Broadlink RM Mini3 Universal Remote Control Hub Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the setup, operation, and maintenance of your Broadlink RM Mini3 Universal Remote Control Hub. The RM Mini3 is designed to integrate and control various infrared (IR) appliances in your home, transforming them into smart devices accessible via your smartphone or voice assistants.

2. Informazzjoni dwar is-Sigurtà

Ensure the device is powered by a stable 5V power source.
Tesponix l-apparat għall-ilma jew temperaturi estremi.
Żomm l-apparat 'il bogħod mit-tfal.
Do not attempt to disassemble or repair the device yourself. Contact support if needed.
The device operates on a 2.4 GHz Wi-Fi network only. Ensure your router supports this frequency.

3. Kontenut tal-Pakkett

Broadlink RM Mini3 Universal Remote Control Hub
USB Power Cable (Note: Power adapter not included)
Manwal ta' Istruzzjoni

4. Prodott Aktarview

The Broadlink RM Mini3 is a compact, cylindrical device designed to blend seamlessly into your home environment. It features a single LED indicator and a reset button.

Broadlink RM Mini3 Universal Remote Control Hub

Figure 1: Broadlink RM Mini3 device with blue LED indicator.

Figure 2: Dimensions of the Broadlink RM Mini3 (64.5mm height, 55mm width).

Status tal-Indikatur LED:

Blue LED (Flashing Intermittently): AP Setup mode.
Blue LED (Flashing Quickly): Smart Setup mode.
LED abjad: IR signal learning or emitting.

5. Istruzzjonijiet ta' Setup

5.1 Konfigurazzjoni Inizjali tal-Apparat

Qawwa Mixgħul: Connect the RM Mini3 to a 5V USB power source using the provided cable. The LED indicator will light up.
Niżżel l-App: Download and install the free BroadLink IHC App from the App Store (iOS) or Google Play Store (Android).
Reset Device (if needed): If the LED is not flashing quickly (Smart Setup mode), press and hold the tiny pin-hole reset button with a slim needle for at least 6 seconds until the blue Wi-Fi LED flashes quickly.
Żid Apparat fl-App:
- Open the IHC App.
- Tap "+" (Add device) on the top right corner.
- Tap "Allow Only While In Use" to grant location permission.
- Select "Add a New Device".
- Choose "Universal Remote" from the device list.
- Select "RM mini 3".
- Tap "Next" and confirm your phone is connected to a 2.4 GHz Wi-Fi network.
- Tap "Done".
- Choose your home 2.4 GHz Wi-Fi network and input your password.
- Wait for the device to connect (up to 60 seconds). The LED will flash slowly, then turn off upon successful setup.
- Select the newly added device and choose a room for it, then name the device to complete the setup.

Figure 3: Visual guide for the 3-step setup process.

5.2 Gwida bil-Vidjo tas-Setup

Video 1: Detailed guide on setting up the Broadlink RM Mini3, including LED indications and app navigation.

6. Istruzzjonijiet Operattivi

6.1 Adding IR Appliances (TV, AC, etc.)

The RM Mini3 supports over 80,000 IR-controlled devices. Only IR (38KHz) remotes are supported; Bluetooth remotes are not compatible.

Enter Device Page: From the app's home screen, tap on your "Universal Remote" device.
Add Appliance: Tap "Add appliances" at the bottom.
Choose Category: Select the category of your appliance (e.g., TV, AC Remote Full Display).

Pair IR Device:

Choose the brand of your target device from the list (e.g., Sony TV, Gree Air Conditioner). If your brand is not listed, you can tap "Can't find my brand" and enter the model number.
The app will present multiple IR options. Test each option by pressing buttons on the virtual remote and observing if your appliance responds correctly.
If an option works, confirm all buttons function as expected.

If no pre-defined options work, proceed to

Dokumenti Relatati - RMmini3

	BroadLink Wi-Fi Smart Remote Hub b'Kejbil tas-Sensor - Manwal tal-Utent u Karatteristiċi Skopri l-BroadLink Wi-Fi Smart Remote Hub, apparat versatili għall-kontroll ta' apparati IR u RF. Il-karatteristiċi jinkludu kontroll tal-vuċi b'Alexa u Google Assistant, ġestjoni tal-app remota, sensing tat-temperatura/umdità, u skedar personalizzabbli għal esperjenza tad-dar aktar intelliġenti.
	BroadLink Mini-Hub GW4C: Manwal tal-Utent u Gwida għas-Setup Manwal uffiċjali għall-utent għall-BroadLink Mini-Hub GW4C. Din il-gwida tipprovdi struzzjonijiet pass pass għall-installazzjoni, is-setup tal-app, it-tqabbil ma' Alexa u Google Home, u l-karatteristiċi tal-kontroll tal-vuċi. Tgħallem kif ittejjeb l-esperjenza tad-dar intelliġenti tiegħek b'BroadLink.
	BroadLink RM mini 3 Universal Remote Setup and User Guide Comprehensive guide to setting up and using the BroadLink RM mini 3 universal remote. Learn about package contents, LED indicators, Wi-Fi setup, adding devices, and controlling your smart home appliances.
	Gwida għall-Bidu Mgħaġġel tal-BroadLink RM4 Pro Universal Remote Gwida ta' bidu rapidu għall-BroadLink RM4 Pro Universal Remote, li tiddeskrivi s-setup, it-tħejjija tal-app, iż-żieda tal-apparat, l-integrazzjonijiet ma' Google/Alexa/IFTTT, FAQs, u noti importanti.
	Gwida ta' Bidu Mgħaġġel ta' BroadLink: Setup u Konfigurazzjoni Gwida komprensiva għall-installazzjoni ta' apparati intelliġenti BroadLink, li tkopri l-installazzjoni tal-app, il-konnessjoni tal-apparat, l-ipprogrammar IR/RF, u l-integrazzjoni ma' Google Assistant u Amazon Alexa.
	Gwida għall-Konfigurazzjoni Rapida tar-Remote Universali BroadLink Gwida komprensiva biex tissettja l-BroadLink Universal Remote tiegħek. Tgħallem tikkonnettja mal-Wi-Fi, żid apparat IR u RF, u tintegra ma' assistenti tal-vuċi bħal Amazon Alexa u Google Assistant.