Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Focal 165 V20 6.5" 70W RMS Polyglass Series 2-Way Component Speakers System. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.
Istruzzjonijiet tas-Sigurtà
Observe the following safety precautions to prevent damage to the speakers or injury to yourself:
- Installazzjoni Professjonali Rakkomandata: For best results and to avoid damage, professional installation is highly recommended.
- Immaniġġjar tal-Enerġija: Do not exceed the maximum power handling of 140W (70W RMS) to prevent speaker damage.
- Wiring: Ensure all wiring is correctly connected according to the diagrams provided. Incorrect wiring can lead to malfunction or damage.
- Ambjent: Avoid exposing speakers to excessive moisture, extreme temperatures, or direct sunlight. This product is not waterproof.
- Immuntar Sikur: Ensure all components are securely mounted to prevent detachment during vehicle operation.
- Livelli tal-Volum: Espożizzjoni fit-tul għal livelli għoljin ta' volum tista' tikkawża ħsara fis-smigħ. Aġġusta l-volum b'mod responsabbli.
Kontenut tal-Pakkett
Ivverifika li l-komponenti kollha huma preżenti fil-pakkett:
- Speaker drivers (woofers and tweeters)
- Crossovers
- Gradilji
- Ħardwer tal-immuntar
Image: Complete Focal 165 V20 component speaker system, including woofers, tweeters, crossovers, and grilles.
Setup u Installazzjoni
Proper installation is crucial for optimal sound quality. Consider professional installation if you are unfamiliar with car audio wiring and mounting.
1. Mounting the Woofers
- The 6.5-inch woofers require a mounting depth of approximately 2.8 inches.
- Choose a suitable location in your vehicle, typically door panels, ensuring adequate clearance and structural integrity.
- Use the provided mounting hardware to secure the woofers firmly.
Immaġni: Close-up view of the Focal 165 V20 6.5-inch woofer with its protective grille.
2. Tweeter Installation
- The tweeters feature an Aluminum/Magnesium Inverted Dome design.
- Install tweeters in a location that provides optimal sound staging, such as dashboard corners or A-pillars.
- Utilize the included mounting hardware for flush or surface mounting options.
Image: Two Focal 165 V20 inverted dome tweeters, showing their compact design.
3. Connecting the Crossovers
- The system includes 2-way separate crossovers with a 6/12 dB/Octave slope at 4.5kHz.
- Connect the input from your amplifier to the 'INPUT' terminals on the crossover.
- Connect the woofer to the 'WOOFER' terminals and the tweeter to the 'TWEETER' terminals.
- Kun żgur li l-polarità hija korretta (+ għal + u - għal -) għall-konnessjonijiet kollha.
- Mount the crossovers in a dry, accessible location, away from heat sources.
Image: The Focal 165 V20 2-way separate crossover, showing input and output terminals for woofer and tweeter.
Istruzzjonijiet Operattivi
Once installed, connect your Focal 165 V20 speakers to a compatible amplifier. The system is designed to handle a nominal power of 70W RMS and a maximum power of 140W. Adjust amplifier settings, such as gain and equalization, to achieve desired sound quality. Start with low volume and gradually increase to prevent damage to the speakers or your hearing.
Manutenzjoni
To ensure the longevity and performance of your speakers:
- Tindif: Use a soft, dry cloth to clean the speaker grilles and cones. Avoid using harsh chemicals or abrasive materials.
- Spezzjoni: Periodically check all connections for tightness and ensure no wires are frayed or exposed.
- Protezzjoni Ambjentali: Protect speakers from direct exposure to water, dust, and extreme temperatures.
Issolvi l-problemi
Jekk tiltaqa' ma' problemi, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
- Ebda Ħsejjes:
- Iċċekkja l-konnessjonijiet tal-wajers kollha mill- amplifier to the crossovers and speakers.
- Ivverifika l- amplifier huwa mixgħul u jaħdem b'mod korrett.
- Ensure the audio source is active and properly connected.
- Ħoss Mgħawġ:
- Reduce the volume level; distortion often occurs at excessively high volumes.
- Iċċekkja amplifier gain settings; ensure they are not set too high.
- Inspect speaker cones for any physical damage.
- Kelliem Wieħed Mhux Jaħdem:
- Check the specific speaker's wiring and crossover connections.
- Swap the non-working speaker with a working one (if possible) to determine if the issue is with the speaker or the wiring/ampkanal lifier.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Fokali |
| Numru tal-Mudell | 165 V20 |
| Tip ta' Kelliem | Komponent |
| Daqs tal-Kelliem | 6.5 Pulzier |
| Nominal Power (RMS) | 70 Watts |
| Qawwa massima tal-Ħruġ | 140 Watts |
| Dijametru tal-Woofer | 6.5 Pulzier |
| Fond tal-Immuntar | 2.8 Pulzier |
| Tip ta 'Tweeter | Aluminum/Magnesium Inverted Dome |
| Tip ta 'Crossover | 2-Way Separate Crossover: 6/12 dB/Oct (4.5kHz) |
| Teknoloġija tal-Konnettività | Coaxial (for connection type, though speakers are component) |
| Komponenti Inklużi | Speaker drivers, crossovers, grilles, mounting hardware |
| Piż tal-oġġett | 8 Liri |
| Livell ta 'Reżistenza għall-Ilma | Mhux Reżistenti għall-Ilma |
Garanzija u Appoġġ
The Focal 165 V20 Component Speakers System comes with a limited warranty provided by the manufacturer, Focal. For specific warranty terms, duration, and conditions, please refer to the documentation included with your purchase or visit the official Focal website. For technical support, service, or warranty claims, please contact Focal customer service directly.
Manifattur: Fokali
