Manwali+

UHPPOTE HBK-A02

Manwal tal-Utent tat-Tastiera tal-Kontroll tal-Aċċess tal-Bieb Awtonoma UHPPOTE HBK-A02 125KHz RFID

Model: HBK-A02

1. Introduzzjoni

This manual provides detailed instructions for the installation, programming, operation, and maintenance of the UHPPOTE HBK-A02 125KHz RFID Standalone Door Access Control Keypad. This device is designed to provide secure access control for various applications, supporting up to 1000 card users.

Quddiem view of the UHPPOTE HBK-A02 access control keypad with illuminated buttons and a red indicator light.

Figure 1: UHPPOTE HBK-A02 Keypad Front View

2. Karatteristiċi ewlenin

  • High quality and high security, sensitively and response quickly.
  • Full programming from the keypad, support add/delete cards, set password, etc.
  • Door bell button support external doorbell.
  • Uses high-performance MCU for stable performance and low-power circuit for extended service life.
  • Functions as a standalone keypad, no computer connection required.
  • Suitable for factories, houses, residential quarters, offices, and mechanical/electrical control equipment.

3. Speċifikazzjonijiet

KaratteristikaDettall
Numru tal-MudellHBK-A02
ManifatturUHPPOTE
Input Voltage12 Volts DC
Dimensjonijiet tal-Prodott4.72 x 3.07 x 0.87 pulzieri
Piż tal-oġġett3.21 uqija (91 Grammi)
Frekwenza RFID125KHz
Kapaċità tal-UtentUp to 1000 Card Users
KulurIswed
UPC701385688196

4. Installazzjoni

Proper installation is crucial for the optimal performance and security of your access control keypad. Ensure all power is disconnected before beginning installation.

4.1 Immuntar tat-Tastiera

  1. Choose a suitable mounting location near the door, ensuring it is protected from direct weather exposure if installed outdoors.
  2. Use the provided mounting screws to secure the back plate of the keypad to the wall.
  3. Route the necessary wiring through the wall or conduit to the keypad's connection point.
  4. Attach the keypad front panel to the back plate after wiring is complete.
UHPPOTE HBK-A02 access control keypad mounted on a brick wall next to a white door, with a hand holding a blue RFID card near the keypad for access.

Figure 2: Keypad Mounted on a Door Frame

4.2 Konnessjonijiet tal-Wiring

The HBK-A02 keypad requires a 12V DC power supply. Carefully follow the wiring diagrams below. Incorrect wiring can damage the device or connected components.

Wara view of the UHPPOTE HBK-A02 access control keypad, showing the wiring harness with multiple colored wires connected to a white terminal block. Product model and input voltage information are visible on the label.

Figura 3: Wara View of Keypad with Wiring Harness

Mill-qrib wara view of the UHPPOTE HBK-A02 access control keypad, highlighting the wiring terminal block and the label with model HBK-A02, input 12VDC, and FCC ID.

Figure 4: Close-up of Wiring Terminal Block

4.2.1 Common Power Supply Diagram

This diagram illustrates connections when using a single power supply for both the keypad and the electric lock.

Wiring diagram for the UHPPOTE HBK-A02 access control keypad using a common power supply, showing connections for power, exit button, fail-secure lock, fail-safe lock, and bell.

Figure 5: Common Power Supply Wiring Diagram

4.2.2 Special Power Supply Diagram

This diagram shows connections when using a dedicated access control power supply unit, which often includes battery backup and advanced control features.

Wiring diagram for the UHPPOTE HBK-A02 access control keypad using a special power supply, detailing connections for power, exit button, fail-secure lock, fail-safe lock, and bell.

Figure 6: Special Power Supply Wiring Diagram

5. Programmazzjoni

The keypad is programmed directly using the numeric buttons. The default master code is 123456.

5.1 Dħul fil-Modalità ta' Programmazzjoni

  1. Agħfas *.
  2. Enter the 6-digit Master Code (default: 123456).
  3. Agħfas #.
  4. The red LED will flash, indicating programming mode.

5.2 Exiting Programming Mode

Agħfas * to exit programming mode at any time.

5.3 Tibdil tal-Kodiċi Master

  1. Idħol fil-Modalità ta' Programmazzjoni.
  2. Agħfas 0.
  3. Enter the new 6-digit Master Code.
  4. Enter the new 6-digit Master Code again to confirm.
  5. Agħfas #.
  6. Ħruġ mill-Modalità ta' Programmazzjoni.

5.4 Adding User Cards/Codes

The keypad supports up to 1000 user cards or codes.

  1. Idħol fil-Modalità ta' Programmazzjoni.
  2. Agħfas 1.
  3. For RFID cards: Present the card to the keypad. The keypad will beep to confirm. Repeat for additional cards.
  4. For User Codes: Enter a 4-digit to 6-digit user code, then press #. Enter the code again and press # biex tikkonferma.
  5. Ħruġ mill-Modalità ta' Programmazzjoni.

5.5 Deleting User Cards/Codes

  1. Idħol fil-Modalità ta' Programmazzjoni.
  2. Agħfas 2.
  3. For RFID cards: Present the card to the keypad. The keypad will beep to confirm deletion. Repeat for additional cards.
  4. For User Codes: Enter the 4-digit to 6-digit user code to delete, then press #.
  5. Ħruġ mill-Modalità ta' Programmazzjoni.

