Introduzzjoni
The Power Acoustik EG1-10000D is a high-performance Class D monoblock amplifier designed for car audio systems. This manual provides essential information for the proper installation, operation, and maintenance of your amplifier to ensure optimal sound quality and product longevity. Please read all instructions carefully before attempting installation or operation.
Informazzjoni dwar is-Sigurtà
Twissijiet Importanti dwar is-Sigurtà:
- Dan il-prodott fih kimiċi magħrufa mill-Istat ta’ Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.
- Tiżgura l- amplifier receives the correct electrical supply current. Insufficient current (below 400-600 amps of 14V DC) can lead to overheating and potential failure. Proper wiring, batteries, connectors, and capacitors are crucial.
- The output circuit must maintain a minimum 1 Ohm load. Operating below this impedance can trigger the protection circuit.
- Continuously activating the protection circuit due to incorrect installation or impedance can cause excessive heat and shorten the product's lifespan.
- Dejjem skonnettja l-batterija tal-vettura qabel ma tagħmel xi xogħol elettriku.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- Power Acoustik EG1-10000D Monoblock Ampaktar ħaj
- Manwal tas-Sid
- Dash Mount Remote Bass Control Knob
- Ħardwer tal-Immuntar (viti, eċċ.)
Setup u Installazzjoni
Installazzjoni xierqa hija kruċjali għall-prestazzjoni u l-lonġevità tiegħek ampifikatur. Huwa rakkomandat li l-installazzjoni titwettaq minn professjonist kwalifikat.
Immuntar tal- Ampaktar ħaj
The EG1-10000D is designed for surface mounting. Choose a location that provides adequate ventilation and is protected from moisture and direct sunlight. Ensure the mounting surface is secure and can support the amplifier's weight.
- Agħżel post ta 'immuntar adattat.
- Uża l- amplifier as a template to mark the mounting screw holes.
- Drill toqob pilota jekk meħtieġ.
- Sikura l- amplifier using the provided mounting hardware.
Konnessjonijiet elettriċi
Il- amplifier requires a robust electrical system to deliver its rated power. Ensure your vehicle's electrical system can provide 400-600 amps of 14V DC current. This includes appropriate gauge wiring, high-capacity batteries, and quality connectors.
- Input ta' Enerġija: Connect the main power cable from the battery to the amplifier's +12V terminal. Use appropriate gauge wire for the current draw.
- Konnessjoni mal-art: Connect a short, heavy-gauge ground cable from the amplifier's GND terminal to a clean, unpainted metal surface on the vehicle chassis.
- Tixgħel mill-bogħod: Connect a remote turn-on wire from your head unit or other switched 12V source to the amplifier's REM terminal.
- Riżultat tal-Kelliem: Qabbad is-subwoofer(s) tiegħek mal- amplifier's speaker terminals. Ensure the total impedance of the connected subwoofers is no less than 1 Ohm for stable operation.
Buttuna tal-Kontroll tal-Bass mill-Bogħod
Connect the dash mount remote bass control knob to the designated port on the amplifier. This allows for convenient adjustment of bass levels from the driver's seat.
Linking Two Monoblocks
For increased power output, two EG1-10000D amplifiers can be linked together. Refer to the detailed wiring diagrams in the full owner's manual for specific instructions on linking two units for double power.
Istruzzjonijiet Operattivi
Ladarba jkun installat kif suppost, il- amplifier will power on with your head unit. Adjustments can be made using the controls on the amplifier and the remote bass knob.
- Gwadan Kontroll: Adjust the gain setting to match the output voltage of your head unit. Start low and gradually increase until desired volume is achieved without distortion.
- Filtru Low Pass (LPF): Il- amplifier features a variable 12dB low pass filter. Adjust this to control the upper frequency limit of the audio signal sent to your subwoofers.
- Filtru Subsoniku: Utilize the variable subsonic filter to remove extremely low frequencies that are inaudible and can cause damage to subwoofers.
- Spinta baxxa: A 12dB bass boost feature is included to enhance low octave harmonics. Use this sparingly to avoid distortion.
- Bidla fil-Fażi: An 180-degree phase shift control improves low octave dynamics and helps blend the subwoofer output with other speakers in the system.
- Pum tal-bass mill-bogħod: Use the dash mount remote bass control knob for real-time adjustment of the subwoofer output level.
Manutenzjoni
To ensure the longevity and optimal performance of your Power Acoustik EG1-10000D amplifer, segwi dawn il-linji gwida tal-manutenzjoni:
- Żomm il- ampIl-lavatur ikun nadif u ħieles mit-trab u l-fdalijiet. Uża drapp artab u niexef għat-tindif.
- Kun żgur li jkun hemm fluss ta' arja adegwat madwar amplifer biex jipprevjeni s-sħana żejda. Timblokkax il-fetħiet tal-ventilazzjoni.
- Regularly check all electrical connections for tightness and corrosion. Loose connections can lead to power loss and heat buildup.
- Evita li tesponi l- amplifier għal temperaturi estremi jew umdità.
Issolvi l-problemi
Jekk tesperjenza problemi ma tiegħek amplifer, irreferi għall-passi komuni li ġejjin għas-soluzzjoni tal-problemi:
- Ebda Qawwa: Check all power and ground connections. Verify the remote turn-on wire is receiving 12V. Check the inline fuse on the main power cable.
- Protection Light On: This indicates an issue with the installation or operation. Common causes include:
- Insufficient electrical supply current (check wiring, battery, and charging system).
- Speaker impedance below 1 Ohm (check subwoofer wiring and impedance).
- Ċirkwit qasir fil-wajers tal-ispiker.
- Overheating (ensure proper ventilation).
- Ebda Ħsejjes: Check RCA input connections from the head unit. Verify speaker connections. Ensure gain settings are not too low.
- Ħoss Mgħawġ: Reduce gain settings. Check for proper LPF and subsonic filter adjustments. Ensure speaker impedance is correct.
- Amplifier Gets Hot: Some heat is normal, but excessive heat indicates a problem. This is often due to insufficient electrical supply current or an impedance load below 1 Ohm. Ensure proper ventilation and correct wiring.
If problems persist after following these steps, contact Power Acoustik customer support or a qualified car audio technician.
Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | EG110000D |
| Brand | Power Acoustik |
| Qawwa tal-Ħruġ (RMS) | 5000 Watts @ 1 Ohm |
| Numru ta 'Kanali | 1 (Monoblokk) |
| Impedenza Stabbli Minima | 1 Ohm |
| Voltage | 14 Volt (Nominali) |
| Provvista Massima Voltage | 14 Volts |
| Boost Boost | 12dB |
| Fażi Shift | 180 Grad |
| Tip ta 'Immuntar | Immonta fil-wiċċ |
| Dimensjonijiet (L x W x H) | 24 x 11.25 x 4.25 pulzieri |
| Piż tal-oġġett | 1.05 liri |
| UPC | 709483052840 |
| Kulur | Abjad |
Informazzjoni dwar Garanzija
Specific warranty terms and conditions for the Power Acoustik EG1-10000D amplifier are provided by the manufacturer. Please refer to the warranty card included with your product or visit the official Power Acoustik website for detailed information regarding coverage, duration, and claims procedures.
Appoġġ għall-Klijent
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Power Acoustik EG1-10000D amplifier, please contact Power Acoustik customer support. Contact information can typically be found on the manufacturer's official websit jew fl-ippakkjar tal-prodott.
