Mounting Dream MD5401 Height Adjustable Speaker Stands

Introduzzjoni

Thank you for choosing the Mounting Dream MD5401 Height Adjustable Speaker Stands. These stands are designed to provide a stable and adjustable platform for your speakers, enhancing your audio experience by allowing optimal positioning. Please read this manual thoroughly before assembly and use to ensure safe and correct installation.

Image: Two Mounting Dream MD5401 speaker stands with speakers, showcasing their design and application.

Informazzjoni dwar is-Sigurtà

• Kun żgur li l-komponenti kollha huma preżenti u mhux imħassra qabel l-assemblaġġ. Tużax jekk xi partijiet huma neqsin jew difettużi.
• Do not exceed the maximum weight capacity of 11 lbs (5 kg) per stand. Overloading can cause instability and damage.
• Assemble the stands on a flat, stable surface.
• Żomm partijiet żgħar 'il bogħod mit-tfal biex tevita perikli ta' fgar.
• Iċċekkja perjodikament il-konnessjonijiet u l-qafliet kollha biex tiżgura li jibqgħu sikuri.
• Place stands in a low-traffic area to minimize the risk of accidental bumps or tipping.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-komponenti kollha li ġejjin huma inklużi fil-pakkett tiegħek:

• Speaker Stand Bases (2)
• Lower Support Tubes (2)
• Upper Adjustable Tubes (2)
• Speaker Mounting Plates/Brackets (2 sets)
• Height Adjustment Knobs (2)
• Assorted Screws and Washers for Speaker Attachment
• Rabtiet tal-Kejbils (għall-immaniġġjar tal-kejbils)
• Manwal ta' Istruzzjoni

Setup u Assemblea

Follow these steps to assemble your speaker stands:

1. Attach the Lower Support Tube to the Base: Securely fasten the lower support tube to the heavy-duty triangle base using the provided screws. Ensure it is tightened for maximum stability.
2. Insert the Upper Adjustable Tube: Slide the upper adjustable tube into the lower support tube.
3. Attach the Speaker Mounting Plate: Secure the speaker mounting plate to the top of the upper adjustable tube.
4. Attach Your Speaker: The MD5401 stands offer multiple attachment options for various speaker types. Identify the appropriate method for your speaker:
   
   
   

   Image: Speaker attachment methods, including flat panel hole, inset hole, and keyhole options.

   • Hole on Flat Panel: Use the provided screws to attach speakers with a flat back panel and a screw hole.
   • Inset Hole: For speakers with an inset screw hole, use the appropriate screw and spacer.
   • Keyhole: For speakers with a keyhole slot, align and secure the speaker using the keyhole attachment.

   Nota: The metric screws included may not fit Samsung HW-Q90R speakers. For Samsung Q-series Rear Speakers, please refer to speaker stand MD5402.

   

   Image: Recommended speaker size and mounting plate dimensions for compatibility.

5. Ġestjoni tal-Kejbil: Utilize the built-in cable hole (0.6" W x 1.2" H) to route speaker wires for a clean and organized appearance. Use the included cable ties to secure the wires along the stand tube.
   
   
   

   Image: Detail of the cable management system with a cable routed through the stand.

Tħaddim u Użu

The MD5401 speaker stands are designed for easy height adjustment and stable placement.

• Aġġustament Għoli: The extendable tube allows for height adjustment up to a maximum of 39 inches. Loosen the height adjustment knob, slide the upper tube to your desired height, and then securely tighten the knob to lock it in place. This allows for optimum acoustics based on your listening position.
  
  
  

  Image: Visual guide for adjusting the speaker stand height.

  

  Image: Speakers positioned at optimal listening height for an immersive audio experience.
• Pjazzament Stabbli: The heavy-duty cast iron base provides excellent stability on various floor types, including carpet, hardwood, and tile. Anti-slip pads are included to prevent scratching your floor.
  
  
  

  Image: The stable base of the speaker stand on various floor surfaces.

  

  Image: The speaker stand demonstrating its stability and 11 lbs weight capacity.

Manutenzjoni

To ensure the longevity and optimal performance of your speaker stands, follow these simple maintenance guidelines:

• Tindif: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp Jista' jintuża drapp, segwit minn tnixxif immedjat. Evita prodotti tat-tindif jew solventi li joborxu.
• Iċċekkja tal-Qafliet: Periodically inspect all screws and connections to ensure they are tight. Re-tighten if necessary to maintain stability.
• Spezzjoni tal-Cable: Check speaker cables for any signs of wear or damage, especially where they pass through the cable management hole. Replace damaged cables immediately.

Issolvi l-problemi

If you encounter any issues with your speaker stands, refer to the following common problems and solutions:

Speċifikazzjonijiet

• Mudell: MD5401
• Ditta: Dream Dream
• Materjal: Cast Iron (Base), Steel (Tubes)
• Kulur: Iswed
• Kapaċità tal-piż: Up to 11 lbs (5 kg) per stand
• Għoli aġġustabbli: Max 39 inches
• Dimensjonijiet tal-Prodott: 48.11 x 11.06 x 11.06 pulzieri (immuntat, approssimattiv)
• Piż tal-oġġett: 8.1 liri (kull par)
• Cable Management Hole Dimensions: 0.6 pulzieri (W) x 1.2 pulzieri (H)

Garanzija u Appoġġ għall-Klijent

Mounting Dream is committed to providing high-quality products and excellent customer service.

• Appoġġ għall-Klijent Ibbażat fl-Istati Uniti: Our team is available to provide pre-sale and after-sale support, as well as consulting services on product use and installation.
• Garanzija: Please refer to the product packaging or official Mounting Dream websit għal dettalji speċifiċi tal-garanzija.
• Informazzjoni ta' Kuntatt: For assistance, please visit the official Mounting Dream webis-sit jew ikkuntattja l-linja tas-servizz tal-klijenti tagħhom.