American Standard Maybrook Universal Washout Urinal Instruction Manual

1. Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your American Standard Maybrook Universal Washout Top Spud Urinal, Model 6581001.020. This high-efficiency urinal is designed for commercial applications, offering water conservation with a flush range of 0.125 GPF to 1.0 GPF. It features a flushing rim and a washout flush action for effective performance.

Figura 1: Quddiem view of the American Standard Maybrook Universal Washout Top Spud Urinal.

2. Setup u Installazzjoni

The American Standard Maybrook Urinal is designed for wall-mounted installation. It includes an integral strainer, a 3/4 inch inlet spud, an outlet spud with a 1-1/2 inch tubing tailpiece, and a wall hanger for secure mounting. A flush valve is required for operation but is not included with the urinal.

Due to the complexities of plumbing and ensuring proper function, professional installation by a qualified plumber is highly recommended. Refer to the dimensional drawing for precise measurements and rough-in requirements.

Figure 2: Technical drawing illustrating the dimensions and spud locations for the American Standard Maybrook Urinal.

3. Istruzzjonijiet Operattivi

This urinal operates with a top spud flush valve (not included). Once the flush valve is installed and connected to the water supply, activate the flush by pressing the flush handle. The urinal's design ensures a powerful washout action with minimal water consumption (0.125 to 1.0 GPF).

For a visual guide on how a typical commercial flush valve operates, you may refer to the video below. Please note that the specific flush valve shown in the video is for illustrative purposes and may differ from the one you install.

4. Manutenzjoni

Regular cleaning of the vitreous china surface is recommended to maintain hygiene and appearance. Use non-abrasive cleaners to prevent damage to the finish.

The flush valve, a separate component, may require periodic maintenance. If the urinal experiences continuous flushing or reduced water flow, check the inlet valve and the diaphragm within the flush mechanism. Debris such as sand can accumulate and affect performance. The inlet valve can often be adjusted or temporarily opened to flush out minor obstructions. Consult the flush valve manufacturer's instructions for detailed maintenance procedures.

Figure 3: The urinal with an installed flush valve, highlighting the components that may require maintenance.

5 Issolvi l-problemi

• Continuous Flushing: This is often caused by debris (e.g., sand, sediment) lodged in the flush valve's diaphragm or inlet valve. Turn off the water supply to the urinal, then carefully inspect and clean the flush valve components according to the flush valve manufacturer's instructions.
• Laħlaħ Dgħajjef: A weak flush can indicate insufficient water pressure, a partially closed inlet valve, or a clogged flush valve diaphragm. Ensure the main water supply valve is fully open and check the flush valve for obstructions.
• No Flush: Verify that the water supply to the urinal is open. If the flush valve is sensor-operated, check its power source (batteries or electrical connection). For manual flush valves, inspect the handle mechanism for damage or disconnections.
• Tnixxijiet: Check all connections for tightness. If leaks persist from the flush valve body, the internal seals or diaphragm may need replacement.

For persistent issues, it is advisable to consult a qualified plumbing professional.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

For detailed warranty information and customer support, please refer to the official American Standard webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.

You can visit the American Standard Store for more products and information: Ħanut Standard Amerikan.