1. Prodott Aktarview
The Utilitech Plug-in Touch Control Dimmer is designed to convert any lamp b'sokit tal-metall f'l ikkontrollat bil-messamp. This device provides three distinct levels of illumination, allowing users to easily adjust lighting from a subtle night light to full brightness. Operation is simplified by merely touching the lamp's metal surface to cycle through light settings or to turn the lamp on and off. It is compatible with incandescent bulbs up to 200 watts and is engineered for straightforward installation.
Image 1.1: The Utilitech Plug-in Touch Control Dimmer. This compact white unit plugs directly into a wall outlet and features a receptacle for the lamp's power cord.
2. Informazzjoni dwar is-Sigurtà
- Tiżgura l-lamp control is used with incandescent bulbs only, up to a maximum of 200 watts. Do not exceed the specified wattage.
- This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Dejjem aqla l-lamp from the control unit and the control unit from the wall outlet before performing any maintenance or changing bulbs.
- Tippruvax tiżżarma jew timmodifika l-unità. Irreferi kull servizz lil persunal kwalifikat.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Tiżgura l-lamp you intend to convert has a metal socket for proper touch functionality.
3. Kontenut tal-Pakkett
- 1 x Utilitech White Touch Lamp Unità ta' Kontroll
4. Setup u Installazzjoni
- Ipprepara l-Lamp: Żgura l tiegħekamp has a metal socket. Unplug the lamp mis-sors tal-enerġija tiegħu.
- Connect the Control Unit: Plug the Utilitech Touch Lamp Control unit into a standard 120V AC wall outlet.
- Qabbad il-Lamp: Ipplaggja l tiegħekamp's power cord into the receptacle on the Utilitech Touch Lamp Unità ta' kontroll.
- Ivverifika t-Tip ta' Bozza: Ikkonferma li l-lamp contains an incandescent bulb, not exceeding 200 watts. LED or CFL bulbs may not function correctly or may cause damage.
- Test Inizjali: Once connected, touch any metal part of the lamp's base or body. The lamp should turn on to its lowest setting.
Nota Importanti: For optimal performance, ensure the lamp's metal components are clean and free of non-conductive coatings or paint where touch contact is intended.
5. Istruzzjonijiet Operattivi
The Utilitech Touch Lamp Control provides three levels of brightness and an off state, cycled by touching the lamp's metal surface.
- To Turn On (Low Brightness): Touch any metal part of the lamp. Il-lamp will illuminate at its lowest brightness setting (night light).
- To Increase Brightness (Medium): Mess il-lamp again. The brightness will increase to a medium level.
- To Increase Brightness (High): Mess il-lamp a third time. The brightness will increase to its highest level (full brightness).
- Biex Tintefa: Mess il-lamp a fourth time. The lamp se jintefa.
The cycle repeats with each subsequent touch: Off → Low → Medium → High → Off.
6. Manutenzjoni
- Tindif: Disconnect the unit from the power outlet before cleaning. Wipe the control unit with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Sostituzzjoni tal-bozza: Dejjem aqla l-lamp from the control unit and the control unit from the wall outlet before replacing a light bulb. Ensure the replacement bulb is an incandescent type and does not exceed 200 watts.
- Ħażna: If storing the unit for an extended period, unplug it from the wall outlet and store it in a cool, dry place.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Lamp does not turn on or respond to touch. |
|
|
| Lamp teptip jew titbaxxa b'mod inkonsistenti. |
|
|
| Lamp stays on or off. |
|
|
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Utilitech |
| Numru tal-Mudell | 25991 |
| Kulur | Abjad |
| Metodu ta' Kontroll | Mess |
| Light Source Type Compatibility | Inkandexxenti |
| Wat Massimutage | 200 watt |
| Voltage | 120 Volts |
| Karatteristika Speċjali | Dimmable (3 levels) |
| Użu fuq ġewwa/barra | Ġewwa |
| Tip ta 'Immuntar | Plug-In Mount |
| Piż tal-oġġett | 2.78 uqija |
| Dimensjonijiet tal-Pakkett | 8.66 x 4.92 x 2.6 pulzieri |
9. Garanzija u Appoġġ
For warranty information or technical support, please refer to the product packaging or contact Utilitech customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, please visit the official Utilitech website or contact their customer support line. Contact details are typically provided on the product packaging or within the original sales documentation.
