Aqualux Pool Blaster Max Li User Manual

1. Introduzzjoni

Thank you for choosing the Aqualux Pool Blaster Max Li. This cordless electric vacuum cleaner is designed for efficient and convenient cleaning of pools and spas. Its powerful suction and battery operation allow for thorough cleaning without the need for hoses or external power sources. Please read this manual carefully before operating the device to ensure proper use and maintenance.

2. Informazzjoni dwar is-Sigurtà

• Always disconnect the charger from the unit before use or maintenance.
• Do not operate the vacuum out of water. The motor is designed for underwater use and requires water for cooling.
• Żomm idejk, xagħar, u ħwejjeġ maħlula 'l bogħod minn partijiet li jiċċaqilqu.
• Do not allow children to operate this device. Adult supervision is required.
• Uża biss il-ċarġer li jiġi mal-unità.
• Aħżen l-unità f'post frisk u niexef meta ma tkunx qed tuża.
• Do not attempt to open or repair the battery pack or motor housing. Refer all servicing to qualified personnel.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Pool Blaster Max Li Vacuum Unit
• Batterija tal-jone tal-litju rikarikabbli (integrata)
• Ċarġer tal-batterija
• Borża tal-Filtru li tista' terġa' tintuża
• Adjustable Wide Head
• Pole Adapter (for standard telescopic poles)

4. Prodott Aktarview

Familiarize yourself with the main components of your Pool Blaster Max Li.

Figure 4.1: The Aqualux Pool Blaster Max Li cordless vacuum cleaner, showing its ergonomic design and attachment points.

The unit consists of the main body housing the motor and battery, a removable filter bag compartment, and an adjustable wide head for efficient debris collection. The charging port is located on the main body.

5. Setup u Iċċarġjar

5.1. Iċċarġjar tal-batterija

Before first use, fully charge the battery. The charging port is designed for secure connection.

Figure 5.1: Detail of the charging port on the vacuum unit.

Figure 5.2: Connecting the charger to the Pool Blaster Max Li. Ensure a firm connection.

1. Locate the charging port on the vacuum unit.
2. Qabbad il-kejbil tal-ċarġer mal-port.
3. Ipplaggja l-ċarġer fi żbokk elettriku standard.
4. Allow 8-10 hours for a full charge. The indicator light on the charger will change when charging is complete (refer to charger instructions for specific light behavior).

5.2. Assemblea

1. Insert the reusable filter bag into its designated compartment. Ensure it is securely seated.
2. Attach the adjustable wide head to the front of the vacuum unit. It should click into place.
3. If using with a telescopic pole, attach the pole adapter to the vacuum unit, then slide your standard telescopic pole into the adapter.

6. Operazzjoni

The Pool Blaster Max Li is designed for easy underwater operation.

Figure 6.1: The vacuum unit submerged and actively cleaning the pool floor.

Figure 6.2: The vacuum effectively collecting various debris from the pool bottom.

Figure 6.3: The vacuum in operation, demonstrating the water flow and suction capability.

1. Kun żgur li l-batterija hija kompletament iċċarġjata.
2. Submerge the vacuum unit completely in the water. Ensure no air is trapped inside.
3. Turn on the unit using the power switch (location may vary, typically near the handle).
4. Slowly guide the vacuum across the pool or spa surfaces you wish to clean. Overlap passes to ensure complete coverage.
5. The vacuum will collect debris into the filter bag. Monitor the suction power; if it decreases, the filter bag may need emptying.
6. After cleaning, turn off the unit before removing it from the water.
7. Remove the unit from the water and immediately proceed to maintenance.

7. Manutenzjoni

Regular maintenance ensures optimal performance and extends the life of your Pool Blaster Max Li.

7.1. Cleaning the Filter Bag

The filter bag should be cleaned after each use or when suction power diminishes.

1. Remove the filter bag from the vacuum unit.
2. Empty collected debris into a waste receptacle.
3. Rinse the filter bag thoroughly with a garden hose or under a faucet until clean.
4. Allow the filter bag to air dry completely before storing or reinserting.

7.2. Unit Cleaning and Storage

• Rinse the exterior of the vacuum unit with fresh water after each use.
• Wipe down the unit with a soft cloth.
• Ensure the unit is completely dry before charging or storing.
• Store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures.
• Recharge the battery regularly, even during periods of non-use, to maintain battery health.

8 Issolvi l-problemi

9. Speċifikazzjonijiet Tekniċi

• Mudell: NE4382
• Ditta: Aqualux
• Sors tal-Enerġija: Mħaddma bil-batterija
• Tip ta 'batterija: Lithium-Ion
• Batterija Voltage: 18 Volts
• Run Time: Up to 1 hour (on full charge)
• Ħin mill-ġdid: 8-10 sigħat
• Cleaning Surface Area: Approximately 164.5 m³/h
• Piż tal-oġġett: 3.2 Kilogrammi
• Dimensjonijiet (L x W x H): 45.97 ċm x 27.18 ċm x 20.57 ċm
• Suction Head Width: 27.3 ċm
• Fond Minimu tal-Ilma: 40 ċm
• Materjal: Plastik
• Kulur: Blu
• UPC: 894331001016

10. Garanzija u Appoġġ għall-Klijent

For warranty information or customer support, please refer to the documentation provided with your purchase or contact Aqualux customer service through their official websit jew bejjiegħa bl-imnut awtorizzati. Żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.