SKYRC FBA_JGH0773798512963OL

Manwal tal-Istruzzjonijiet tal-Adapter tal-Provvista tal-Enerġija SKYRC 15V 4A 60W

Model: FBA_JGH0773798512963OL

1. Introduzzjoni

This manual provides essential information for the safe and efficient use of your SKYRC 15V 4A 60W Power Supply Adapter. This power supply is designed to provide stable DC power for compatible devices, such as the SKYRC IMAX B6 and Mini B6 Balance Chargers. Please read this manual thoroughly before use and retain it for future reference.

2. Istruzzjonijiet tas-Sigurtà

  • This power supply is intended for indoor use only. Do not expose it to rain, moisture, or extreme temperatures.
  • Tiżgura l-input voltage matches the specifications on the adapter label before connecting to a power outlet.
  • Do not operate the power supply if the cables are damaged or if the unit shows any signs of malfunction.
  • Keep the power supply away from flammable materials and ensure adequate ventilation during operation.
  • Disconnect the power supply from the wall outlet when not in use or during electrical storms.
  • Do not attempt to open or modify the power supply. Refer all servicing to qualified personnel.

3. Prodott Aktarview

Familiarize yourself with the components of your SKYRC Power Supply Adapter.

SKYRC 15V 4A 60W Power Supply Adapter, top view with AC input and DC output cables.

Figura 1: Quddiem view of the SKYRC 15V 4A 60W Power Supply Adapter, showing the AC input port and the attached DC output cable.

Label on the SKYRC 15V 4A 60W Power Supply Adapter showing input/output specifications and safety certifications.

Figura 2: Dettaljat view of the product label, indicating input (100-240V~50/60Hz 1.5A) and output (15V===4A) specifications, along with safety warnings and certifications (FC, CE).

4. Setup u Konnessjoni

Follow these steps to properly set up your power supply:

  1. Ippakkja: Carefully remove the power supply and all accessories from the packaging.
  2. Qabbad il-Korda tal-Enerġija AC: Insert the AC power cord into the input port of the power supply. Ensure it is firmly seated.
  3. Qabbad il-Ħruġ DC: Connect the DC output plug of the power supply to the DC input port of your compatible device, such as a SKYRC IMAX B6 or Mini B6 Balance Charger.
  4. Ipplaggja mal-Ħut tal-Ħajt: Plug the AC power cord into a suitable wall outlet. The power supply is now ready for use.
SKYRC 15V 4A 60W Power Supply Adapter with its AC power cord.

Figure 3: The SKYRC Power Supply Adapter shown with its detachable AC power cord, ready for connection.

5. Istruzzjonijiet Operattivi

Once connected, the power supply is ready to deliver power. Ensure your connected device (e.g., balance charger) is compatible with the output specifications of this power supply.

  • Ivverifika l-Kompatibbiltà: Always confirm that your device's power requirements (voltage u amperage) match the output of this power supply (15V, 4A).
  • Apparat ta' Qawwa: Turn on your connected device (e.g., balance charger) according to its own instruction manual. The power supply will provide the necessary power.
  • Tissorvelja l-Operazzjoni: Observe your device during operation to ensure stable power delivery.
  • Skonnettja Meta Ma Tkunx Qed Tuża: For safety and energy conservation, disconnect the power supply from the wall outlet when not in use for extended periods.
SKYRC 15V 4A 60W Power Supply Adapter connected to a SKYRC IMAX B6 Mini Balance Charger.

Figure 4: Illustration showing the SKYRC Power Supply Adapter connected to a compatible SKYRC IMAX B6 Mini Balance Charger, demonstrating typical usage.

6. Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni affidabbli tal-provvista tal-enerġija tiegħek:

  • Tindif: Use a soft, dry cloth to clean the exterior of the power supply. Do not use liquid cleaners or solvents.
  • Ambjent: Keep the power supply in a clean, dry environment, free from dust and moisture. Avoid extreme temperatures.
  • Spezzjoni tal-Cable: Regularly inspect the AC and DC cables for any signs of damage, fraying, or exposed wires. Replace immediately if damage is found.
  • Ħażna: When not in use, store the power supply in a cool, dry place.

