Manwali+

Connects2 CTSVX006

Autoleads CTSVX006 Steering Wheel Stalk Control Interface Lead User Manual

Model: CTSVX006 | Brand: Connects2

Introduzzjoni

The Autoleads CTSVX006 Steering Wheel Stalk Control Interface Lead is designed to allow an aftermarket head unit to be installed into a vehicle while retaining the use of the original steering wheel controls. This interface translates the vehicle's steering wheel control signals into a format compatible with your new stereo system, ensuring seamless integration and continued convenience.

This manual provides essential information for the proper installation, operation, and maintenance of your CTSVX006 interface lead. Please read all instructions carefully before beginning installation.

Informazzjoni dwar is-Sigurtà

  • Always disconnect the vehicle's battery negative terminal before performing any electrical work to prevent short circuits and damage to the vehicle's electrical system.
  • Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati sew biex tevita xorts elettriċi.
  • If you are unsure about any part of the installation process, consult a qualified automotive electrician.
  • Do not modify the interface lead or its wiring. Unauthorized modifications can void the warranty and may cause damage.

Kontenut tal-Pakkett

Malli tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:

  • 1 x Autoleads CTSVX006 Steering Wheel Stalk Control Interface Lead
  • (Additional components, if any, would be listed here by the manufacturer)
Autoleads CTSVX006 Steering Wheel Control Interface Lead with various connectors and wiring

Image showing the Autoleads CTSVX006 interface lead. It consists of a black control module on the right, with multiple colored wires extending from it. These wires connect to various white and black multi-pin connectors, designed to integrate with vehicle wiring harnesses and aftermarket head units.

Setup u Installazzjoni

This interface lead is compatible with:

  • Vauxhall Movano (2013 onwards)
  • Vauxhall Vivaro (2012 onwards)

Passi ta' Installazzjoni:

  1. Preparazzjoni: Ensure the vehicle's ignition is off and disconnect the negative terminal of the car battery.
  2. Neħħi l-Unità Prinċipali Oriġinali: Carefully remove the factory-fitted stereo from the dashboard. Refer to your vehicle's service manual for specific instructions on removing the head unit.
  3. Connect Interface to Vehicle: Connect the vehicle-specific connector(s) from the CTSVX006 interface lead to the corresponding wiring harness in the vehicle's dashboard. These connectors are designed to plug directly into the factory wiring.
  4. Connect Interface to Aftermarket Head Unit: Connect the other end of the CTSVX006 interface lead to your aftermarket head unit. This typically involves connecting the ISO connectors (power and speaker wires) and the steering wheel control wire (often a single wire or a 3.5mm jack, depending on your head unit's brand). Consult your aftermarket head unit's manual for its specific steering wheel control input.
  5. Konnessjonijiet tat-Test: Before fully reassembling the dashboard, reconnect the vehicle battery. Turn on the ignition and the aftermarket head unit. Test all steering wheel control functions (volume up/down, track skip, mode, etc.) to ensure they operate correctly.
  6. Assigura u Erġa' Arma: Once confirmed working, carefully secure all wiring and the interface module within the dashboard cavity. Reinstall the aftermarket head unit and any trim panels removed during the process.

Note: Specific wiring colors and pin assignments may vary. Always refer to the detailed wiring diagram provided with your aftermarket head unit and, if available, the vehicle's wiring diagram.

Istruzzjonijiet Operattivi

Once correctly installed, the Autoleads CTSVX006 interface lead operates automatically. It acts as a bridge between your vehicle's steering wheel controls and your aftermarket head unit.

  • Kontroll tal-Volum: Use the volume up/down buttons on your steering wheel to adjust the audio level of your aftermarket head unit.
  • Track/Station Control: Use the track skip or seek buttons to change tracks (for media playback) or radio stations (for tuner).
  • Modalità/Sors: The mode or source button on your steering wheel should cycle through the available audio sources on your aftermarket head unit (e.g., Radio, USB, Bluetooth, AUX).
  • Sejħa Tweġiba/Tmiem: If your aftermarket head unit supports Bluetooth hands-free calling, the call answer/end buttons on your steering wheel should function as intended.

The exact functionality of each button may depend on the specific aftermarket head unit and the original vehicle's steering wheel control configuration. Some head units may require a specific setting to enable steering wheel control functionality.

Manutenzjoni

The Autoleads CTSVX006 interface lead is designed to be a fit-and-forget component and requires minimal maintenance once installed.

  • Tindif: Keep the area around the interface module free from excessive dust or moisture. As it is typically installed behind the dashboard, regular cleaning is not usually necessary.
  • Kundizzjonijiet Ambjentali: Ensure the module is not exposed to extreme temperatures or direct moisture.
  • L-ebda Partijiet li jistgħu jservu mill-utent: The interface lead contains no user-serviceable parts. Do not attempt to open or repair the module.

