1. Introduzzjoni
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Figura 1: Quddiem view of the Legrand LEG97605 Dimmer Switch.
2. Informazzjoni Importanti dwar is-Sigurtà
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jew skont il-kodiċijiet elettriċi lokali.
- Taqbiżx il-wat massimutage klassifikazzjoni ta '300W.
- Kun żgur li l-konnessjonijiet kollha tal-wajers huma sikuri u iżolati sew.
- Dan l-apparat huwa ddisinjat għall-użu fuq ġewwa biss.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Manwal ta 'Istruzzjoni (Dan id-dokument)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Istruzzjonijiet ta 'installazzjoni
Follow these steps carefully to install your dimmer switch:
- Itfi l-Enerġija: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage tester qabel ma tipproċedi.
- Ipprepara l-Post tal-Immuntar: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Wiring:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Immuntar: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' ixgħel il-kurrent mis-circuit breaker.
Figura 3: Fuq view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- Biex Tixgħel/Titfi: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- Biex Tnaqqas/Tdawwal: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Figura 4: Angolat view highlighting the rotary control knob.
6. Manutenzjoni
Your Legrand dimmer switch requires minimal maintenance.
- Tindif: To clean the surface of the dimmer, wipe with a soft, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
- Spezzjoni: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7 Issolvi l-problemi
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power to the switch; incorrect wiring. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Id-dawl jitteptep jew jivvibra. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.
8. Speċifikazzjonijiet Tekniċi
| Karatteristika | Dettall |
|---|---|
| Brand | Legrand |
| Numru tal-Mudell | LEG97605 |
| Mod ta' Operazzjoni | ON-OFF |
| Klassifikazzjoni kurrenti | 10 Amps |
| Wattage | 300 Watts |
| Tip ta' Kuntatt | Normalment Miftuħ |
| Tip ta' Konnettur | Viti |
| Terminal | Invita |
| Tip ta 'Ċirkwit | 1-mod |
| Tip ta' Attwatur | Jdur |
| Tip ta' Kontrollur | Imbotta Buttuna |
| Kuntatt Materjal | Ram |
| Klassifikazzjoni tal-Protezzjoni Internazzjonali | IP54 |
| Tip ta 'Immuntar | Immonta fil-wiċċ |
| Kulur | Abjad |
| Piż tal-oġġett | 2.46 uqija |
| Data L-Ewwel Disponibbli | 25 ta’ Settembru, 2015 |
9. Garanzija u Appoġġ għall-Klijent
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webis-sit jew l-imballaġġ tal-prodott għad-dettalji ta' kuntatt l-aktar riċenti.
Uffiċjal ta' Legrand Websit: www.legrand.us
