda jew plagg bil-ħsara. Armi l-fann jew erġa' lura f'faċilità ta' servizz awtorizzata għal eżami u/jew tiswija.
• Tgħaddix il-korda taħt it-tapit. Tgħattix il-korda b'twapet, runners, jew kisi simili. Irranġa l-korda 'l bogħod miż-żona tat-traffiku fejn ma titfixkilx fuqha.
• Daħħalx jew tħallix subgħajk jew oġġetti barranin jidħlu fi kwalunkwe fetħa tal-ventilazzjoni jew tal-egżost għax dan jista' jikkawża xokk elettriku jew nar, jew jagħmel ħsara lill-fann.
• Do not use outdoors or on wet surfaces. This fan is designed for indoor use only.
• Poġġi l-fann fuq wiċċ stabbli u ċatt biex tevita li jinqaleb.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod mill-fann waqt it-tħaddim.

Kontenut tal-Pakkett

Carefully unpack your fan and ensure all items are present and in good condition. If any items are missing or damaged, contact customer support.

• Utilitech Pro 24-inch High Velocity Fan Unit
• Sturdy Floor Stand with Wheels
• Ħardwer tal-Assemblaġġ (boltijiet, skorfini, woxers)
• Manwal għall-Utent (dan id-dokument)

Setup

Istruzzjonijiet ta' Armar

Follow these steps to assemble your Utilitech Pro High Velocity Fan:

1. Carefully remove all packaging materials from the fan unit and the stand components.
2. Attach the fan head to the U-shaped floor stand using the provided bolts, nuts, and washers. Ensure the fan head is securely fastened and can pivot smoothly within the stand.
3. Attach the wheels to the designated points on the base of the floor stand. These wheels allow for easy portability of the fan.
4. Ensure all connections are tight and secure before plugging in the fan.

An image of the fully assembled Utilitech Pro 24-inch 2-Speed High Velocity Fan, showcasing its black metal frame, large circular fan head with a protective grille, and a sturdy base with wheels for portability.

Istruzzjonijiet Operattivi

Kontrolli

The fan features a simple control knob located on the rear of the fan motor housing. This knob allows you to select between two speed settings.

Operazzjoni

1. Poġġi l-fann fuq wiċċ sod u livellat.
2. Ipplaggja l-korda tad-dawl fi żbokk elettriku standard ta '120V AC.
3. Turn the control knob on the back of the fan to select your desired speed setting: '1' for low speed or '2' for high speed.
4. To turn off the fan, turn the control knob to the 'OFF' position.
5. Adjust the angle of the fan head by tilting it up or down to direct airflow as needed.

Manutenzjoni

Tindif

Tindif regolari jgħin biex tinżamm il-prestazzjoni tal-fann u testendi l-ħajja tiegħu.

• Dejjem aqla l-fann qabel it-tindif.
• Uża artab, damp drapp biex timsaħ l-uċuħ ta’ barra tal-fann. Tużax prodotti tat-tindif jew solventi li joborxu.
• To clean the fan blades, carefully remove the front grille (refer to assembly instructions for reverse steps if necessary). Wipe the blades with a soft cloth. Ensure the blades are dry before reattaching the grille.
• Tgħaddix il-fann fl-ilma jew tħalli l-ilma jqattar fil-kaxxa tal-mutur.

Ħażna

When not in use, store the fan in a cool, dry place, away from direct sunlight and moisture. It is recommended to cover the fan to protect it from dust.

Issolvi l-problemi

If you experience issues with your fan, refer to the table below for common problems and solutions.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Utilitech websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.