TRAULSEN Coil Temperature Sensor (74", BLUE)

1. Prodott Aktarview

The TRAULSEN Coil Temperature Sensor (74", BLUE) 337-60406-02 is a high-quality replacement part designed for precise temperature measurement in various industrial applications, particularly within Traulsen refrigeration units. This sensor features a 74-inch (1880 mm) overall length blue wire with an outer diameter of 1/8 inch (3 mm). It includes a 3/4-inch black sensor end and connects via a 2-pin connector. It is a crucial component for maintaining optimal operating temperatures within compatible Traulsen models.

This image shows the complete TRAULSEN Coil Temperature Sensor, featuring its 74-inch blue wire, the white 2-pin connector at one end, and the black 3/4-inch sensor tip at the other.

2. Speċifikazzjonijiet Tekniċi

Detailed specifications for the TRAULSEN Coil Temperature Sensor 337-60406-02 are provided below:

A technical drawing illustrating the 74-inch overall length of the TRAULSEN Coil Temperature Sensor, with a small detail showing the 1/8-inch wire diameter.

3. Installazzjoni u Setup

This temperature sensor is designed for specific Traulsen refrigeration models. Installation typically involves replacing an existing sensor. Follow these steps carefully:

1. Is-Sigurtà l-Ewwel: Before beginning any installation or replacement, ensure the equipment is completely powered off and disconnected from its power source to prevent electrical shock.
2. Sib is-Sensor Eżistenti: Identify the faulty or old temperature sensor within your Traulsen unit.
3. Disconnect Old Sensor: Carefully disconnect the 2-pin connector of the old sensor. Note the routing of the wire.
4. Neħħi s-Sensor il-Qadim: Detach the old sensor from its mounting location.
5. Installa Sensor Ġdid: Position the new TRAULSEN 337-60406-02 sensor in the same location as the old one. Ensure the 3/4-inch black sensor end is properly situated for accurate temperature readings.
6. Connect New Sensor: Connect the new sensor's 2-pin connector to the corresponding receptacle in the unit. Ensure a firm and secure connection.
7. Wajer tar-Rotta: Route the 74-inch blue wire carefully to avoid pinching or damage.
8. Funzjonalità tat-Test: Once installed, restore power to the unit and monitor its operation to confirm the new sensor is providing accurate temperature readings.

Nota: While this sensor is a direct replacement for many applications, always verify the connector type and specifications against your unit's requirements. Some older units may have different connector styles, requiring adaptation.

A dettaljata view of the 3/4-inch black sensor end, which is the temperature sensing component.

A close-up image of the white 2-pin connector, showing the two wires leading into it.

4. Linji Gwida ta' Operazzjoni

The TRAULSEN Coil Temperature Sensor operates passively by detecting the temperature of its environment and transmitting this data to the refrigeration unit's control system. It does not require direct user interaction for its function. Once properly installed, the sensor continuously monitors the coil temperature, allowing the unit to regulate its cooling cycles efficiently. Ensure the sensor tip remains free from obstructions or excessive ice buildup for optimal performance.

5. Kura u Manutenzjoni

To ensure the longevity and accuracy of your TRAULSEN Coil Temperature Sensor, consider the following maintenance guidelines:

• Spezzjoni regolari: Periodically inspect the sensor and its wiring for any signs of physical damage, wear, or corrosion.
• Indafa: Keep the sensor tip clean and free from dust, debris, or ice accumulation, which can affect its accuracy. Use a soft, damp cloth for cleaning; avoid abrasive materials or harsh chemicals.
• Konnessjonijiet sikuri: Verify that the 2-pin connector remains securely attached and that the wire is not pinched or strained.
• Evita Kundizzjonijiet Estremi: While designed for refrigeration environments, avoid exposing the sensor to temperatures beyond its operational range or to direct physical impact.

6. Issolvi l-problemi ta' Kwistjonijiet Komuni

If your refrigeration unit is displaying incorrect temperature readings or fault codes related to the coil temperature, the sensor may be a contributing factor. Consider the following troubleshooting steps:

• Qari mhux eżatt: If the unit displays temperatures that seem incorrect, first check the sensor's physical placement and ensure it is not obstructed or covered. Verify the connector is fully seated.
• Sensor Not Detected/Fault Code: If the unit indicates a sensor error, check the integrity of the wiring from the sensor to the control board. Look for cuts, breaks, or loose connections.
• Kwistjonijiet Intermittenti: Intermittent problems can sometimes be caused by a faulty connection or a sensor that is beginning to fail.

Rakkomandazzjoni: If troubleshooting steps do not resolve the issue, and the sensor is suspected to be faulty, replacement is typically the next step. Ensure the replacement sensor matches the specifications and connector type of the original part.

7. Garanzija u Appoġġ għall-Klijent

This TRAULSEN Coil Temperature Sensor is backed by a warranty provided by the seller, Wholesale Sensors, typically ranging from 12 to 24 months from the date of purchase. This warranty covers manufacturing defects and ensures product quality.

For warranty claims, technical assistance, or product inquiries, please contact the seller directly through your purchase platform. Keep your proof of purchase for any warranty-related requests. For general information about Traulsen products, you may visit the official Traulsen websit.

An infographic highlighting the benefits of Wholesale Sensors products, including high-quality OEM replacements, cost-effectiveness, design by American engineers, and being a US-based manufacturing and distribution company offering 12-24 month warranties.