Manwal tal-Utent tal-Arloġġ Click Clock GK18TL tal-Gingko Gravity Cube

Introduzzjoni

The Gingko Gravity Cube Click Clock is an innovative alarm clock designed for ease of use and modern aesthetics. This device features a sound-activated LED display, a gravity-controlled alarm function, and a touch-sensitive snooze. This manual provides detailed instructions for setting up, operating, and maintaining your Gravity Cube Click Clock.

Figura 1: Quddiem view of the Gingko Gravity Cube Click Clock.

Setup

Before using your Gravity Cube Click Clock, please follow these steps for initial setup.

1. It-Tħaddim tal-Apparat

The clock can be powered via USB or batteries.

• Qawwa tal-USB: Connect the provided USB cable to the DC5V port on the back of the clock and plug the other end into a USB power adapter (not always included) or a powered USB port.
• Qawwa tal-batterija: Open the battery compartment on the back of the clock. Insert 1 Lithium Polymer battery (required, not always included) according to the polarity markings. Ensure the battery is securely placed.

Figure 2: Back panel with controls and power input.

2. Initial Settings (Time, Date, Temperature)

Upon first power-on, the display will activate. You will need to set the current time and date.

1. Agħfas il- SET button on the back of the clock to enter setting mode.
2. Uża l- + u - buttons to adjust the values (e.g., hour, minute, year, month, day).
3. Agħfas SET again to confirm each setting and move to the next parameter.
4. Continue until all settings (time, date, temperature unit if applicable) are configured.

Istruzzjonijiet Operattivi

1. Display Activation

The LED display is sound-activated. It will automatically switch off when the room is quiet to conserve power. To activate the display:

• Make a sound (e.g., clap your hands).
• Gently tap the bedside table or surface the clock is resting on.

The display will show time, date, and temperature alternately.

Figure 3: Clock displaying time.

2. Issettjar tal-Allarm

The Gravity Cube features a gravity-controlled alarm.

1. Agħfas il- Ikona tal-allarm button on the back of the clock to enter alarm setting mode.
2. Uża l- + u - buttuni biex tissettja l-ħin tal-allarm mixtieq.
3. Agħfas il- Ikona tal-allarm buttuna għal darb'oħra biex tikkonferma.
4. To activate the alarm, ensure the side of the clock with the alarm icon is facing upwards. The display will show an alarm indicator.
5. To deactivate the alarm, turn the clock over so a different side is facing upwards. The alarm indicator will disappear.

3. Funzjoni Snooze

Meta jdoqq l-allarm, tista' tattiva l-funzjoni snooze:

• Gently touch the top surface of the clock (where "SNOOZE" is indicated). The alarm will pause for a short period (typically 5-9 minutes) and then sound again.

4. Voice/Sound Control Sensitivity (V/S)

Il- V/S button on the back panel may allow adjustment of the sound activation sensitivity for the display. Refer to the specific product packaging or a more detailed manual for precise control over this feature.

Manutenzjoni

To ensure the longevity and proper functioning of your Gingko Gravity Cube Click Clock, follow these maintenance guidelines:

• Tindif: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the rubberized finish.
• Sostituzzjoni tal-batterija: If using battery power, replace the Lithium Polymer battery when the display dims or functions become erratic. Ensure correct polarity when inserting new batteries.
• Ħażna: Jekk taħżen l-arloġġ għal perjodu estiż, neħħi l-batteriji biex tevita t-tnixxija.

Issolvi l-problemi

If you encounter issues with your Gravity Cube Click Clock, refer to the following common problems and solutions:

• Display Not Activating:
  • Check power source: Ensure USB cable is securely connected or batteries are correctly inserted and not depleted.
  • Make a louder sound or tap the surface more firmly to activate the display.
• Allarm ma Ddoqq:
  • Verify the alarm is set correctly (refer to "Setting the Alarm" section).
  • Ensure the side with the alarm icon is facing upwards to activate the alarm.
  • Check battery level if operating on batteries.
• Alarm Cannot Be Turned Off:
  • Turn the clock over to a different side to deactivate the alarm.
  • If the issue persists, temporarily remove batteries or disconnect USB power to reset the device.
• Ħin/Data Mhux Korretti:
  • Re-enter the setting mode using the SET button and adjust the time and date.
  • Ensure batteries are not low, as this can sometimes affect timekeeping.

Speċifikazzjonijiet

Garanzija u Appoġġ

Specific warranty information for the Gingko Gravity Cube Click Clock GK18TL is typically provided with the product packaging or available on the manufacturer's official website. Please refer to these sources for details regarding warranty coverage and terms.

For technical support or further assistance, please contact Gingko customer service through their official websit jew l-informazzjoni ta’ kuntatt ipprovduta max-xiri tiegħek.