Manwal tal-Utent tal-Arloġġ tal-Ħajt Kontrollat ​​bir-Radju Acctim 74314 Parona

1. Introduzzjoni

Thank you for choosing the Acctim 74314 Parona Radio Controlled Wall Clock. This clock is designed for precise timekeeping, automatically synchronizing with the UK's atomic clock transmitter (MSF signal) for accurate time and automatic adjustment for daylight saving changes. This manual provides essential information for setting up, operating, and maintaining your new clock.

2. Informazzjoni dwar is-Sigurtà

• Use only the specified battery type (1 x AA Alkaline battery).
• Tħallatx batteriji qodma u ġodda, jew tipi differenti ta 'batteriji.
• Neħħi l-batteriji eżawriti minnufih biex tevita t-tnixxija u l-ħsara.
• Żomm il-batteriji fejn ma jintlaħaqx mit-tfal.
• Tesponix l-arloġġ għal temperaturi estremi, dawl tax-xemx dirett, jew umdità għolja.
• Avoid dropping or subjecting the clock to strong impacts.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-pakkett tiegħek fih l-oġġetti li ġejjin:

• Acctim 74314 Parona Radio Controlled Wall Clock
• Manwal għall-Utent (dan id-dokument)

Nota: 1 x AA battery is required and not included in the package.

4. Istruzzjonijiet ta' Setup

Follow these steps to set up your Acctim Radio Controlled Wall Clock:

1. Daħħal il-batterija: Locate the battery compartment on the back of the clock. Insert one new AA Alkaline battery, ensuring the correct polarity (+/-). We recommend using Energizer or Panasonic batteries for optimal performance.
2. Initial Hand Movement: Upon battery insertion, the second hand will begin to turn clockwise and stop at the 12 o'clock position. Within a few minutes, the minute and hour hands will also move to the 12 o'clock position.
3. Riċeviment tas-Sinjal: The clock will then enter receiving mode to search for the MSF radio signal. This process can take some time. For best results, place the clock near a window and away from electronic devices that might cause interference.
4. Overnight Synchronization: It is highly recommended to leave the clock undisturbed overnight for signal reception. The MSF signal transmission is generally stronger and more reliable during nighttime hours.
5. L-issettjar tal-ħin awtomatiku: Once the clock successfully receives the signal, it will automatically set itself to the correct time, including adjusting for summer/winter time changes.

Figura 1: Wara view of the clock, highlighting the battery compartment.

Figura 2: Quddiem view of the Acctim 74314 Parona Wall Clock.

5. Istruzzjonijiet Operattivi

Once successfully set up, your Acctim Radio Controlled Wall Clock operates automatically:

• Sinkronizzazzjoni Awtomatika tal-Ħin: The clock continuously monitors the MSF radio signal to maintain accurate time.
• Aġġustament tal-Ħin tas-Sajf (DST): The clock will automatically adjust for summer and winter time changes, eliminating the need for manual adjustments.
• Regular Signal Checks: To ensure ongoing accuracy, the clock will search for the time signal every second hour, starting at 1 o'clock, 3 o'clock, 5 o'clock, and so on.

6. Manutenzjoni

• Tindif: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Sostituzzjoni tal-batterija: When the clock stops or the hands move erratically, it is time to replace the battery. Follow the battery insertion steps in the "Setup Instructions" section. Always use a new AA Alkaline battery.
• Ħażna: If the clock will not be used for an extended period, remove the battery to prevent potential leakage.

7 Issolvi l-problemi

Nota Importanti: The Radio Controlled signal will be off-air due to scheduled annual maintenance between 3rd and 21st September (8am - 6pm). During this period, the clock may not be able to receive the signal and set itself automatically.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Acctim customer service directly. Contact details can typically be found on the manufacturer's official webis-sit jew fuq l-imballaġġ tal-prodott.