Manwal tal-Istruzzjonijiet tal-Audibax Neo 130 Professional Speaker Stands

1. Introduzzjoni

Thank you for choosing the Audibax Neo 130 Professional Speaker Stands. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new speaker stands. Please read this manual thoroughly before use and retain it for future reference.

The Audibax Neo 130 speaker stands are designed to securely support speakers up to 30 kg (66.1 lbs), offering adjustable height from 120 cm to 180 cm. They feature a robust metal construction with a 35 mm tube diameter, compatible with most PA speakers.

2. Istruzzjonijiet tas-Sigurtà

To prevent injury or damage to your equipment, always observe the following safety precautions:

• Kapaċità massima tat-Tagħbija: Do not exceed the maximum load capacity of 30 kg (66.1 lbs) per stand. Overloading can cause instability and collapse.
• Wiċċ Stabbli: Always place the speaker stands on a flat, stable, and level surface. Uneven surfaces can lead to tipping.
• Leg Spread: Kun żgur li s-saqajn tat-tripod huma estiżi għalkollox u msakkra fil-pożizzjoni tagħhom għal stabbiltà massima.
• Aġġustament Għoli: When adjusting the height, ensure the safety pin is correctly inserted into the desired hole after setting the height. Always loosen the adjustment knob before lowering or raising the pole.
• Poġġiment ta' Kelliema: Center the speaker securely on the stand's pole. Ensure the speaker's mounting hole is compatible with the 35 mm pole diameter.
• Tfal u Pets: Keep children and pets away from the stands, especially during setup and adjustment.
• Spezzjoni: Before each use, inspect the stands for any signs of damage, wear, or loose components. Do not use damaged stands.
• Trasport: Use the provided carrying bag for safe transport to prevent damage to the stands and other equipment.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• 2 x Audibax Neo 130 Speaker Stands
• 1 x Nylon Carrying Bag

The image above displays the complete package contents: two Audibax Neo 130 speaker stands, folded for transport, alongside their dedicated black nylon carrying bag. The stands are black with visible adjustment mechanisms.

4. Istruzzjonijiet ta' Setup

Follow these steps to set up your Audibax Neo 130 speaker stands:

4.1 Unfolding the Stand

1. Remove the speaker stand from the carrying bag.
2. Poġġi l-istand fuq wiċċ ċatt u stabbli.
3. Gently spread the three legs outwards until they are fully extended and the central support mechanism is locked. Ensure all legs are evenly spread for maximum stability.

This image shows two Audibax Neo 130 speaker stands with their tripod legs fully extended and locked, ready for height adjustment and speaker placement. The stands are black and appear stable.

4.2 Aġġustament tal-Għoli

1. Locate the height adjustment knob and safety pin on the upper pole section.
2. Remove the safety pin by pulling its ring.
3. Loosen the adjustment knob by turning it counter-clockwise.
4. Carefully raise or lower the upper pole to the desired height (between 120 cm and 180 cm).
5. Once the desired height is reached, align the hole in the upper pole with one of the holes in the lower pole. Insert the safety pin through both holes to secure the height.
6. Tighten the adjustment knob firmly by turning it clockwise to further secure the pole and prevent slippage.

This close-up image highlights the black star-shaped adjustment knob and the silver safety pin with its ring, which are used to set and lock the height of the speaker stand's upper pole.

4.3 Armar tal-Ispeaker

1. Ensure the stand is stable and the height is securely locked with both the safety pin and adjustment knob.
2. Carefully lift your speaker and align its bottom mounting hole with the top of the stand's pole (35 mm diameter).
3. Lower the speaker onto the pole, ensuring it sits firmly and is centered.
4. Verify the speaker's stability before leaving it unattended.

5. Operating the Speaker Stands

Once set up, the Audibax Neo 130 speaker stands provide a stable platform for your speakers. Consider the following for optimal performance:

• Pożizzjonament: Place the stands in locations that optimize sound projection and minimize obstruction.
• Kontroll tal-Istabbiltà: Periodically check the stability of the stands and speakers, especially in high-traffic areas or after adjustments.
• Fatturi Ambjentali: Avoid placing stands in areas where they might be exposed to strong winds, vibrations, or excessive moisture, which could compromise stability.

6. Manutenzjoni

Proper maintenance ensures the longevity and safe operation of your speaker stands:

• Tindif: Wipe the stands with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
• Ħażna: When not in use, fold the stands and store them in the provided nylon carrying bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Spezzjoni: Regularly inspect all components, including the legs, poles, adjustment knobs, and safety pins, for any signs of wear, damage, or corrosion. Ensure all screws and bolts are tight.
• Lubrikazzjoni: If the height adjustment mechanism becomes stiff, a small amount of silicone-based lubricant can be applied to the inner pole, avoiding contact with the adjustment knob's friction surfaces.

This image shows the two Audibax Neo 130 speaker stands in their folded position, demonstrating their compact form factor for storage or transport within the included carrying bag.

7 Issolvi l-problemi

If you encounter issues with your speaker stands, refer to the following common problems and solutions:

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Audibax products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Audibax websit.

For technical support, spare parts, or service inquiries, please contact Audibax customer service through their official channels. Please have your model number (Neo 130) and part number (10051437) ready when contacting support.

The image displays the Audibax brand logo, featuring stylized black text with an orange graphic element resembling sound waves.