5.6 Setting Relay Unlock Time

This sets how long the door remains unlocked after a valid access. The default is 5 seconds.

  1. Idħol fil-Modalità ta' Programmazzjoni.
  2. Agħfas 3.
  3. Enter a 2-digit number for the unlock time in seconds (e.g., 05 għal 5 sekondi, 00 għal 0.2 sekondi).
  4. Agħfas #.
  5. Ħruġ mill-Modalità ta' Programmazzjoni.

6. Operazzjoni

6.1 Kif Tikseb Aċċess

  • Using an RFID Card: Present a registered RFID card to the keypad. The keypad will beep, and the door will unlock for the set duration.
  • Using a User Code: Enter your registered user code (4-6 digits) followed by #. The keypad will beep, and the door will unlock for the set duration.

6.2 Doorbell Function

Agħfas il- Qanpiena button on the keypad to activate an external doorbell (if connected).

7. Manutenzjoni

  • Tindif: Wipe the keypad surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Protezzjoni Ambjentali: Ensure the keypad is protected from extreme temperatures, direct sunlight, and moisture to prolong its lifespan.
  • Ittestjar regolari: Periodically test the keypad's functionality, including card/code access and the exit button, to ensure proper operation.

8 Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Keypad does not power on.L-ebda provvista tal-enerġija jew wajers mhux korretti.Check 12V DC power supply connection and wiring according to diagrams.
Door does not unlock with valid card/code.Card/code not registered, incorrect code, or lock wiring issue.Verify card/code registration. Check wiring to the electric lock (NO/NC/COM). Ensure relay unlock time is set correctly.
Keypad beeps continuously or acts erratically.Interference or internal fault.Disconnect power for 30 seconds and reconnect. If problem persists, contact support.
Cannot enter programming mode.Incorrect Master Code or not following sequence.Ensure you are using the correct 6-digit Master Code (default 123456) and the sequence * + Kodiċi Prinċipali + #.

9. Informazzjoni dwar is-Sigurtà

  • Dejjem skonnettja l-enerġija qabel ma tagħmel xi wajers jew manutenzjoni.
  • Ensure all wiring connections are secure and insulated to prevent short circuits.
  • Tesponix l-apparat għall-ilma jew għal umdità eċċessiva.
  • This device is intended for low-voltage applications (12V DC). Do not connect to higher voltagsorsi e.
  • L-installazzjoni għandha titwettaq minn persunal kwalifikat jekk m'intix ċert dwar il-wajers elettriċi.

Dokumenti Relatati - HBK-A02

Preview UHPPOTE HBK-A02 Manwal tal-Utent tat-Tastiera tal-Kontroll tal-Aċċess
Manwal komprensiv għall-utent għat-Tastiera tal-Kontroll tal-Aċċess UHPPOTE HBK-A02, li jagħti dettalji dwar l-installazzjoni, l-ispeċifikazzjonijiet, it-tħaddim, il-wajers, u s-soluzzjoni tal-problemi. Jappoġġja karti RFID u aċċess bil-PIN.
Preview Manwal tal-Utent tat-Terminal tal-Kontroll tal-Aċċess RFID TFT ta' 2.4 pulzieri UHPPOTE HBK-A04T
Manwal tal-utent għat-Terminal tal-Kontroll tal-Aċċess RFID TFT UHPPOTE HBK-A04T ta' 2.4 pulzieri, li jiddeskrivi l-installazzjoni, is-setup, il-ġestjoni tal-utenti, is-settings tal-bibien, il-konfigurazzjoni tal-apparat, u l-integrazzjoni tat-Tuya Smart APP.
Preview Manwal tal-Utent u Gwida għall-Installazzjoni tal-Qarrej RFID Wiegand UHPPOTE HBK-D01
Dan id-dokument jipprovdi informazzjoni komprensiva għall-qarrej tal-RFID UHPPOTE HBK-D01 Wiegand, inklużi l-karatteristiċi tiegħu, l-ispeċifikazzjonijiet tekniċi, l-istruzzjonijiet tal-wajers, il-gwida tal-installazzjoni, u d-dettalji tal-konformità mal-FCC. Iddisinjat għal sistemi ta' kontroll tal-aċċess, joffri prestazzjoni affidabbli u durabilità.
Preview UHPPOTE HBK-A03 Manwal tal-Utent tat-Tastiera tal-Kontroll tal-Aċċess
Manwal tal-utent għat-Tastiera tal-Kontroll tal-Aċċess UHPPOTE HBK-A03, li jiddeskrivi l-karatteristiċi, l-ispeċifikazzjonijiet, l-installazzjoni, il-wajers, u t-tħaddim tagħha.
Preview UHPPOTE HBK-A01 Manwal tal-Utent tat-Tastiera tal-Kontroll tal-Aċċess
Manwal tal-utent għat-Tastiera tal-Kontroll tal-Aċċess UHPPOTE HBK-A01, li jiddeskrivi l-installazzjoni, l-ispeċifikazzjonijiet, il-karatteristiċi, it-tħaddim, u s-soluzzjoni tal-problemi.
Preview Manwal tal-Utent tal-Qarrej tal-RFID Wiegand tal-UHPPOTE HBK-D02K
Manwal tal-utent għall-UHPPOTE HBK-D02K Wiegand RFID Reader, li jkopri l-introduzzjoni, il-karatteristiċi, l-ispeċifikazzjonijiet, il-wajers, l-installazzjoni, u t-twissijiet tal-FCC.