Weiser Powerbolt Electronic Deadbolt (Model 9GED14600-101) User Manual

1. Introduzzjoni

This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.

Figura 1: Quddiem view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.

2. Informazzjoni Importanti dwar is-Sigurtà

Osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korriment jew ħsara lill-prodott:

• Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
• Uża biss it-tip ta’ batterija speċifikat (4 batteriji AA). Tħallatx batteriji qodma u ġodda jew tipi differenti ta’ batteriji.
• Keep all components, especially small parts, out of reach of children.
• Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
• Protect the keypad from excessive moisture or direct water exposure.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• Assemblaġġ tat-Tastiera Esterni
• Interior Assembly (Turn Knob)
• Lukkett Deadbolt
• Strike Plate
• Pjanċa tal-Immuntar
• Viti tal-Immuntar
• Ċwievet (2)
• SmartKey Learning Tool
• Installation Guide / Drilling Template

Figura 2: Ġenb view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.

4. Istruzzjonijiet ta 'installazzjoni

Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.

1. Ipprepara l-Bieb: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
2. Installa l-lukkett: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
3. Installa t-Tastiera Esterna: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
4. Installa Pjanċa tal-Immuntar: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
5. Qabbad Kejbils: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
6. Installa l-Assemblea Intern: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
7. Installa Batteriji: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
8. Operazzjoni tat-Test: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.

5. Programming Instructions

The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.

Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.

5.1. Setting the Master Code

The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.

1. Press the "Program" button (usually located on the interior assembly).
2. Daħħal Kodiċi Prinċipali ġdid ta' 4-8 ċifri.
3. Press the "Lock" button.
4. Re-enter the new Master Code.
5. Press the "Lock" button again. A successful programming tone will sound.

5.2. Żieda ta' Kodiċijiet tal-Utent

You can store up to 6 unique user codes for access.

1. Daħħal il-Kodiċi Prinċipali tiegħek.
2. Press the "Program" button.
3. Press "1" (for adding a user code).
4. Daħħal Kodiċi tal-Utent ġdid ta' 4-8 ċifri.
5. Press the "Lock" button. A successful programming tone will sound.

5.3. Tħassir tal-Kodiċijiet tal-Utent

1. Daħħal il-Kodiċi Prinċipali tiegħek.
2. Press the "Program" button.
3. Press "2" (for deleting a user code).
4. Daħħal il-Kodiċi tal-Utent li tixtieq tħassar.
5. Press the "Lock" button. A successful programming tone will sound.

5.4. Enabling/Disabling Auto-Lock

The lock can be set to automatically re-lock 30 seconds after unlocking.

• Biex Jippermetti: Enter Master Code, press "Program", press "3", press "Lock".
• Biex Tiskonnettja: Enter Master Code, press "Program", press "4", press "Lock".

6. Istruzzjonijiet Operattivi

6.1. Illokkjar tal-Bieb

• Minn Barra: Agħfas il-buttuna "Lock" fuq it-tastiera. Id-deadbolt se jinfirex.
• Mill-Intern: Rotate the turn knob to the locked position.

6.2. Kif tiftaħ il-bieb

• L-Użu ta' Kodiċi tal-Utent: Enter a valid 4-8 digit User Code on the keypad. The deadbolt will retract.
• Bl-użu ta' Ċavetta: Insert the key into the keyhole and turn to unlock.
• Mill-Intern: Rotate the turn knob to the unlocked position.

7. Manutenzjoni

7.1. Sostituzzjoni tal-batterija

The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.

1. Neħħi l-għatu tal-batterija fuq l-assemblaġġ intern.
2. Neħħi l-batteriji qodma.
3. Daħħal żewġ batteriji alkalini AA ġodda, waqt li tiżgura l-polarità korretta (+/-).
4. Ibdel l-għatu tal-batterija.

Nota: Replacing batteries does not erase programmed codes.

7.2. Tindif

Naddaf is-serratura b'drapp artab u damp drapp. Evita prodotti tat-tindif jew solventi li joborxu, għax dawn jistgħu jagħmlu ħsara lill-finitura u lill-komponenti elettroniċi.

7.3. SmartKey Rekeying

The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.

8 Issolvi l-problemi

9. Speċifikazzjonijiet tal-Prodott

• Mudell: 9GED14600-101
• Ditta: Weiser
• Tip ta' serratura: Tastiera Elettronika Deadbolt
• Materjal: Ram
• Kulur: Deheb
• Dimensjonijiet (L x W x H): 6 x 11.13 x 4 pulzieri
• Piż tal-oġġett: 2.4 liri
• Sors tal-Enerġija: 4 Batteriji AA (mhux inklużi)
• Karatteristika Speċjali: Battery Indicator, SmartKey Rekeying
• Dahar lura: Aġġustabbli 2-3/8" jew 2-3/4"
• Bore Hole: 2-1/8"
• Kodiċi tal-Utent: Sa 6
• ANSI/BHMI Rating: Grad 3

10. Garanzija u Appoġġ għall-Klijent

For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser webis-sit jew fl-imballaġġ tal-prodott.

Weiser Official Websit: www.weiserlock.com

Please have your model number (9GED14600-101) and purchase date available when contacting support.