1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of the ClearOne WS800 M586 6-Inch Wireless Gooseneck Microphone. This device is designed for professional audio conferencing environments, offering seamless integration with Dante-enabled systems.
2. Prodott Aktarview
The ClearOne WS800 M586 is a 6-inch wireless gooseneck microphone, part of the WS800 series. It is engineered to interoperate with other Dante devices and is optimized for use with ClearOne CONVERGE Pro and INTERACT Pro products.

Figure 1: ClearOne WS800 M586 6-Inch Wireless Gooseneck Microphone. This image shows the black gooseneck microphone attached to its base unit, featuring the ClearOne logo and a small red indicator light.
2.1 Karatteristiċi ewlenin
- Dante network compatibility for seamless integration.
- Optimized for ClearOne CONVERGE Pro and INTERACT Pro systems.
- Wireless operation for flexible placement.
- 6-inch gooseneck design for precise microphone positioning.
3. Setup
3.1 Disimballaġġ
Neħħi bir-reqqa l-komponenti kollha mill-imballaġġ. Ivverifika li l-oġġetti kollha elenkati fil-karta tal-ippakkjar huma preżenti.
3.2 Identifikazzjoni tal-Komponent
- WS800 M586 Gooseneck Microphone
- Microphone Base Unit
- Adapter tal-Enerġija (jekk applikabbli)
3.3 Konnessjoni Inizjali
- Insert the gooseneck microphone into the designated port on the microphone base unit. Ensure it is securely seated.
- Connect the power adapter to the base unit and then to a power outlet.
- Refer to your Dante network configuration guide for integrating the microphone into your existing audio system.
4. Istruzzjonijiet Operattivi
4.1 Tixgħel/Jitfi
To power on the microphone, ensure the base unit is connected to power. The microphone will automatically power on when the base unit receives power. To power off, disconnect the base unit from the power source.
4.2 Pożizzjonament tal-Mikrofonu
Position the gooseneck microphone approximately 6-12 inches (15-30 cm) from the speaker's mouth for optimal audio capture. Adjust the gooseneck to direct the microphone capsule towards the sound source.
4.3 Funzjoni Mute
If the base unit includes a mute button, press it to toggle the microphone's audio output. An indicator light (often red) typically signifies that the microphone is muted.
5. Manutenzjoni
5.1 Tindif
Use a soft, dry cloth to clean the exterior of the microphone and base unit. Do not use liquid cleaners or solvents, as these may damage the device.
5.2 Ħażna
When not in use for extended periods, store the microphone in a cool, dry place, away from direct sunlight and extreme temperatures.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ebda output awdjo | Microphone not powered; Muted; Incorrect Dante routing | Check power connection; Unmute microphone; Verify Dante network configuration |
| Kwalità fqira tal-awdjo | Incorrect placement; Interference | Adjust microphone position; Check for nearby electronic devices causing interference |
7. Speċifikazzjonijiet
- Mudell: M586
- Numru tal-Parti: 910-6002-065-C
- Tip: Wireless Gooseneck Microphone
- Tul: 6 Pulzier
- Konnettività: Dante Wireless
- Kompatibilità: ClearOne CONVERGE Pro, INTERACT Pro, and other Dante devices
8. Garanzija u Appoġġ
For warranty information and technical support, please refer to the official ClearOne website or contact ClearOne customer service. Keep your purchase receipt for warranty claims.
ClearOne Support: https://www.clearone.com/support





