Manwal tal-Utent tar-Reġistratur tad-Data tal-Avvenimenti u t-Temperatura Pendant Onset HOBO UA-003-64

1. Introduzzjoni

The Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger is designed for accurate measurement of environmental conditions. This device efficiently collects and stores instantaneous contact event and temperature data, making it suitable for various monitoring applications, including rainfall measurement when paired with a tipping-bucket rain gauge. This manual provides essential information for the proper setup, operation, and maintenance of your data logger.

2. Prodott Aktarview

The HOBO UA-003-64 is a compact, waterproof data logger capable of recording both contact events and temperature. It is typically used with an optical base station (such as the BASE-U-4) for data offload and configuration. The device is designed for deployment in various environments, including outdoor and condensing conditions.

Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger with Optical Base Station

An image showing the Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger, which is a small yellow rectangular device with a white cable connected to it. Next to it is the smaller black Optic Base Station BASE-U-4 with a USB cable.

3. Karatteristiċi

2-wire interface sensor for mechanical and electrical contact closure measurement.
Maximum measurement rate of 1 Hz (1 pulse per second).
Temperature measurement range: -20°C to 70°C.
User-replaceable coin cell lithium battery with a 1-year lifespan.
Waterproof housing suitable for outdoor or condensing environments, submersible up to 30 meters (100 feet).

4. Kontenut tal-Pakkett

The standard kit includes the following components:

UA-003-64 Pendant Event and Temperature Data Logger
Optic Base Station BASE-U-4
Free software download (available from the manufacturer's websit)

5. Setup

Installazzjoni tas-Softwer: Download and install the HOBOware software from the Onset website onto your computer. This software is required to configure the data logger and offload data.
Qabbad l-Istazzjon Bażi: Connect the Optic Base Station BASE-U-4 to your computer's USB port.
Connect Data Logger: Place the UA-003-64 data logger onto the optical base station. Ensure a secure connection for data transfer and configuration.
Configure Logger: Use the HOBOware software to configure the logging interval, start time, and other parameters for your specific application.
Skjerament: Deploy the data logger in the desired monitoring location. For accurate temperature measurements in direct sunlight, it is recommended to use a solar radiation shield (e.g., RS1 or M-RSA, sold separately).

6. Istruzzjonijiet Operattivi

Once configured and deployed, the UA-003-64 data logger will automatically begin recording data based on your settings. Event data is stored only when an event occurs, optimizing memory usage.

Ġbir tad-Dejta: The logger continuously monitors and records contact events and temperature at the specified intervals.
Data Offload: To retrieve data, connect the data logger to the optical base station and then to your computer. Use the HOBOware software to offload the recorded data.
Analiżi tad-Dejta: The HOBOware software allows you to view, plot, and analyze the collected data. Detailed event data is accessible for in-depth analysis.

7. Manutenzjoni

Sostituzzjoni tal-batterija: The data logger uses a user-replaceable coin cell lithium battery with an approximate 1-year lifespan. Refer to the full product manual for detailed instructions on safe battery replacement.
Tindif: Keep the data logger and optical base station clean. Wipe with a damp drapp kif meħtieġ. Evita li tuża kimiċi ħarxa jew materjali li joborxu.
Djar li ma jgħaddix ilma minnu: Ensure the waterproof housing is intact and free from cracks or damage before deployment in wet environments.

8 Issolvi l-problemi

Logger Not Responding: Ensure the battery is properly installed and has sufficient charge. Reconnect the logger to the optical base station and computer.
Kwistjonijiet ta' Trasferiment tad-Dejta: Verify that the HOBOware software is correctly installed and the optical base station is properly connected to the computer. Ensure the data logger is securely seated on the base station.
Qari tat-Temperatura Mhux Preċiż: If deployed in direct sunlight, ensure a solar radiation shield is used to prevent solar heating effects on temperature measurements.

9. Speċifikazzjonijiet

Speċifikazzjoni	Valur
Manifattur	Kompjuter tal-Bidu
Numru tal-Parti	UA-003-64-KIT
Piż tal-Prodott	50 g
Dimensjonijiet tal-Prodott (LxWxH)	7.1 x 2.3 x 3.3 ċm
Tip ta 'batterija	1 batterija tal-Lithium Metal (inkluża)
Stil	Moderna
Forma	Rettangolari
Sors tal-Enerġija	Li jaħdem bil-batterija
Karatteristiċi	Waterproof
ASIN	B01H2DX1D0
L-Ewwel Data Disponibbli	2018/09/04

10. Garanzija u Appoġġ

For detailed warranty information and technical support, please refer to the official Onset Computer Corporation webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta' garanzija.

	Manwal tal-Utent tar-Reġistratur tad-Data tat-Temperatura Pendant HOBO UA-001-xx Manwal komprensiv għall-utent għall-Onset HOBO Pendant Temperature Data Logger (mudelli UA-001-08 u UA-001-64), li jagħti dettalji dwar l-ispeċifikazzjonijiet, il-konnessjoni, is-setup, it-tħaddim, il-konfigurazzjoni tal-allarm, u s-sostituzzjoni tal-batterija.
	HOBO Pendant G Acceleration Data Logger - Manwal tal-Utent Gwida komprensiva għall-HOBO Pendant G Acceleration Data Logger, li tkopri l-karatteristiċi, l-ispeċifikazzjonijiet, it-tħaddim, il-konnessjoni, il-modi ta' logging, l-immuntar, il-protezzjoni, is-sostituzzjoni tal-batterija, u l-appoġġ tiegħu. Tinkludi dettalji dwar il-firxiet tal-kejl, l-eżattezza, l-intervalli ta' logging, il-klassifikazzjonijiet tat-temperatura, u informazzjoni dwar il-garanzija.
	Gwida għall-Utent ta' HOBOware - Softwer tar-Reġistrazzjoni tad-Data Onset Gwida komprensiva għall-utent għas-softwer HOBOware minn Onset, li tiddeskrivi fid-dettall kif tniedi, taqra, tipplotta, u tanalizza d-dejta minn data loggers HOBO u HOBOnodes mingħajr fili. Tkopri l-karatteristiċi, is-setup, l-għodod tal-analiżi tad-dejta, u l-ġestjoni tal-apparati HOBOware Pro u Lite għall-monitoraġġ ambjentali.
	Gwida għall-Bidu Mgħaġġel tal-Logger Sommerġibbli HOBO MX801 Gwida ta' bidu rapidu għall-HOBO MX801 Submersible Logger, li tiddettalja aktar minnview, konnessjoni tas-sensur, kalibrazzjoni, konfigurazzjoni, skjerament, tniżżil tad-dejta, u pproċessar.
	Manwal tal-Utent tar-Reġistratur tad-Data tat-Temp/RH HOBO MX1101 Manwal komprensiv għall-utent għall-HOBO MX1101 Temp/RH Data Logger, li jiddeskrivi l-karatteristiċi, l-ispeċifikazzjonijiet, is-setup, it-tħaddim, u s-soluzzjoni tal-problemi tiegħu. Tgħallem kif tikkonfigura, tuża, u taqra d-dejta minn dan il-logger abilitat għall-Bluetooth Smart għall-monitoraġġ ambjentali ta' ġewwa.
	Gwida għall-Bidu Mgħaġġel tal-Logger HOBO Pendant MX Temp (MX2201) u Temp/Light (MX2202) Gwida ta' bidu rapidu għad-data loggers Onset HOBO Pendant MX2201 u MX2202, li tkopri s-setup tal-app, il-konnessjoni tal-logger, l-iskjerament, u t-tneħħija tad-dejta.

Onset UA-003-64