Manwal tal-Istruzzjonijiet tas-Subwoofer tal-Karozza Slim Active Powered ta' 10 pulzieri Rockville RW10CA

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Rockville RW10CA 10-inch Slim Active Powered Car Subwoofer. Please read this manual thoroughly before using your new subwoofer to ensure proper setup and optimal performance. Keep this manual for future reference.

Istruzzjonijiet tas-Sigurtà

• Always ensure proper ventilation around the subwoofer to prevent overheating.
• Tesponix l-unità għall-umdità jew temperaturi estremi.
• Disconnect the vehicle's battery before performing any electrical connections.
• Use appropriate gauge wiring for power and ground connections to prevent fire hazards.
• Securely mount the subwoofer to prevent movement during vehicle operation.
• Ikkonsulta installatur professjonali tal-awdjo tal-karozzi jekk m'intix ċert dwar xi passi tal-installazzjoni.

Karatteristiċi

• High-Power Bass Output: Delivers 800W peak and 200W RMS for deep, clean bass.
• SLIM Low-Profile Disinn: Only 2.7" tall, fits under seats or in tight spaces.
• Mibnija fil- Ampaktar ħaj: Integrata amplifier with adjustable input sensitivity, 50Hz-150Hz low-pass filter, and bass boost.
• Installazzjoni faċli: Includes remote bass knob and mounting hardware for straightforward setup.
• Kompatibilità Wiesgħa: Features high-level inputs with auto turn-on, compatible with most OEM or aftermarket car stereos.
• Thermal Protection Circuitry: Prevents overheating for safe and reliable operation.

Kontenut tal-Pakkett

• Subwoofer magħluq
• Buttuna tal-Bass mill-Bogħod
• Remote Bass Knob Wire
• Viti u Ħardwer tal-Immuntar
• High Level Input Wire
• Manwal għall-Utent (dan id-dokument)

Speċifikazzjonijiet

Setup u Installazzjoni

The Rockville RW10CA is designed for easy installation in various vehicle types. Its slim profile allows for flexible placement options.

Għażliet ta 'Pjazzament

Due to its ultra-slim design (2.7" height), the RW10CA can be installed in tight spaces, such as:

• Under the driver's or passenger's seat.
• In the trunk or cargo area.
• Mounted to the back of a seat.

Image: The Rockville RW10CA subwoofer discreetly installed under a car seat, demonstrating its low-profile disinn.

Image: Visual representation of the ultra-slim dimensions of the Rockville RW10CA, highlighting its compact size for versatile placement.

Konnessjonijiet tal-Wiring

Ensure all connections are secure and properly insulated. Refer to the diagram below for terminal locations.

Image: The control panel of the RW10CA, illustrating the various input and power terminals for connection.

1. Qawwa (+12V): Connect this terminal to the positive (+) terminal of your vehicle's battery. Use appropriate gauge power wire and an inline fuse (25A, included).
2. Remot (REM): Connect this terminal to the remote turn-on lead from your head unit or an ignition-switched 12V source. This allows the subwoofer to turn on/off with your vehicle's audio system.
3. Art (GND): Connect this terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a solid ground connection to prevent noise.
4. Input RCA ta' Livell Baxx: Use RCA cables to connect your head unit's RCA outputs to the subwoofer's low-level inputs (L and R). This is the preferred method for optimal sound quality.
5. Input ta' Livell Għoli: If your head unit does not have RCA outputs, use the included high-level input wire harness. Connect the speaker wires from your head unit's speaker outputs to the corresponding terminals on the harness (L+, L-, R+, R-), then plug the harness into the "HI INPUT" port on the subwoofer.
6. Pum tal-bass mill-bogħod: Plug the remote bass knob wire into the "SUB LEVEL REMOTE CONTROL" port. Mount the remote knob in a convenient location for easy bass level adjustment.

Kontrolli Operattivi

The RW10CA features several adjustable controls to fine-tune your bass output to your preference.

Immaġni: Close-up view of the RW10CA's control panel, showing the adjustable knobs for phase, low pass filter, bass boost, and input gain.

• Power Status (Green/Red): The green LED indicates the unit is powered on and operating normally. The red LED indicates a protection mode (e.g., overheating, short circuit).
• Auto Turn On (On/Off): When set to "ON", the subwoofer will automatically turn on when an audio signal is detected through the high-level inputs. When set to "OFF", the remote turn-on lead (REM) must be used.
• Phase Shift (0°/180°): This switch allows you to change the phase of the subwoofer's output. Adjust this to ensure the subwoofer's bass output is in sync with the rest of your car's speakers, preventing cancellation or muddy sound.
• Low Pass Filter (50Hz - 150Hz): This adjustable crossover allows you to set the upper frequency limit for the subwoofer. Frequencies above the set point will be filtered out, ensuring only low bass notes are reproduced by the subwoofer.
• Bass Boost (0dB - +18dB @ 45Hz): This control allows you to increase the bass output at 45Hz, providing a more pronounced low-end response. Adjust to your preference.
• Input Gain (Min/Max): This knob adjusts the input sensitivity of the amplifier. It should be set to match the output level of your head unit. Start at minimum and slowly increase until you hear distortion, then back off slightly.

Image: The remote bass knob, allowing convenient adjustment of the subwoofer's output level from the driver's seat.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your Rockville RW10CA subwoofer.

• Tindif: Use a soft, dry cloth to clean the exterior of the subwoofer. Avoid using harsh chemicals or abrasive cleaners.
• Kontroll tal-Konnessjoni: Spezzjona perjodikament il-konnessjonijiet tal-wajers kollha biex tiżgura li huma sikuri u ħielsa mill-korrużjoni.
• Ventilazzjoni: Ensure the subwoofer's heat sinks are not obstructed to allow for proper cooling.

Issolvi l-problemi

If you experience issues with your RW10CA, refer to the following common problems and solutions:

• Ebda Qawwa: Check the power (+12V), remote (REM), and ground (GND) connections. Ensure the inline fuse is not blown. Verify the vehicle's battery has sufficient charge.
• Ebda Ħsejjes: Check all audio input connections (RCA or high-level). Verify the head unit is sending an audio signal. Adjust the "Input Gain" knob. Ensure the "Low Pass Filter" is set appropriately.
• Ħoss Mgħawġ: Reduce the "Input Gain" setting. Check for damaged speaker wires or loose connections. Ensure the head unit's volume is not excessively high.
• Subwoofer Overheating (Red Protection LED): Ensure adequate ventilation around the unit. Reduce the "Input Gain" or "Bass Boost" settings. Check for impedance mismatches or short circuits in the wiring.

Garanzija u Appoġġ

The Rockville RW10CA 10-inch Slim Active Powered Car Subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Rockville websit.

For technical support, troubleshooting assistance, or any other inquiries, please contact Rockville customer support:

• Websit: www.rockvilleaudio.com
• Email: support@rockvilleaudio.com
• Telefon: 1-646-758-0144 (Open 24/7)