Manwal tal-Utent tas-Swiċċ Push tal-Banju li Jikkomunika SDC CB401-AU

Prodott Overview

The SDC CB401-AU is a communicating bath push switch designed for secure access control in shared bathroom environments. This stainless steel switch is compatible with Emlock, Selectric, Electra, and Hi-Tower locking systems. It ensures that both doors of a communicating bathroom must be closed for the lock to engage, enhancing privacy and security. A visual indicator light confirms the locked status.

SDC CB401-AU Communicating Bath Push Switch with red button and text 'BATHROOM LOCK BOTH DOORS MUST BE CLOSED TO LOCK PUSH TO LOCK OR UNLOCK LIGHT ON DOOR LOCKED'

Figure 1: SDC CB401-AU Communicating Bath Push Switch. This image displays the front of the stainless steel switch, featuring a prominent red square push button. Above the button, text reads "BATHROOM LOCK" and "BOTH DOORS MUST BE CLOSED TO LOCK". Below the button, it states "PUSH TO LOCK OR UNLOCK" and "LIGHT ON DOOR LOCKED". The SDC logo is visible at the top.

Setup u Installazzjoni

This section provides general guidelines for the installation of the CB401-AU switch. Professional installation is recommended to ensure proper functionality and compliance with local electrical codes.

Lista ta' Kontroll ta' Qabel l-Installazzjoni:

Verify compatibility with your existing Emlock, Selectric, Electra, or Hi-Tower locking system.
Ensure all necessary wiring and power sources are available and meet specifications.
Confirm the mounting location inside the shared bathroom is suitable and accessible.
Gather required tools (e.g., screwdriver, wire strippers, drill).

Istruzzjonijiet għall-Immuntar:

Itfi l-enerġija fiż-żona tal-installazzjoni fis-circuit breaker.
Carefully remove the existing switch plate, if applicable.
Connect the wiring from the locking system to the appropriate terminals on the CB401-AU switch. Refer to the wiring diagram provided with your specific locking system for correct connections.
Mount the switch securely to the wall box using the provided screws.
Waħħal il-wiċċ tal-wiċċ.
Restore power and test the functionality.

Importanti: This switch requires both communicating bathroom doors to be closed for the lock to engage. Ensure the associated door sensors and wiring are correctly installed and functioning.

Istruzzjonijiet Operattivi

The SDC CB401-AU switch provides simple operation for securing a shared bathroom.

Locking the Bathroom:

Ensure both communicating bathroom doors are fully closed.
Press the red push button on the CB401-AU switch.
The integrated light on the CB401-AU switch will illuminate, indicating that the doors are locked.
Verify that both doors are securely locked from the outside.

Unlocking the Bathroom:

Press the red push button on the CB401-AU switch again.
The integrated light will turn off, indicating that the doors are unlocked.
Verify that both doors can be opened.

Nota: If the light does not illuminate when attempting to lock, ensure both doors are completely closed and the system is receiving power.

Manutenzjoni

The SDC CB401-AU switch is designed for durability and requires minimal maintenance.

Tindif: Imsaħ il-wiċċ tal-istainless steel b'ċarruta ratba u damp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti interni.
Spezzjoni: Periodically check the switch for any signs of physical damage, loose connections, or unusual operation.
Test tal-Funzjonalità: Regularly test the locking and unlocking function to ensure proper operation.

Do not attempt to disassemble the switch. Refer all internal repairs to qualified service personnel.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
Switch does not lock doors.	Doors not fully closed. L-ebda qawwa għas-sistema. Ħruġ tal-wajers. Faulty lock mechanism.	Ensure both doors are completely closed. Iċċekkja s-circuit breaker u l-provvista tal-enerġija. Verify all wiring connections are secure (consult professional). Inspect the associated Emlock/bolt lock for proper function.
Light does not illuminate when locked.	Light bulb failure (if applicable). Wiring issue to the indicator light. System not fully engaged.	Contact SDC support for replacement or service. Check wiring connections (consult professional). Ensure doors are fully closed and lock mechanism is engaged.
Is-swiċċ iħossu maħlul jew jitħarrek.	Il-viti tal-immuntar huma maħlula. Installazzjoni ħażina.	Gently tighten mounting screws. Do not overtighten. If issue persists, professional re-installation may be required.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact SDC customer support.

