Excelvan EHD02 Mini Portable LED Projector User Manual

1. Informazzjoni Importanti dwar is-Sigurtà

• Ventilazzjoni: Ensure adequate ventilation around the projector. Do not block ventilation openings. Overheating can cause damage.
• Provvista tal-Enerġija: Use only the specified power adapter. Disconnect power during thunderstorms or when unused for long periods.
• Umdità: Do not expose the projector to rain, moisture, or liquids.
• Tindif: Clean the projector with a soft, dry cloth. Avoid abrasive cleaners.
• Kura tal-Lenti: Handle the lens with care. Clean gently with a lens cleaning cloth.
• Pjazzament: Place the projector on a stable, level surface. Avoid direct sunlight or heat sources.
• Protezzjoni tal-għajnejn: Tħarisx direttament fil-lenti tal-proġettazzjoni meta tkun qed taħdem.amp hija mixgħula.

2. Prodott Aktarview

2.1. Projector Dimensions

The Excelvan EHD02 projector has compact dimensions, making it portable. The approximate dimensions are 152mm (width) x 220mm (depth) x 76mm (height).

Figure 1: Excelvan EHD02 Mini Projector with labeled dimensions.

2.2. Projector Components and Interfaces

Familiarize yourself with the various ports and controls on your projector for proper setup and operation.

Figure 2: Top controls and rear panel interfaces of the Excelvan EHD02 Projector.

• Top Controls: OK button, Up/Down/Left/Right navigation, Back, Menu, Power.
• Rear Interfaces: VGA port, USB port, Power plug, AV input, 3.5mm Audio port, IR receiver, HDMI port, Keystone adjustment, SD Card slot, TV antenna input.

3. Setup

3.1 Tqegħid

Position the projector on a flat, stable surface. The projection distance determines the image size. For optimal viewing, ensure the projector is centered with the screen or projection surface.

• Distanza ta' Projezzjoni: 1.2 to 3.8 meters (approximately 3.9 to 12.5 feet).
• Daqs tal-Immaġni: 37 to 130 inches (diagonal).
• Metodi ta' Projezzjoni: Jappoġġja l-projezzjoni ta 'quddiem, ta' wara u tas-saqaf.

3.2. Konnessjoni tal-Enerġija

1. Qabbad il-korda tal-enerġija mad-dħul tal-enerġija tal-proġettazzjoni.
2. Ipplaggja t-tarf l-ieħor tal-korda tal-enerġija f'sokit elettriku adattat.
3. Id-dawl tal-indikatur tal-qawwa se jixgħel.

Figure 3: Power cord and remote control for the projector.

3.3. Konnessjoni tas-Sorsi tal-Input

Il-proġekter jappoġġja sorsi ta' input multipli:

• HDMI: Connect to devices like laptops, Blu-ray players, or gaming consoles using an HDMI cable.
• USB: Daħħal flash drive tal-USB biex tilgħab il-midja files direttament.
• Karta SD: Insert an SD card to play media files.
• TA’: Use the provided AV cable to connect to older devices with composite video output.
• VGA: Connect to computers using a VGA cable.
• TV: Connect a TV antenna for analog TV reception.
• Awdjo 3.5mm: Qabbad kelliema jew headphones esterni.

3.4. Korrezzjoni tal-Fokus u l-Keystone

• Aġġustament tal-Focus: Dawwar iċ-ċirku tal-fokus fuq il-lenti tal-proġettazzjoni sakemm l-immaġni tidher qawwija u ċara.
• Korrezzjoni Keystone: If the projected image appears trapezoidal (wider at the top or bottom), use the keystone adjustment dial (typically on the side or rear) to correct the image shape. The projector supports ±12° vertical manual keystone correction.

4. Istruzzjonijiet Operattivi

4.1. Tixgħil / Mitfi

• Qawwa Mixgħul: Agħfas il-buttuna tal-Enerġija fuq il-proġettazzjoni jew fuq il-kontroll remot.
• Itfi: Press the Power button again. The projector will go into standby mode.

4.2. Menu Navigation and Input Selection

• Use the navigation buttons (Up, Down, Left, Right) and the OK button on the projector or remote to navigate through the on-screen menu.
• Press the "Input" or "Source" button (if available on remote, or navigate through menu) to select your desired input source (HDMI, USB, SD, AV, VGA, TV).

4.3. Konnessjoni ta 'Smartphone

Connecting smartphones requires specific cables:

• iPhone/iPad: Requires an original Apple composite AV cable.
• Telefon Android: Requires an MHL cable, and the phone must support MHL (Mobile High-Definition Link).

Figura 4: Eżample of smartphone connection for content projection.

4.4. 3D Playback

The Excelvan EHD02 projector supports red-blue 3D content only. To view Kontenut 3D:

1. Obtain red-blue 3D source content.
2. Use red-blue 3D glasses for viewing.

5. Manutenzjoni

• Tindif tal-Lenti: Use a soft, lint-free cloth specifically designed for optical lenses to gently wipe the projector lens. Avoid touching the lens with bare hands.
• Tneħħija tat-Trab: Periodically clean the projector's exterior with a soft, dry cloth. Ensure ventilation openings are free from dust and obstructions to prevent overheating.
• Ħażna: Meta ma tkunx qed tużah għal perjodi twal, aħżen il-proġettur f'post frisk u niexef, protett mit-trab.

6 Issolvi l-problemi

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

The Excelvan EHD02 Mini Portable LED Projector comes with a garanzija ta 'sena mid-data tax-xiri.

For technical support, warranty claims, or further assistance, please contact your retailer or the Excelvan customer service department. Please have your model number (EHD02) and purchase information ready when contacting support.