7 Issolvi l-problemi

If you encounter issues with your power supply, refer to the following table for common problems and solutions:

ĦruġKawża PossibbliSoluzzjoni
Ebda output ta 'enerġijaLoose connections, faulty outlet, damaged cable.Check all cable connections. Test the wall outlet with another device. Inspect cables for damage.
Power supply feels hotNormal operation, insufficient ventilation, excessive load.Ensure adequate airflow around the unit. Verify the connected device's power draw does not exceed 60W. If excessively hot, disconnect immediately.
Connected device not functioningIncompatible device, device malfunction, power supply issue.Confirm device compatibility with 15V 4A output. Test the device with another known-good power source if available. If the power supply is suspected, contact support.

8. Speċifikazzjonijiet Tekniċi

SpeċifikazzjoniValur
BrandEstensjoni SKYRC
Numru tal-MudellFBA_JGH0773798512963OL
Input Voltage100-240V~50/60Hz 1.5A
Ħruġ Voltage15 Volts
Kurrent tal-Ħruġ4 Amps
Qawwa tal-Ħruġ60 Watts
Piż tal-oġġett11.2 uqija (0.32 Kilogrammi)
Dimensjonijiet tal-Pakkett6 x 3.5 x 3.2 pulzieri

9. Garanzija u Appoġġ

For warranty information or technical support regarding your SKYRC 15V 4A 60W Power Supply Adapter, please refer to the official SKYRC website or contact your authorized dealer. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.

Dokumenti Relatati - FBA_JGH0773798512963OL

Preview SKYRC B6AC V2 Bedienungsanleitung: Professionelles Ladegerät/Entladegerät
Die SKYRC B6AC V2 Bedienungsanleitung bietet detaillierte Informationen zu diesem professionellen AC/DC Dual Power Balance Ladegerät und Entladegerät, inklużi Funktionen, Sicherheitshinweisen u Betriebsanleitungen.
Preview SKYRC IMAX B6 V2 Professional Balance Charger/Discharger Instruction Manual
Detailed instruction manual for the SKYRC IMAX B6 V2 Professional Balance Charger/Discharger, covering features, safety, operation, and specifications for various battery types including LiPo, LiFe, Lilon, LiHV, NiMH, NiCd, Pb, and DJI batteries.
Preview Manwal tal-Istruzzjonijiet SKYRC B6AC V2: Ċarġer/Ċarġer tal-Bilanċ tal-Qawwa Doppja AC/DC
Manwal ta' struzzjonijiet komprensiv għall-SKYRC B6AC V2 AC/DC Dual Power Professional Balance Charger/Discharger, li jkopri l-karatteristiċi, it-tħaddim, is-sigurtà, l-ispeċifikazzjonijiet, u l-garanzija. Tgħallem kif tuża ċ-ċarġer tiegħek b'mod effettiv u sikur.
Preview SKYRC IMAX B6AC V2 AC/DC Dual Power Professional Balance Charger/Discharger Instruction Manual
This instruction manual provides comprehensive details on the SKYRC IMAX B6AC V2 AC/DC Dual Power Professional Balance Charger/Discharger, covering its features, operation, safety guidelines, specifications, and troubleshooting.
Preview SKYRC iMAX B6 V2: Professional Balance Charger/Discharger Instruction Manual
The SKYRC iMAX B6 V2 is a high-performance, microprocessor-controlled balance charger/discharger designed for various battery types including LiPo, LiFe, Li-Ion, LiHV, NiMH, NiCd, and Pb. It offers 60W of power, multiple charging modes, and advanced features for hobbyists and RC enthusiasts.
Preview SKYRC iMAX B6 mini Professional Balance Charger/Discharger Instruction Manual
Comprehensive instruction manual for the SKYRC iMAX B6 mini, a high-performance microprocessor-controlled balance charger/discharger. Learn about its features, operation, safety precautions, battery compatibility, and specifications.