1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your UHPPOTE UT-RL-209 Wired Two-Way Audio Intercom Doorphone. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. Prodott Aktarview
The UHPPOTE UT-RL-209 is a non-visual, one-to-one wired intercom system designed for two-way audio communication. It is suitable for various environments such as offices, warehouses, and residential settings. The system consists of two intercom units that communicate over a wired connection.
Karatteristiċi ewlenin:
- Komunikazzjoni awdjo f'żewġ direzzjonijiet.
- Wired connection for reliable communication.
- Maximum operating distance of 200 meters (656 feet) when connected with RVV2 (2 PIN) cable.
- Flexible power options: 110VAC power adapter or 4x AA 1.5V alkaline batteries per unit (batteries not included).
- Adjustable ringtone volume.
- Easy installation and simple operation.
Figura 1: Quddiem view of the UHPPOTE UT-RL-209 Intercom Doorphone units.
3. Kontenut tal-Pakkett
Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:
- 2 x UHPPOTE UT-RL-209 Intercom Units
- 2 x AC Power Adapters (US style plug)
- 1 x 3.3ft Connection Cable (for initial setup or short distances)
4. Setup u Installazzjoni
4.1 Konnessjoni tal-Wiring
The two intercom units must be wired to each other for communication. Use a twin conductor cable for connection. The effective talking distance is up to 200 meters (656 feet) when using RVV2 (2 PIN) cable, provided the wire resistance is less than 60 ohms. Pay attention to the polarity (color of conductors) when connecting.
Figura 2: Qiegħ view of intercom units showing wiring connection points.
4.2 Provvista tal-Enerġija
Each intercom unit requires power. You have two options:
- Qawwa AC: Plug the provided 110VAC power adapter into a standard wall outlet and connect it to the power input port on the intercom unit.
- Qawwa tal-batterija: Insert four (4) R6P size AA 1.5V alkaline batteries into the battery compartment located on the bottom of each unit. Ensure correct polarity. Batteries are not included.
Figura 3: Qiegħ view showing battery compartments for AA batteries.
4.3 Immuntar
The intercom units can be mounted on a wall or placed on a flat surface. Use the mounting holes on the bottom of each unit for secure wall installation. Ensure the units are placed in locations where the wired connection can be maintained within the specified distance.
Figura 4: Ġenb view of intercom units with power and handset cords connected.
5. Istruzzjonijiet Operattivi
5.1 Tagħmel Sejħa
To initiate a call to the other unit:
- Pick up your handset.
- Press and hold the call button (typically located on the side or front of the unit).
- The bell on the other handset will ring.
- Speak into the microphone on your handset.
- Once the conversation is complete, replace your handset to end the call and conserve power.
5.2 Riċeviment ta' Sejħa
When the bell rings on your unit:
- Aqbad l-idejn.
- Begin speaking.
- Replace the handset when the conversation is finished.
5.3 Aġġustament tal-Volum
The ringtone volume can be adjusted on each unit. Refer to the specific unit for the location of the volume control dial or switch.
6. Manutenzjoni
- Tindif: Use a soft, dry cloth to clean the exterior of the intercom units. Do not use liquid cleaners or abrasive materials.
- Sostituzzjoni tal-batterija: If using battery power, replace all four AA batteries in both units simultaneously when performance degrades or the low battery indicator (if present) illuminates.
- Spezzjoni tal-Cable: Periodically check the connection cable for any signs of wear or damage. Replace damaged cables immediately to ensure proper operation and safety.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No power to unit(s) | AC adapter unplugged or faulty; batteries depleted or incorrectly inserted. | Check AC adapter connection and power outlet. Replace batteries, ensuring correct polarity. |
| Ebda ħoss jew kwalità fqira tal-ħoss | Loose or incorrect wiring; damaged cable; distance exceeds maximum range; handset not picked up. | Verify all wiring connections are secure and correct. Inspect cable for damage. Ensure units are within 200m range. Confirm handset is picked up during conversation. |
| Ringtone not working | Volume too low; wiring issue. | Adjust ringtone volume. Check wiring connections. |
| Komunikazzjoni intermittenti | Loose connection; cable damage; interference. | Secure all connections. Inspect and replace damaged cables. Ensure cable is not near strong electrical interference sources. |
8. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | UT-RL-209 |
| Tip | Non-Visual One-to-one Wired Intercom |
| Komunikazzjoni | Awdjo Two-Way |
| Distanza Operattiva Max | 200 meters (656 feet) with RVV2 (2 PIN) cable |
| Sors tal-Enerġija | AC 110V or 4 x AA 1.5V batteries per unit |
| Voltage | 12-il Volt (volum operattiv intern)tage) |
| Materjal | Plastik |
| Kulur | Abjad |
| Piż tal-oġġett | 1.14 pounds (per pair) |
| Dimensjonijiet tal-Pakkett | 9.49 x 8.5 x 5 pulzieri |
9. Garanzija u Appoġġ
UHPPOTE products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official UHPPOTE websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.
