1. Introduzzjoni
Thank you for choosing the Renkforce HD-WRCL135 Radio Wall Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.
2. Informazzjoni dwar is-Sigurtà
- Dan l-apparat huwa maħsub għall-użu fuq ġewwa biss.
- Do not expose the clock to direct sunlight, extreme temperatures, or high humidity.
- Uża biss it-tip ta' batterija speċifikat. Kun żgur li l-polarità tkun korretta meta ddaħħal il-batteriji.
- Neħħi l-batteriji jekk l-arloġġ ma se jintużax għal perjodu estiż biex tevita t-tnixxija.
- Żomm l-apparat fejn ma jintlaħaqx mit-tfal.
- Tippruvax tiżżarma jew timmodifika l-arloġġ. Dan jannulla l-garanzija.
3. Kontenut tal-Pakkett
- Renkforce HD-WRCL135 Radio Wall Clock
- Manwal għall-Utent
Il-batteriji mhumiex inklużi u għandhom jinxtraw separatament.
4. Prodott Aktarview
The Renkforce HD-WRCL135 is a 32 cm radio-controlled wall clock featuring an analog time display and a digital LCD for date, month, and day of the week. It automatically synchronizes with the DCF77 radio signal for precise timekeeping, including automatic daylight saving time adjustments.
Stampa 1: Quddiem view of the Renkforce HD-WRCL135 Radio Wall Clock, displaying the analog clock hands and the integrated LCD showing '29 8MON'.
5. Setup
5.1 Installazzjoni tal-batterija
- Sib il-kompartiment tal-batterija fuq wara tal-arloġġ.
- Insert the required batteries (e.g., 2 x AA, not included) according to the polarity markings (+ and -).
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
5.2 Setup Inizjali u Sinkronizzazzjoni tal-Ħin
Upon battery insertion, the clock will automatically attempt to receive the DCF77 radio signal to set the correct time and date. This process may take several minutes to an hour, depending on signal strength and location. The clock hands will move rapidly to the 12 o'clock position and then begin searching for the signal.
For optimal reception, place the clock near a window and away from electronic devices that may cause interference. A flashing radio signal icon on the LCD indicates that the clock is searching for the signal. Once synchronized, the icon will become steady.
5.3 Immuntar tal-ħajt
The clock is designed for wall mounting. Use a suitable screw or hook (not included) in your desired location. Ensure the mounting point is secure and can support the weight of the clock (approximately 896 grams / 1.98 pounds).
6. Joperaw
6.1 Automatic Time Synchronization (DCF77)
The Renkforce HD-WRCL135 clock uses the DCF77 radio signal from Mainflingen, Germany, to automatically set and maintain accurate time. This signal also ensures automatic adjustment for daylight saving time (DST). The clock will periodically check and update its time to ensure precision.
6.2 Manual Time and Language Setting
In areas with poor DCF77 signal reception, or if you wish to set the language for the LCD display, you can manually adjust the clock:
- Locate the 'SET TIME' and 'REC' buttons on the back of the clock.
- Press and hold the 'SET TIME' button for approximately 3 seconds until the year appears on the LCD display.
- Press the 'REC' button to increase the displayed value. Press 'SET TIME' to confirm and move to the next setting (month, day, hour, minute).
- To set the language, continue pressing 'SET TIME' through the time and date settings without making changes until the language option appears.
- Use the 'REC' button to cycle through available languages (e.g., ENG, GER, FRA, ITA). Press 'SET TIME' to confirm your language selection.
- After setting the language, press and hold the 'REC' button for 3 seconds. The radio controller icon on the LCD will begin to flash.
- Immediately place the clock in its final desired location. Do not move it until the radio controller icon stops flashing and becomes steady. This indicates successful synchronization. This process typically takes about 10 minutes.
6.3 Informazzjoni dwar id-Displej tal-LCD
The integrated LCD displays the following information:
- Data: Day of the month.
- Xahar: Ix-xahar kurrenti.
- Jum tal-Ġimgħa: Abbreviated day of the week.
- Daylight Saving Time Icon: An icon will appear when daylight saving time is active.
7. Manutenzjoni
- Tindif: Imsaħ l-arloġġ b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
- Sostituzzjoni tal-batterija: Replace batteries when the clock hands stop moving or the LCD display fades. Always replace all batteries at the same time with new ones of the same type.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Clock does not display time or LCD is blank. | Il-batteriji huma mejta jew imdaħħla ħażin. | Iċċekkja l-polarità tal-batterija. Ibdel b'batteriji ġodda. |
| Clock does not synchronize or shows incorrect time. | Poor DCF77 signal reception. | Relocate the clock to a position with better signal reception (e.g., near a window, away from electronics). Initiate manual synchronization as described in Section 6.2. |
| LCD display shows incorrect date/day. | Synchronization error or manual setting required. | Perform a manual time and language setting as described in Section 6.2. Ensure the clock is left undisturbed during synchronization. |
9. Speċifikazzjonijiet
- Ditta: Renkforce
- Mudell: HD-WRCL135 (Item model number: 1344640)
- Kulur: Iswed
- Tip ta' wiri: Analog with LCD
- Karatteristika Speċjali: Radio reception (DCF-77), Manual time setting
- Dimensjonijiet tal-Prodott: 12.6"W x 1.77"H (32 cm diameter)
- Sors tal-Enerġija: Battery-operated (Batteries not included)
- Tip ta' Kamra: Kamra tas-sodda, Uffiċċju tad-Dar, Kamra tal-Ħajja
- Forma: Round
- Użu fuq ġewwa/barra: Ġewwa
- Materjal: Plastik
- Tip ta 'Immuntar: Mount Wall
- Piż tal-oġġett: 896 gramma (1.98 libbra)
- Arloġġ ta 'allarm: Nru
10. Garanzija u Appoġġ
This product is covered by a 1-year EU spare part availability duration from the date of purchase. For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty purposes.
