Galcon 8118 AC-GQ8 8-Station Indoor Controller User Manual

Introduzzjoni

The Galcon 8118 AC-GQ8 is an advanced indoor irrigation and low voltage lighting controller designed for efficient management of your watering and lighting systems. This controller supports up to 8 stations, configurable as 8 irrigation zones or 7 irrigation zones plus 1 low voltage lighting zone. It offers flexible programming options including daily, odd, even, and cyclic schedules, along with a dedicated program for low voltage applikazzjonijiet.

Image: The Galcon 8118 AC-GQ8 controller, showing its grey casing, control panel with LCD display, and a protective cover.

Setup u Installazzjoni

This section provides instructions for the proper setup and installation of your Galcon 8118 AC-GQ8 controller.

Immuntar tal-Kontrollur

• Select a suitable indoor location away from direct sunlight, extreme temperatures, and moisture.
• Ensure the location allows for easy access to a standard electrical outlet and irrigation valve wiring.
• Use appropriate screws to securely mount the controller to a wall.

Konnessjonijiet tal-Wiring

• Konnessjoni tal-Enerġija: Connect the controller to a standard AC power outlet.
• Wajers tal-Valv: Connect each irrigation valve's common wire to the controller's common terminal (C). Connect each individual valve's hot wire to its corresponding station terminal (1-8).
• Master Valve/Pump Start Relay (Optional): If using a master valve or pump start relay, connect its common wire to the common terminal and its hot wire to the designated master valve terminal (M).
• Sensor Input (Optional): The controller supports various sensors (rain, temperature, wind, soil). Connect sensor wires to the dedicated sensor terminals as per the sensor's instructions.
• Vol baxxtage Lighting (Optional): Għal vol baxxtage lighting applications, a separate relay is required (not included). Connect the relay to the designated low voltage output terminal (X) and common.

Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati biex jipprevjenu short circuits.

Istruzzjonijiet Operattivi

This section details how to program and operate your Galcon 8118 AC-GQ8 controller for irrigation and low voltage dawl.

L-issettjar tal-Ħin u d-Data Kurrenti

• Rotate the dial to the "SET CLOCK" position.
• Use the arrow buttons to adjust the time and date.
• Press "ENTER" or rotate the dial to save settings.

Programming Irrigation Programs (A, B, C)

The controller offers three independent irrigation programs (A, B, C) with flexible scheduling options.

1. Agħżel il-Programm: Rotate the dial to "PROGRAM A", "PROGRAM B", or "PROGRAM C".
2. Issettja l-Ħinijiet tal-Bidu: Each program can have up to 4 start times. Rotate the dial to "START TIME" and use arrow buttons to set.
3. Set Station Run Times: Rotate the dial to "RUN TIME". Select each station (1-8) and set its irrigation duration from 1 minute to 4 hours.
4. Issettja l-Jiem tat-Tisqija: Rotate the dial to "WATERING DAYS". Choose from:
   • Kuljum: Select specific days of the week.
   • Stramb: Waters on odd-numbered days.
   • Anke: Waters on even-numbered days.
   • Cyclic: Waters every 1 to 31 days. Set the cycle length.

Aġġustament Staġjonali

Adjust all program run times simultaneously from 10% to 190% of their set duration.

• Rotate the dial to "SEASONAL ADJUST".
• Use arrow buttons to set the desired percentage.

Funzjoni Dewmien tax-Xita

Temporarily suspend irrigation for up to 240 days.

• Rotate the dial to "RAIN DELAY".
• Use arrow buttons to set the number of delay days.

Vol baxxtage Lighting Program (X)

This program operates independently of irrigation schedules.

• Rotate the dial to "PROGRAM X".
• Set the desired ON/OFF times for the low voltage dawl.

Manual Operation / System Test

To manually run a station or test the system:

• Rotate the dial to "MANUAL".
• Select the desired station and set its run time.
• The controller will activate the selected station immediately.

Manutenzjoni

Manutenzjoni xierqa tiżgura l-lonġevità u l-prestazzjoni ottimali tal-kontrollur tiegħek.

• Tindif: Wipe the controller's exterior with a soft, damp drapp. Tużax tindif jew solventi li joborxu.
• Provvista tal-Enerġija: Ensure the power supply is stable. In areas prone to power surges, consider using a surge protector.
• Backup tal-batterija: The controller may use a 9V battery for program retention during power outages. Check and replace the battery annually or as needed.
• Spezzjoni tal-Wiring: Periodically inspect all wiring connections for corrosion or damage.

Issolvi l-problemi

This section addresses common issues you might encounter with your Galcon 8118 AC-GQ8 controller.

If issues persist after following these steps, contact Galcon customer support.

Speċifikazzjonijiet

• Numru tal-Mudell: GAEDS2U0258
• Numru ta' Stazzjonijiet: 8 (7 irrigation + 1 low voltage lighting, or 8 irrigation)
• Programmi: 3 (A, B, C) for irrigation, 1 (X) for low voltagdawl tad-dawl
• Ħinijiet tal-bidu għal kull Programm: Sa 4
• Tul ta' żmien tal-irrigazzjoni: 1 minuta sa 4-il siegħa
• Cyclic Watering: Every 1 to 31 days
• Aġġustament Staġjonali: 10% sa 190%
• Dewmien tax-xita: Sa 240 jum
• Input tas-Sensor: Compatible with rain, temperature, wind, soil sensors
• Sors tal-Enerġija: AC (details not specified, assuming standard household current)
• Batterija: 1 x 9V battery required (for program retention)
• Dimensjonijiet tal-Prodott: 6.1 x 19.81 x 25.65 ċm
• Piż tal-oġġett: 680.39 g (1.5 Liri)
• Tip ta' wiri: LCD jew LED
• Kulur: Griż
• Manifattur: Galkon

Garanzija u Appoġġ

For information regarding product warranty, technical support, or service, please refer to the official Galcon webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta’ garanzija.

Galcon Contact Information: Jekk jogħġbok żur www.galcon.co.il for the most up-to-date support resources and contact details.