1. Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of the FEIG ID ISC.PR100 Proximity Reader. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
The FEIG ID ISC.PR100 is a high-performance proximity reader designed for various applications requiring reliable RFID tag detection. It operates at 13.56MHz and offers a significant reading range.
2. Informazzjoni dwar is-Sigurtà
Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-apparat:
- Ensure the power supply matches the device's specifications (12-24VDC).
- Tesponix l-apparat għal temperaturi estremi, umdità, jew dawl tax-xemx dirett.
- Evita li twaqqa’ jew tissuġġetta l-apparat għal impatti qawwija.
- Tippruvax tiftaħ jew issewwi l-apparat int stess. Irreferi għal kull manutenzjoni f'idejn persunal kwalifikat.
- Skonnettja l-enerġija qabel ma twettaq kwalunkwe installazzjoni jew manutenzjoni.
3. Prodott Aktarview
The FEIG ID ISC.PR100 Proximity Reader is a compact and robust device. Key features include:
- Frekwenza Operattiva: 13.56MHz
- Input Voltage: 12-24VDC
- Maximum Signal Range: 180mm
- Interface: RS-232 / RS-485
- Supported Transponders: ISO-tags 15639
- Flash Memory: 64 kByte
- Klassi ta' Protezzjoni: IP 30
Figure 3.1: FEIG ID ISC.PR100 Proximity Reader. This image shows the compact grey rectangular device with a visible connector port on one end, indicating its robust design for industrial applications.
4. Setup u Installazzjoni
Follow these steps for proper installation of your ISC.PR100 Proximity Reader:
- Immuntar: Securely mount the reader in the desired location using appropriate fasteners. Ensure adequate ventilation and avoid mounting near strong electromagnetic interference sources.
- Konnessjoni tal-Enerġija: Connect the 12-24VDC power supply to the designated power input terminals. Observe correct polarity.
- Konnessjoni tal-Interface tad-Data: Connect the reader to your host system using either the RS-232 or RS-485 interface, as required by your application. Refer to the device's pinout diagram for correct wiring.
- Tqegħid ta' l-antenna: Position the reader's antenna (if external) or the integrated antenna area to optimize read range and performance for your specific transponders.
- Qawwa Inizjali: Once all connections are secure, apply power to the device. The reader should perform a self-test and indicate readiness (e.g., via an LED indicator).
5. Istruzzjonijiet Operattivi
The ISC.PR100 operates by detecting ISO-tags 15639 transponders within its read range. Operation is typically controlled by a host system via the connected interface (RS-232/RS-485).
5.1 Operazzjoni Bażika
- Ensure the reader is powered on and connected to the host system.
- Place an ISO-tag 15639 transponder within the reader's effective range (up to 180mm).
- The reader will detect the transponder and transmit its data to the host system according to the configured communication protocol.
5.2 Protokoll ta' Komunikazzjoni
Detailed information regarding the communication protocol (commands, responses, data formats) for RS-232 and RS-485 interfaces can be found in the technical documentation provided by FEIG. It is essential to configure your host system to match the reader's communication settings (e.g., baud rate, parity, data bits, stop bits).
6. Manutenzjoni
The FEIG ID ISC.PR100 Proximity Reader is designed for low maintenance. However, regular care can extend its lifespan and ensure optimal performance.
- Tindif: Use a soft, dry cloth to clean the exterior of the device. Do not use abrasive cleaners, solvents, or excessive moisture.
- Spezzjoni: Periodically inspect cables and connectors for any signs of wear or damage. Ensure all connections are secure.
- Ambjent: Maintain the operating environment within the specified temperature and humidity ranges to prevent damage.
7 Issolvi l-problemi
If you encounter issues with your ISC.PR100, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Apparat mhux mixgħul. | L-ebda provvista tal-enerġija; volum mhux korretttage; kejbil difettuż. | Check power connections and supply voltage. Ensure cables are not damaged. |
| Cannot read transponders. | Transponder out of range; incorrect transponder type; interference; faulty reader. | Ensure transponder is within 180mm range. Verify it's an ISO-tag 15639. Check for strong electromagnetic fields nearby. |
| Communication errors with host system. | Incorrect interface settings (baud rate, etc.); faulty data cable; software issue. | Verify communication settings match between reader and host. Check data cable integrity. Consult host system software documentation. |
If the problem persists after attempting these solutions, please contact FEIG technical support.
8. Speċifikazzjonijiet
| Parametru | Valur |
|---|---|
| Mudell | ISC.PR100 |
| Vol Operattivtage | 12-24VDC |
| Konsum tal-Enerġija | 5VA Massimu |
| Frekwenza Operattiva | 13.56MHz |
| Maximum Signal Range | 180mm |
| Interface | RS-232 / RS-485 |
| Transponders appoġġjati | ISO-tags 15639 |
| Memorja Flash | 64 kByte |
| Klassi ta' Protezzjoni | IP 30 |
| ASIN | B01E803L08 |
| Manifattur | FEIG |
| Data L-Ewwel Disponibbli | 1 ta’ April, 2016 |
9. Garanzija u Appoġġ
For warranty information and technical support, please refer to the official FEIG website or contact your authorized distributor. Keep your purchase receipt as proof of purchase for warranty claims.
FEIG is committed to providing high-quality products and excellent customer service. Should you require assistance beyond the scope of this manual, do not hesitate to reach out to their support channels.
