1. Introduzzjoni
This manual provides comprehensive instructions for the proper installation, safe operation, and routine maintenance of your Winjet CFWJ-0372-Y Yellow Fog Light Kit. This kit is specifically designed for the Scion Tc 2014 model. Please read this manual thoroughly before attempting installation or operation to ensure correct usage and to prevent damage to the product or vehicle.
2. Kontenut tal-Pakkett
Verify that all components listed below are present in your package. If any items are missing or damaged, please contact your retailer.
- One (1) Pair of Winjet Yellow Fog Light Assemblies (Left and Right)
- One (1) Complete Wiring Harness
- One (1) Relay
- One (1) Fog Light Switch (Push-button On-Off)
- Two (2) H11 Halogen Bulbs
- Mounting Hardware (as required)
Image: A complete fog light kit including the left and right fog light assemblies, a wiring harness with a relay, and a separate fog light switch.
3. Karatteristiċi ewlenin
- OEM Fitment: Designed for a precise fit on the Scion Tc 2014, ensuring no modifications are needed for installation.
- Kostruzzjoni Durabbli: Manufactured from high-quality OEM grade ABS plastic for longevity.
- Reżistenza għat-temp: Features a triple-layer protection system (water-repellent coating, UV filter coating, impact-resistant coating) and is rated IP68 for waterproof and dustproof performance, protecting against immersion in water up to 3 feet.
- Legali fit-Triq: SAE/DOT compliant, meeting all regulations for street use in USA & Canada.
- Viżibilità Mtejba: Provides additional illumination to improve driving safety during adverse weather conditions such as heavy rain, snow, dense fog, and nighttime.
- Kit Tlesti: Includes a pair of H11 halogen bulbs, a wiring harness, relay, and a push-button switch for a comprehensive installation solution.
Image: Illustration of OEM fitment and the included H11 factory-grade light bulbs.
Image: Visual representation of the triple layer protection and IP68 waterproof and dustproof features.
Image: Depiction of enhanced driving safety in fog, rain, and snow, alongside the SAE/DOT compliance stamp.
4. Informazzjoni dwar is-Sigurtà
Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage.
- Installazzjoni Professjonali Rakkomandata: If you are not familiar with automotive electrical systems or vehicle modifications, it is highly recommended to seek professional installation.
- Skonnettja l-batterija: Before beginning any electrical work, always disconnect the vehicle's negative battery terminal to prevent electrical shock or short circuits.
- Ilbes Tagħmir tas-Sigurtà: Uża tagħmir protettiv personali xieraq, bħal nuċċalijiet u ingwanti tas-sigurtà, waqt l-installazzjoni.
- Stabbiltà tal-Vettura: Ensure the vehicle is parked on a level surface with the parking brake engaged. If lifting the vehicle, use appropriate jack stands.
- Prekawzjonijiet tal-Wiring: Ensure all wiring is routed away from hot engine components, moving parts, and sharp edges. Secure wiring with zip ties or clips to prevent chafing or damage.
5. Istruzzjonijiet ta 'installazzjoni
This fog light kit is designed for a bolt-on installation with no modification needed, offering a plug-and-play experience. The following steps provide a general guide. Consult your vehicle's service manual for specific panel removal and access procedures.
- Preparazzjoni: Park your vehicle on a level surface, turn off the engine, and engage the parking brake. Disconnect the negative terminal of the vehicle's battery.
- Access Fog Light Area: Depending on your vehicle model, you may need to remove front bumper covers, fender liners, or other components to access the factory fog light mounting locations.
- Remove Existing Fog Lights (if applicable): If your vehicle has existing fog lights, carefully disconnect their wiring and remove the assemblies.
- Mount New Fog Lights: Install the Winjet fog light assemblies into the designated mounting points. Secure them using the provided hardware. Ensure they are firmly seated and properly aligned.
- Konnessjoni tal-Wiring:
- Connect the fog light bulbs to the new fog light assemblies.
- Connect the wiring harness to the fog light assemblies.
