1. Introduzzjoni
This user manual provides comprehensive instructions for the safe and efficient operation of the Showtec Compact Par 7 Q4 7 x 3W RGBW LED Floor PAR Spot. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent damage to the unit or injury to personnel.
The Showtec Compact Par 7 Q4 is a compact RGBW PAR can designed for various lighting applications, offering versatile color mixing and robust performance.
2. Istruzzjonijiet tas-Sigurtà
Dejjem osserva l-prekawzjonijiet ta’ sigurtà li ġejjin biex tnaqqas ir-riskju ta’ xokk elettriku, nar, jew korriment:
- Tiżgura l-provvista tal-enerġija voltage jaqbel mal-voltage speċifikat fuq l-unità.
- Dejjem qabbad l-unità ma' sokit tal-elettriku ertjat.
- Tħaddimx l-unità jekk il-korda tal-enerġija tkun bil-ħsara.
- Skonnettja mill-provvista tal-enerġija qabel it-tindif jew il-manutenzjoni.
- Tesponix l-unità għax-xita jew l-umdità.
- Żomm ventilazzjoni adegwata madwar l-unità biex tevita li tissaħħan iżżejjed.
- Evita l-espożizzjoni diretta tal-għajnejn għas-sors tad-dawl.
- Din l-unità hija għall-użu fuq ġewwa biss.
3. Prodott Aktarview
The Showtec Compact Par 7 Q4 features seven 3W RGBW LEDs, providing a wide spectrum of colors. Its compact design makes it suitable for floor standing or truss mounting.
Figura 3.1: Quddiem view of the Showtec Compact Par 7 Q4 with red light output, showcasing its seven powerful RGBW LEDs.
Figure 3.2: The PAR spot emitting a bright white light, demonstrating its full spectrum capabilities.
Figure 3.3: The PAR spot displaying a vibrant blue light, highlighting its color mixing versatility.
Figura 3.4: Close-up view of the LED array when the unit is off, showing the individual lenses.
Figura 3.5: Wara view of the unit, showing the power input and DMX connections (XLR 3-pin).
Figura 3.6: Angolat view of the PAR spot, demonstrating the adjustable mounting bracket for floor or truss applications.
4. Setup
4.1 Disimballaġġ
Carefully unpack the unit and check for any damage during transit. Retain the packaging material for future transport or storage.
4.2 Immuntar
The Compact Par 7 Q4 can be used as a floor spot or mounted to a truss using the integrated bracket. Ensure the mounting surface or truss can support the weight of the fixture. Use appropriate clamps and safety cables when mounting overhead.
4.3 Konnessjoni tal-Enerġija
Connect the power cable to the unit's power input and then to a grounded electrical outlet. Verify that the local voltage jaqbel mar-rekwiżiti tal-unità (240 Volts).
4.4 Konnessjoni DMX (Mhux obbligatorja)
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If connecting multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.
5. Joperaw
5.1 Panel tal-Kontroll
The unit features a digital display and control buttons (Menu, Up, Down, Enter) on the rear for setting modes and DMX addresses.
5.2 Modi Operattivi
The Showtec Compact Par 7 Q4 typically offers several operating modes:
- Modalità DMX: Allows control via an external DMX controller. Set the DMX address using the control panel.
- Modalità Awtomatika: Pre-programmed light shows that run automatically.
- Modalità Attiva tal-Ħoss: The light reacts to sound via a built-in microphone.
- Modalità Kaptan/Skjav: Link multiple units where one acts as the master and others as slaves, synchronizing their operation.
- Modalità tal-Kulur Statiku: Select and display a single static color.
5.3 Ċart tal-Kanal DMX
Refer to the specific DMX channel chart in the full product manual for detailed information on controlling each function via DMX. Common channels include Dimmer, Red, Green, Blue, White, Strobe, and Program selection.
6. Manutenzjoni
6.1 Tindif
Regular cleaning of the lenses and housing is recommended to maintain optimal light output and extend the unit's lifespan. Use a soft, lint-free cloth and a mild glass cleaner. Do not use abrasive materials.
6.2 Sostituzzjoni tal-Fjus
If the unit does not power on, check the fuse located near the power input. Replace it with a fuse of the same type and rating only.
6.3 Ħażna
When not in use, store the unit in its original packaging or a suitable flight case in a dry, dust-free environment.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-unità ma tixgħelx | No power supply; Blown fuse; Damaged power cable | Check power connection; Replace fuse; Replace cable |
| Ebda kontroll DMX | Incorrect DMX address; Faulty DMX cable; DMX controller issue | Verify DMX address; Check/replace DMX cable; Test controller |
| Id-dwal jitteptep jew iġibu ruħhom b'mod irregolari | Poor DMX signal; Overheating; Internal fault | Check DMX connections; Ensure proper ventilation; Contact support |
| Il-kuluri mhumiex korretti | Incorrect DMX channel values; Internal calibration issue | Adjust DMX values; Perform factory reset if available; Contact support |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Showtec |
| Mudell | Q4 |
| Numru ta' Referenza | LIG0013729-000 |
| Sors tad-Dawl | 7 x 3W RGBW LEDs |
| Qawwa | 3 Watts (per LED) |
| Voltage | 240 Volts |
| Sors tal-Enerġija | Kejbil Elettriku |
| Dimensjonijiet (L x W x H) | 31.5 x 31 x 15.5 ċm |
| Piż | 2.73 Kilogrammi |
| ASIN | B01F04U758 |
9. Garanzija u Appoġġ
Information regarding specific warranty terms and conditions for the Showtec Compact Par 7 Q4 is not available in the provided product details. Please refer to the retailer or manufacturer's official websit għall-informazzjoni l-aktar aġġornata dwar il-garanzija.
For technical support, service, or spare parts inquiries, please contact your authorized Showtec dealer or the manufacturer directly. Always provide the model number (Q4) and reference number (LIG0013729-000) when seeking support.