Issolvi l-problemi

If you encounter issues with your CTSVX006 interface lead, please refer to the following troubleshooting steps:

ProblemaKawża PossibbliSoluzzjoni
Il-kontrolli tal-istering ma jaħdmux.
  • Konnessjonijiet tal-wajers mhux korretti.
  • Aftermarket head unit not configured for steering wheel controls.
  • Incompatible head unit or vehicle.
  • Konnessjoni maħlula.
  • Double-check all wiring connections against the installation guide.
  • Refer to your head unit's manual to ensure steering wheel control input is enabled and correctly configured.
  • Verify vehicle compatibility (Vauxhall Movano 2013+, Vivaro 2012+).
  • Ensure all plugs are fully seated.
Some controls work, but others do not.
  • Partial wiring issue.
  • Head unit programming limitation.
  • Re-check specific wire connections for the non-working functions.
  • Some aftermarket head units may not support all original steering wheel functions. Consult your head unit's manual.
Intermittent control function.
  • Konnessjoni maħlula.
  • Faulty interface module.
  • Spezzjona l-konnessjonijiet kollha għal laxkezza jew korrużjoni.
  • If all connections are secure, the module may be faulty. Contact customer support.

If troubleshooting steps do not resolve the issue, please contact Connects2 customer support or your product retailer for further assistance.

Speċifikazzjonijiet

KaratteristikaDettall
Numru tal-MudellCTSVX006
BrandTqabbad2
Dimensjonijiet tal-Prodott11.81 x 9.84 x 1.97 inches (30.0 L x 25.0 W x 5.0 H cm)
Piż tal-oġġett10.6 uqija
ManifatturC2/AUTOLEADS
Kompatibbiltà tal-VetturaVauxhall Movano (2013 onwards), Vauxhall Vivaro (2012 onwards)
FunzjoniRetains steering wheel controls with aftermarket head unit

Garanzija u Appoġġ

This product is covered by a manufacturer's warranty. Please refer to the warranty information provided by Connects2 or your retailer at the time of purchase for details regarding warranty period and terms.

For technical support, installation queries, or warranty claims, please contact your product retailer or Connects2 directly. Contact information can typically be found on the manufacturer's official websit.

When contacting support, please have your product model number (CTSVX006) and proof of purchase readily available.

Dokumenti Relatati - CTSVX006

Preview Manwal tal-Istruzzjonijiet tal-Interfaċċja tal-Kontroll tal-Istering Wheel Connects2 CTSNS017.2 Nissan
Manwal ta' struzzjoni għall-Connects2 CTSNS017.2, interfaċċja tal-kontroll tal-istering iddisinjata biex iżżomm il-kontrolli oriġinali tal-istering fil-vetturi Nissan. Ikopri l-installazzjoni, il-wajers, u l-kompatibilità għal mudelli inklużi X-Trail, Almera, Primera, u Terrano.
Preview Connects2 CTSFA004.2 Interfaċċja tal-Kontroll tal-Istering għal Fiat, Citroen, Peugeot, Vauxhall
Gwida għall-installazzjoni u l-karatteristiċi tal-Interfaċċja tal-Kontroll tal-Istering Wheel CAN-Bus Connects2 CTSFA004.2, kompatibbli ma' diversi mudelli Fiat, Citroen, Peugeot, u Vauxhall. Tinkludi kodiċijiet tal-wajers u struzzjonijiet għat-twaħħil.
Preview Manwal tal-Installazzjoni tal-Kontroll tal-Istering Universali Connects2 UNI-SWC.4
Manwal ta' struzzjonijiet komprensiv għall-Connects2 UNI-SWC.4, li jagħti dettalji dwar l-installazzjoni, il-konnessjonijiet tal-interfaċċja, is-settings tad-dipswitch, u informazzjoni dwar il-wajers speċifika għall-karozza għal vetturi CAN-Bus u analogi.
Preview Gwida għall-Installazzjoni tal-Patch Lead CTSMARTLEAD għal Unitajiet tar-Ras tat-Tagħlim Analogi
Gwida għall-installazzjoni ta' Connects2 CTSMARTLEAD għall-konnessjoni ta' unitajiet ewlenin ta' tagħlim analogu ma' stereos tal-karozzi aftermarket. Tgħallem kif tintegra l-kontrolli tal-istering.
Preview Gwida għall-Installazzjoni tal-Interfaċċja tal-Kontroll tal-Istering Wheel ta' Connects2 CTSPG007.2 Peugeot
Dan id-dokument jipprovdi struzzjonijiet għall-installazzjoni u dettalji tal-prodott għall-Interfaċċja tal-Kontroll tal-Istering Wheel CAN-Bus Connects2 CTSPG007.2, iddisinjata għal ċerti vetturi Peugeot. Ikopri l-applikazzjoni tal-vettura, il-karatteristiċi ewlenin, il-kodiċijiet tal-wajers, il-proċeduri tal-immuntar, u l-funzjonalità tal-kontroll tal-istering wheel.
Preview Connects2 CTSVX001.2 Interfaċċja tal-Kontroll tal-Istering għal Vauxhall, Opel, Chevrolet, Suzuki, Holden
Gwida dettaljata għall-interfaċċja tal-kontroll tal-istering analogu Connects2 CTSVX001.2, kompatibbli ma' diversi vetturi Vauxhall, Opel, Chevrolet, Suzuki, u Holden. Tinkludi passi ta' installazzjoni, kodiċijiet tal-wajers, u funzjonalità.