Introduzzjoni
The Intermec PB51 is a rugged, 4-inch direct thermal mobile receipt printer designed for demanding field service, route accounting, and point-of-service applications. It offers fast, reliable printing performance to enhance productivity for mobile workers.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your PB51 printer.
Figura 1: Quddiem view of the Intermec PB51 mobile receipt printer. A receipt is partially ejected from the front slot, displaying "Transaction Receipt", "Transaction #: 4530902261009", "Customer #: 057-806-730", and "Date: 2/26/2009 Time: 12:08:43 PM". The printer features a dark gray casing with a blue button on the left side and the "Intermec PB51" logo on the top panel.
Setup
1. Spakkjar u Spezzjoni
- Oħroġ il-printer u l-aċċessorji kollha mill-imballaġġ bir-reqqa.
- Ivverifika li l-komponenti kollha elenkati fil-pakkett huma preżenti.
- Inspect the printer for any visible damage. If damage is found, contact your supplier immediately.
2. Installazzjoni u Iċċarġjar tal-batterija
- Kun żgur li l-istampatur huwa mitfi.
- Locate the battery compartment on the printer.
- Daħħal il-batterija, waqt li tiżgura allinjament xieraq mal-kuntatti.
- Agħlaq il-kompartiment tal-batterija sew.
- Connect the AC adapter to the printer and a power outlet. The battery indicator light will show charging status. Allow the battery to fully charge before first use.
3. Tagħbija ta' Karta Termali
- Iftaħ il-qoxra tal-kompartiment tal-karta.
- Insert the thermal paper roll with the print-side facing the print head.
- Pull a small amount of paper out past the print mechanism.
- Close the paper compartment cover firmly until it latches.
- The printer's paper sensors will detect the paper, minimizing lost transactions.
4. Connectivity Setup (Bluetooth / USB / Serial)
- Bluetooth: Turn on the printer and enable Bluetooth on your host device (e.g., smartphone, tablet, or computer). Fittex għal available devices and select the PB51. Pair using the default PIN (refer to the printer's display or documentation for the specific PIN).
- USB: Connect the printer to your host device using a standard USB cable. Install the necessary printer drivers on your host device if prompted.
- Serjali: Connect the printer to your host device using a serial cable. Configure the serial port settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
Istruzzjonijiet Operattivi
1. Tixgħil / Mitfi
- Biex tixgħel, agħfas u żomm il-buttuna tal-qawwa sakemm id-displej jixgħel.
- To power off, press and hold the power button until the display indicates shutdown, then release.
2. Printing a Receipt
- Ensure the printer is powered on and connected to your host device.
- Open the application on your host device that generates receipts or invoices.
- Initiate the print command from your application. The PB51 is designed for 20-30% faster time-to-receipt printing.
- The printer will automatically feed and print the receipt.
- Tear off the receipt along the serrated edge.
3. L-Użu tad-Displej LCD
The standard LCD display provides important information about the printer's status, battery level, connectivity, and error messages. Use the navigation buttons (if present) to scroll through menu options and settings.
Manutenzjoni
1. Tindif tar-Ras tal-Istampar
- Itfi l-istampatur u skonnettjah minn kwalunkwe sors ta' enerġija.
- Iftaħ il-kompartiment tal-karta.
- Gently wipe the print head surface with a lint-free cloth dampened b'alkoħol isopropiliku.
- Ħalli r-ras tal-istampar tinxef kompletament qabel ma tagħlaq l-għatu u tixgħel il-printer.
- Perform this cleaning regularly, especially if print quality degrades.
2. Kura tal-batterija
- Biex timmassimizza l-ħajja tal-batterija, evita li tiċċarġja kompletament il-batterija ta' spiss.
- Aħżen il-printer u l-batterija f'post frisk u niexef meta ma tkunx qed tużahom għal perjodi twal.
- Use only genuine Intermec replacement batteries.
3. Tindif Ġenerali
Imsaħ il-barra tal-istampatur b'ċarruta ratba u damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquid enters the printer's openings.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-printer mhux qed jixgħel | Low or dead battery; faulty power adapter; loose battery connection. | Charge the battery; check power adapter connection; re-seat the battery. |
| L-ebda output tal-istampar | No paper; paper loaded incorrectly; connectivity issue; print head dirty. | Load paper correctly; check Bluetooth/USB/Serial connection; clean print head. |
| Kwalità fqira tal-istampar | Dirty print head; incorrect paper type; low battery. | Clean print head; ensure thermal paper is used; charge battery. |
| Kwistjonijiet ta' konnettività | Incorrect pairing; driver issues; out of range. | Re-pair Bluetooth; reinstall drivers; move closer to host device. |
If the problem persists after attempting these solutions, please contact Intermec customer support.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | PB51B33004100 |
| Teknoloġija tal-Istampar | Termali Diretti |
| Output Printer | Monokromu |
| Daqs Massimu tal-Midja | 4 pulzieri |
| Teknoloġija tal-Konnettività | USB, Serial, Bluetooth |
| Piż tal-oġġett | 42 Uqija (madwar 2.63 lbs) |
| Dimensjonijiet tal-Pakkett | 10.2 x 10 x 5 pulzieri |
| Tip ta' Kontrollur | Android (kompatibbli) |
| Manifattur | Intermec |
Garanzija u Appoġġ
Specific warranty information for the Intermec PB51 printer is not available in this document. Please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) websit għal termini u kundizzjonijiet dettaljati tal-garanzija.
For technical support, service, or to purchase accessories, please contact your authorized Intermec/Honeywell dealer or visit their official support portal.