Speċifikazzjonijiet

Karatteristika	Dettall
Numru tal-Mudell	CB401-AU
Dimensjonijiet tal-Prodott	2 x 3 x 5 pulzieri
Piż tal-oġġett	4.8 uqija
Materjal	Stainless Steel
Mod ta' Operazzjoni	ON-NONE-OFF
Tip ta 'Immuntar	Mount Wall
Tip ta' Attwatur	Imbotta Buttuna
Klassifikazzjoni tal-Protezzjoni Internazzjonali	IP00
Metodu ta' Kontroll	App (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Protokoll tal-Konnettività	Wi-Fi (Note: This specification from source data may refer to the overall system, not the switch itself. The switch is a physical push button.)
Sistemi Kompatibbli	Emlock, Selectric, Electra, Hi-Tower

Nota: L-ispeċifikazzjonijiet huma soġġetti għal bidla mingħajr avviż.

Garanzija u Appoġġ

Informazzjoni dwar il-garanzija:

Specific warranty details for the SDC CB401-AU switch are typically provided with the product packaging or can be obtained directly from SDC. Generally, SDC products come with a limited warranty covering defects in materials and workmanship under normal use.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal pretensjonijiet ta' garanzija.

Appoġġ għall-Klijent:

For technical assistance, troubleshooting, or warranty inquiries, please contact SDC customer support. Contact information can usually be found on the SDC official webis-sit jew fid-dokumentazzjoni tal-prodott.

When contacting support, please have your product model number (CB401-AU) and purchase date available.

	Servizzi ta' Disinn ta' Sistemi Inġinerizzati mill-SDC għall-Kontroll tal-Aċċess u l-Ħruġ Is-Servizzi tad-Disinn tas-Sistemi Inġinerizzati tal-SDC joffru soluzzjonijiet komprensivi għall-kontroll tal-aċċess u l-ħruġ ta' diversi bibien, li jinkludu kontrolluri tas-Serje UR, EMLocks, strajkijiet elettriċi, u dijagrammi dettaljati tal-wajers tas-sistema għal diversi applikazzjonijiet.
	Istruzzjonijiet għall-Installazzjoni tas-Swiċċ tal-Kamra tal-Banju li Jikkomunika s-Serje SDC CB Istruzzjonijiet dettaljati għall-installazzjoni għas-Swiċċijiet tal-Kamra tal-Banju li Jikkomunikaw tas-Serje SDC CB, inklużi l-mudelli CB400-A, CB400-B, u CB700. Ikopri l-ispeċifikazzjonijiet, il-wajers, u l-proċeduri tal-assemblaġġ għall-kontroll tal-aċċess tal-bibien.
	Istruzzjonijiet għall-Installazzjoni ta' SDC 352 Narrow Line EMLock Gwida komprensiva għall-installazzjoni għas-Serratura Elettromanjetika b'Linja Dejqa SDC 352. Tgħallem kif tinstalla u tqabbad sew dan il-ħardwer tal-kontroll tal-aċċess għal sistemi ta' 12VDC jew 24VDC.
	Gwida għall-Installazzjoni tas-Swiċċ tal-Pjattaforma Push tal-ADA HDPE SDC 482A6RPH/484A6RPH Istruzzjonijiet ta' installazzjoni għas-Swiċċijiet tal-Pjanċa Tonda Push SDC 482A6RPH u 484A6RPH HDPE. Dawn il-buttuni tal-ftuħ tal-bibien konformi mal-ADA għandhom wiċċ blu b'test abjad 'PUSH TO OPEN' u huma ddisinjati għal installazzjoni faċli ma' diversi kaxxi elettriċi.
	SDC 432KLDUR Lockdown Push Switch Installation Instructions Detailed installation instructions for the SDC 432KLDUR Lockdown Push Switch, covering operation, specifications, wiring diagrams, and UL 294 performance ratings. Includes contact information for SDC Security Door Controls.
	Istruzzjonijiet għall-Installazzjoni tas-Swiċċ Push tas-Serje SDC 410/420 Gwida għall-installazzjoni għas-Swiċċijiet Push tas-Serje SDC 410/420, li tiddeskrivi l-ispeċifikazzjonijiet elettriċi, id-dijagrammi tal-wajers, u l-karatteristiċi tal-prodott għal sistemi ta' kontroll tal-aċċess siguri.

SDC CB401-AU