1. Introduzzjoni
The Jura Professional Fine Foam Frother Add-On (Item Number 24251, Model 72168) is designed to enhance your Jura coffee machine by producing authentic, fine milk foam for a variety of specialty coffee beverages such as cappuccinos, lattes, and macchiatos. This accessory ensures a consistent and high-quality milk texture.
Stampa 1.1: The Jura Professional Fine Foam Frother Add-On, fully assembled and ready for use. This image displays the main body of the frother with its control dial and the transparent milk spout.
2. Kompatibilità
This frother is compatible with specific Jura Capresso Impressa models. Please verify your machine's model number before installation.
2.1 Compatible Models:
- Jura Capresso Impressa C5
- Jura Capresso Impressa C9
- Jura Capresso Impressa E8 (models 15109/15097)
- Jura Capresso Impressa E9
- Jura Capresso Impressa F7
- Jura Capresso Impressa F8
- Jura Capresso Impressa F9
- Jura Capresso Impressa F50
- Jura Capresso Impressa J5
- Jura Capresso Impressa J6
- Jura Capresso Impressa S7
- Jura Capresso Impressa S8
- Jura Capresso Impressa S9 (non-One-Touch models)
- Jura ENA 3
- Jura ENA 4
- Jura ENA 5
2.2 Incompatible Models:
This frother is mhux kompatibbli with the following Jura models:
- J6 (15150)
- J9OT (13592)
- Z7 (13549)
- Z9 (13752)
- Z5 (13214)
- Z6 (13299, 15093/15182)
- GIGA W3 (15089)
- GIGA X7 (13624)
- Z8 (15192)
- X8 (15177)
- WE8 (15145)
- S8 (15212/15210)
- E8 (15270/15271)
- E6 (15070)
- D6 (15216/15215)
- GIGA 6 (15274)
- GIGA 5 (15066)
3. Kontenut tal-Pakkett
Malli tiftaħ il-pakkett, jekk jogħġbok kun żgur li l-komponenti kollha li ġejjin huma preżenti:
- Frothing Assembly (main unit)
- Milk Siphon Tube with Connector
- Spare Ventilator (air intake valve)
- 30g bottle of Cappuccino Cleaner
Stampa 3.1: An sploda view showing the individual components of the Jura Professional Fine Foam Frother Add-On, including the main frothing unit, milk siphon tube, and detachable spout.
4. Setup u Installazzjoni
Follow these steps to correctly assemble and install your Jura Professional Fine Foam Frother Add-On:
- Attach the Frother: Securely connect the frothing assembly to the designated port on your compatible Jura coffee machine. Ensure it is firmly seated.
- Connect Milk Siphon Tube: Attach one end of the milk siphon tube to the connector on the frother.
- Insert into Milk Container: Place the other end of the milk siphon tube into a container of cold milk. Ensure the tube reaches the bottom of the container for optimal milk intake.
- Secure Milk Spout: Ensure the transparent milk spout is correctly screwed into the frother. It should hold the internal aluminum piece in place. Pushing it in without screwing can lead to milk spray.
Stampa 4.1: The Jura Professional Fine Foam Frother Add-On attached to a Jura coffee machine, actively dispensing frothed milk into a glass. This illustrates the frother in its operational state.
5. Istruzzjonijiet Operattivi
The frother features a control knob to adjust the milk output.
- Fine Foam (Cappuccino/Latte): To produce fine, frothy milk foam, turn the control knob fully to the left (approximately the 9 o'clock position). This setting is ideal for cappuccinos and lattes.
- Hot Milk: To dispense hot milk with minimal foam, turn the control knob towards the right (approximately the 3 o'clock position). This is suitable for hot chocolates or other milk-based beverages requiring less foam.
Experiment with the knob's position to achieve your desired milk texture and temperature. Always ensure your coffee machine is ready for milk preparation according to its own manual.
6. Manutenzjoni u Tindif
Regular cleaning is essential to maintain hygiene and ensure optimal performance of your frother.
- Tindif ta 'Kuljum: After each use, detach the frother from the machine. Disassemble the milk spout and siphon tube. Rinse all components thoroughly under warm running water.
- Tindif fil-Fond: Periodically, use the provided Jura Cappuccino Cleaner. Follow the instructions on the cleaner bottle for proper dilution and cleaning procedure. This helps remove stubborn milk residues.
- Aħsel bl-idejn biss: All components of the frother are designed for hand washing. Do not place them in a dishwasher, as this can damage the materials.
- Ventilator Maintenance: The small cap at the top (ventilator/air intake valve) is crucial for foam production. Ensure it is clean and free from blockages. A spare ventilator is included for replacement if needed.
- Assemblaġġ mill-ġdid: Ensure all parts are completely dry before reassembling. Pay attention to correctly screwing the milk spout to secure the internal aluminum piece.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No foam or poor foam quality |
|
|
| Milk sprays or leaks |
|
|
| Frother detaches during use |
|
|
8. Speċifikazzjonijiet
- Ditta: Ġura
- Numru tal-Mudell: 24251 (Numru tal-Mudell tal-Oġġett: 72168)
- Karatteristika Speċjali: Frother tal-Ħalib
- Kulur: Stainless Steel (components)
- Materjal: Various (including plastic and stainless steel)
- Użi Rakkomandati: Cappuccino, Latte, Milk Foam
- Komponenti Inklużi: Frothing assembly, milk siphon tube, spare ventilator, Cappuccino Cleaner
- Istruzzjonijiet għall-Kura tal-Prodott: Aħsel bl-idejn biss
- Kapaċità: Designed for use with external milk containers
- Stil: Moderna
- Numru ta' Settings: 2 (Fine Foam, Hot Milk)
- Sors tal-Enerġija: Utilizes power from the connected coffee machine
- Piż tal-oġġett: Madwar 9.5 uqija
- Sena tal-Manifattura: 2018 (skont id-dejta tal-prodott)
- UPC: 794151411159
9. Garanzija u Appoġġ
For information regarding warranty coverage, technical support, or to purchase replacement parts, please contact Jura customer service directly or visit their official websit.
