Introduzzjoni
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Micro MMD007 Deluxe Mini Scooter. Please read this manual thoroughly before first use and retain it for future reference. The Micro MMD007 Deluxe Mini Scooter is designed for children aged 3 years and up, with a maximum load capacity of 35 kg. It features a telescopic handlebar for adjustable height.
Informazzjoni dwar is-Sigurtà
Twissija: Always wear a helmet and protective gear (wrist guards, elbow pads, knee pads) when riding the scooter. Adult supervision is required at all times.
- Kun żgur li l-mekkaniżmi kollha tal-illokkjar huma mwaħħlin sew qabel kull użu.
- Do not ride on public roads, uneven surfaces, or near traffic.
- Avoid riding in wet conditions, at dusk, or at night.
- L-iskuter huwa ddisinjat għal rikkieb wieħed biss.
- Regularly check for loose parts, wear, or damage. Do not use if damaged.
- Familiarize yourself with the braking mechanism before riding.
Setup
The Micro MMD007 Deluxe Mini Scooter requires minimal assembly.
- Handlebar Insertion: Insert the handlebar stem into the opening on the scooter deck until it clicks securely into place. Ensure the locking mechanism is engaged.
- Aġġustament tal-għoli tal-manubriju: The telescopic handlebar can be adjusted to suit the rider's height.
- Sib il-klamp li jinħall malajramp fuq iz-zokk tal-manubriju.
- Iftaħ il-clamp, adjust the handlebar to the desired height (between 48 cm and 64 cm), and then securely close the clamp.
- Ensure the handlebar is firmly locked and does not move up or down.
- Kontroll ta' Qabel is-Sewqan: Before the first ride, and before every subsequent ride, verify that all components are securely attached and in good working order. Check the wheels, brakes, and handlebar for any looseness or damage.
Istruzzjonijiet Operattivi
The Micro MMD007 Deluxe Mini Scooter is designed for intuitive riding.
- Bidu: Place one foot on the scooter deck and use the other foot to push off the ground.
- Tmexxija: The scooter uses a lean-to-steer mechanism. To turn, lean your body in the desired direction. The handlebar will follow your lean.
- Ibbrejkjar: The scooter is equipped with a rear brake. To slow down or stop, gently press your foot down on the brake pedal located above the rear wheel. Apply pressure gradually to avoid sudden stops.
- Waqfien: Once stopped, place both feet on the ground.
Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u t-tħaddim sikur tal-iskuter tiegħek.
- Tindif: Imsaħ l-iskuter nadif b'reklamaramp cloth after use. Avoid using harsh chemicals or abrasive cleaners. Do not hose down or immerse the scooter in water.
- Spezzjoni tar-rota: Periodically check the wheels for wear and tear. Ensure they spin freely and are not obstructed by debris.
- Kontroll tal-Brejk: Verify that the rear brake functions effectively. The brake should engage smoothly and stop the scooter efficiently.
- Iċċekkja tal-Qafliet: Spezzjona regolarment il-viti, il-boltijiet u l-klampi kollhaamps to ensure they are tight. Tighten any loose fasteners as needed.
- Ħażna: Aħżen l-iskuter f'post xott, 'il bogħod mix-xemx diretta u minn temperaturi estremi, biex tevita d-degradazzjoni tal-materjal.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-manubriju huwa maħlul jew jitħarrek. | Quick-release clamp not fully tightened or handlebar not fully inserted. | Ensure the handlebar stem is fully inserted until it clicks. Tighten the quick-release clamp sikur. |
| Scooter does not steer smoothly. | Debris in steering mechanism or worn components. | Inspect the steering mechanism for any obstructions. Clean if necessary. If the issue persists, contact customer support. |
| Brake is not effective. | Kuxxinett tal-brejk mikul jew debris. | Check the brake pad for wear. Clean any debris from the brake area. If the brake pad is worn, it may need replacement. |
| Ir-roti ma jdurux liberament. | Debris in wheel bearings or tight axles. | Remove any visible debris from around the wheels and axles. Ensure axle bolts are not overtightened. |
Speċifikazzjonijiet
- Mudell: MMD007
- Ditta: Mikro
- Medda ta' Età: 3 snin 'il fuq
- Kapaċità massima tat-Tagħbija: 35 kg
- Għoli tal-manubriju: Adjustable from 48 cm to 64 cm
- Tip ta' brejk: Ibbrejkjar ta' wara
- Materjal tal-qafas: Metall
- Materjal tar-rota: Plastik
- Numru ta' Roti: 3
- Dimensjonijiet tal-Prodott: Madwar 60.96 x 15.24 x 27.94 ċm (T x W x H)
- Piż tal-oġġett: Madwar 1.95 kg
- Karatteristiċi Speċjali: Jintrewa, Ħafif
Garanzija u Appoġġ
For information regarding warranty coverage, replacement parts, or customer support, please refer to the official Micro Mobility Systems webis-sit jew ikkuntattja lill-bejjiegħ lokali tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
