1. Prodott Aktarview
The Escali DR1 Digital Kitchen Timer is designed for precise time management in various settings. It features an extra-large display for easy readability, countdown and count-up functions, a clock mode, and convenient mounting options.

Figura 1: Quddiem view of the Escali DR1 Digital Kitchen Timer, showing the large display and control buttons.

Figure 2: Diagram of the Escali DR1 Digital Kitchen Timer, highlighting its key features including the timer display, clock mode, alarm, maximum timer range, recall function, and storage options.
2. Setup
2.1 Installazzjoni tal-batterija
The Escali DR1 timer requires one (1) AAA battery (included). To install or replace the battery:
- Locate the battery compartment cover on the back of the timer.
- Żerżaq l-għatu 'l isfel biex tiftaħ il-kompartiment.
- Daħħal batterija AAA waħda, waqt li tiżgura l-polarità korretta (+/-) kif indikat ġewwa l-kompartiment.
- Żerġa l-għatu fil-post sakemm tikklikkja sew.

Figura 3: Wara view of the Escali DR1 Digital Kitchen Timer, illustrating the battery compartment and the integrated kickstand.
2.2 Għażliet ta' Tqegħid
The timer offers two convenient placement methods:
- Dahar manjetiku: Utilize the strong magnet on the back of the timer to attach it to metallic surfaces such as refrigerators or ovens.
- Kickstand: Extend the built-in kickstand on the back to place the timer upright on any flat surface, including countertops or tables.

Figure 4: The Escali DR1 Digital Kitchen Timer shown magnetically attached to a refrigerator door.
3. Istruzzjonijiet Operattivi
3.1 Funzjonijiet tal-buttuni
- Buttuna M: Used to set minutes for the timer or adjust hours in clock mode.
- Buttuna S: Used to set seconds for the timer or adjust minutes in clock mode.
- Buttuna START/STOP: Initiates or pauses the timer.
- Funzjoni ĊARA: Pressing the M and S buttons simultaneously clears the current timer setting.
3.2 Issettjar tal-Arloġġ
When the timer is not actively counting, it displays the time in clock mode. The format can be 12-hour or 24-hour.
- To adjust the time, press and hold the BIDU/WAQQF Agħfas il-buttuna għal madwar 3 sekondi sakemm iċ-ċifri tas-sigħat jibdew jteptep.
- Agħfas il- M buttuna biex taġġusta s-sigħat.
- Agħfas il- S buttuna biex taġġusta l-minuti.
- Agħfas il- BIDU/WAQQF Agħfas il-buttuna mill-ġdid biex tikkonferma l-ħin u toħroġ mill-modalità tas-settings.
- Biex taqleb bejn il-format ta' 12-il siegħa u ta' 24 siegħa, agħfas il-buttuna M button while the hours are flashing.
3.3 Setting a Countdown Timer
The maximum countdown time is 99 minutes and 59 seconds.
- Ensure the timer display shows "00 M 00 S". If not, press the M u S buttons simultaneously to clear any previous setting.
- Agħfas il- M button repeatedly to set the desired minutes. Hold the button for faster adjustment.
- Agħfas il- S button repeatedly to set the desired seconds. Hold the button for faster adjustment.
- Agħfas il- BIDU/WAQQF buttuna biex tibda l-countdown.
3.4 Starting, Pausing, and Stopping the Timer
- Biex tibda the timer after setting, press the BIDU/WAQQF buttuna.
- Biex waqfa the timer during countdown, press the BIDU/WAQQF button once. The display will flash.
- Biex jerġa’ jibda the timer, press the BIDU/WAQQF buttuna għal darb'oħra.
- Biex waqqaf the timer and reset it to the last set time, press the BIDU/WAQQF buttuna waqt li t-tajmer ikun waqfa.
3.5 Clearing the Timer
To clear the current timer setting and return the display to "00 M 00 S", press the M u S buttuni fl-istess ħin.
3.6 Recall Last Timer Setting
The timer can recall the last set countdown time. After the timer has been cleared or stopped, press the BIDU/WAQQF button once to display the previously set time. This is useful for repetitive tasks.
3.7 Count-Up (Stopwatch) Function
Biex tuża t-tajmer bħala kronometru:
- Ensure the timer display shows "00 M 00 S". If not, press the M u S buttons simultaneously to clear any previous setting.
- Agħfas il- BIDU/WAQQF button. The timer will begin counting upwards from "00 M 00 S".
- Agħfas il- BIDU/WAQQF button to pause the count-up.
- Agħfas il- BIDU/WAQQF button again to resume or press M u S simultaneously to clear.
3.8 Alarm and LED Indicator
When the countdown timer reaches zero, an audible alarm will sound, and the red LED indicator light will flash to signal that the set time has elapsed. Press any button to silence the alarm.
4. Manutenzjoni
4.1 Tindif
To clean the timer, wipe it with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water. Ensure the timer is dry before storage or next use.
4.2 Sostituzzjoni tal-batterija
Replace the AAA battery when the display becomes dim or the timer functions erratically. Refer to section 2.1 for battery installation instructions.
4.3 Ħażna
Store the timer in a cool, dry place when not in use. If storing for an extended period, it is recommended to remove the battery to prevent leakage.
5 Issolvi l-problemi
- Id-displej huwa vojt jew mudlam: Check if the battery is installed correctly and has sufficient power. Replace the AAA battery if necessary.
- Timer not responding to button presses: Ensure the battery is properly seated. Try removing and reinserting the battery to perform a soft reset.
- L-allarm ma ħossx: Verify that the timer is counting down correctly. If the display shows "00 M 00 S" and the LED flashes but no sound, the speaker may be obstructed or faulty.
- Timer does not turn off: The Escali DR1 timer is designed to always display either the timer or the clock. It does not have a dedicated power-off button. To conserve battery during long periods of non-use, remove the battery.
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | DR1 |
| Medda ta' Timer | 99 minutes, 59 seconds (max) |
| Daqs tal-Wiri | 1.5 inches (digit height) |
| Dimensjonijiet tal-Prodott | 3.5"D x 3.25"W x 0.75"H |
| Piż tal-oġġett | 2.4 uqija |
| Sors tal-Enerġija | 1 x Batterija AAA (inkluża) |
| Materjal | Plastik |
| Kulur | Large White |
| Komponenti Inklużi | Timer, Battery |
7. Garanzija
The Escali DR1 Digital Kitchen Timer is covered by a 2-year warranty on product and parts from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
8. Appoġġ
For further assistance, technical support, or warranty inquiries, please contact Escali customer service. Refer to the official Escali webis-sit jew l-imballaġġ tal-prodott għal informazzjoni ta' kuntatt attwali.