- Route the wiring harness through the engine bay to the battery and the cabin for the switch. Ensure the relay is mounted in a secure, dry location.
- Connect the power wire from the harness to the positive terminal of the battery (or a suitable fused power source).
- Connect the ground wire from the harness to a clean, unpainted metal surface on the vehicle chassis.
- Install Fog Light Switch: The included push-button switch can be located anywhere on the dash using its 3M adhesive pad. Connect the switch wiring to the main harness as per the wiring diagram (not provided in this general guide, refer to specific kit instructions if available).
- Funzjonalità tat-Test: Reconnect the vehicle's negative battery terminal. Turn on your vehicle's ignition and test the fog lights using the newly installed switch. Verify both lights illuminate correctly.
- Assigura u Erġa' Arma: Once functionality is confirmed, secure all wiring with zip ties to prevent movement or damage. Reinstall any removed vehicle components (bumper covers, fender liners, etc.).
6. Operazzjoni
The Winjet CFWJ-0372-Y fog lights are operated via the included push-button switch.
- Tixgħel: Press the fog light switch to activate the fog lights. An indicator light on the switch (if present) will illuminate.
- Itfi: Press the fog light switch again to deactivate the fog lights.
Fog lights are designed to provide additional illumination close to the ground, improving visibility in conditions such as fog, heavy rain, or snow. They are not intended as a substitute for headlights.
7. Manutenzjoni
Regular maintenance ensures the longevity and optimal performance of your fog lights.
- Tindif: Clean the fog light lenses periodically with a soft cloth, mild soap, and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens coating.
- Spezzjoni: Regularly inspect the fog light assemblies, wiring, and connections for any signs of damage, corrosion, or loose components. Address any issues promptly.
- Sostituzzjoni tal-bozza: If a bulb burns out, replace it with an H11 type halogen bulb. Ensure the replacement bulb matches the specifications to maintain proper light output and avoid damage to the housing. Disconnect the battery before replacing bulbs.
8 Issolvi l-problemi
If you encounter issues with your fog light kit, refer to the following common troubleshooting steps:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Fog lights do not turn on | Blown fuse, loose wiring connection, faulty bulb, faulty switch | Check the fuse in the wiring harness. Inspect all wiring connections for tightness. Test or replace bulbs. Test the switch. |
| One fog light does not turn on | Faulty bulb, loose connection to that specific light | Replace the bulb. Check the wiring connection to the non-functional light. |
| Fog lights flicker | Loose wiring, poor ground connection | Inspect all wiring connections, especially the ground wire, for secure contact. |
| Is-swiċċ mhux jaħdem | Loose connection to switch, faulty switch | Check switch wiring. If connections are secure, the switch may need replacement. |
If these steps do not resolve the issue, please contact customer support or a qualified automotive technician.
9. Speċifikazzjonijiet
| Numru tal-Mudell | CFWJ-0372-Y |
| Numru tal-Parti tal-Manifattur | WJ30-0372-12 |
| Brand | Winjet |
| Tip ta 'Servizz tal-Vettura | Car (Scion Tc 2014) |
| Tip ta' Sors tad-Dawl | Halogen (H11) |
| Kulur tal-Lenti | Isfar |
| Pożizzjoni tal-Parti tal-Auto | Xellug, Dritt |
| Karatteristika Speċjali | Li ma jgħaddix ilma minnu (IP68) |
| Dimensjonijiet tal-Prodott (L x W x H) | 30.5 x 25.4 x 15.2 Ċentimetri (madwar) |
| Piż tal-oġġett | 1.37 kg (madwar) |
| Numri tal-Partijiet OEM | 81210-0W050, 81220-0W040 |
| Konformità | SAE/DOT Compliant |
10. Garanzija u Appoġġ
This Winjet fog light kit comes with a 12-il xahar garanzija mid-data tax-xiri, li tkopri difetti fil-manifattura. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
For technical support, warranty inquiries, or replacement parts, please contact your retailer or Winjet customer service through their official website. Provide your product model number (CFWJ-0372-Y) and date of purchase when contacting support.
