Manwal tal-Utent tat-Tastiera tal-Kontroll tal-Aċċess tal-Bieb UHPPOTE 125KHz RFID Stand-Alone

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of the UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad (Model HBK-A01). This device is designed to provide secure and convenient access control using both RFID transponder technology and keypad PIN entry.

Key features include contactless RFID operation, full programming directly from the keypad without requiring a computer, and robust construction with an ABS plastic shell. It also incorporates lock output current short circuit protection, enhancing its reliability. The keypad is suitable for various applications, including factories, residential areas, offices, and mechanical/electrical control equipment.

Figura 1: Quddiem view of the UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad.

2. X'hemm fil-Kaxxa

Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• 1 x Access Control Keypad (Model HBK-A01)
• 1 x Manwal tal-Utent bl-Ingliż (dan id-dokument)
• 4 x Rubber Plugs (for shell fixing)
• 4 x Self-Tapping Screws (for shell fixing)

Figure 2: The product packaging, showing the included keypad.

3. Speċifikazzjonijiet

Figura 3: Wara view and internal circuit board of the keypad, highlighting its components.

4. Setup u Installazzjoni

4.1 Installazzjoni Fiżika

Follow these steps for physical installation of the keypad:

1. Carefully open the keypad housing.
2. Mount the backplate of the keypad securely to the desired wall or door frame using the provided self-tapping screws and rubber plugs. Ensure the mounting surface is stable.
3. Route the necessary wiring through the designated opening in the backplate.
4. Attach the main keypad unit to the mounted backplate, ensuring it clicks securely into place.

Figure 4: Illustrated guide for mounting the keypad on a wall.

4.2 Konnessjonijiet tal-Wiring

Proper wiring is crucial for the correct operation of the access control keypad. Refer to the diagrams below for connecting the keypad to an electric lock, exit button, and external bell. Ensure all connections are secure and follow local electrical codes.

• Wiring Diagram 1: Basic Connection

  

  Figure 5: Basic wiring diagram for power, electric lock (fail-secure/fail-safe), and exit button.

• Wiring Diagram 2: With External Power Supply

  

  Figure 6: Wiring diagram including an external 12VDC power supply for the system.

5. Istruzzjonijiet Operattivi

The UHPPOTE HBK-A01 keypad can be programmed directly using the keypad. Below are common operating procedures. For a visual guide, please refer to the operation video provided.

5.1 Change Admin Password

The default admin password is 123456. It is highly recommended to change this immediately after installation for security purposes. The admin password should be 4-8 digits.

1. Daħħal: # 123456 # 0 (This enters programming mode and selects the admin password change function).
2. Input your new admin password (4-8 digits).
3. Agħfas # biex tikkonferma.
4. Input the new admin password again to verify.
5. Agħfas # biex tikkonferma u toħroġ.

(Refer to Video 1, timestamp 0:17 - 0:46 for a demonstration of changing the admin password.)

5.2 Add Card Users

This method allows you to add RFID cards to the system for access.

1. Daħħal: # [Admin Password] # 1 0 (This enters programming mode and selects the add card user function).
2. Place the RFID card you wish to add onto the keypad. The keypad will beep to confirm successful addition.
3. If you have more cards to add, place them one by one on the keypad.
4. Agħfas # after adding all cards to exit.

(Refer to Video 1, timestamp 0:47 - 0:1:11 for a demonstration of adding card users.)

5.3 Add Card Users with ID Number

You can also add cards by manually entering a user ID number. The user ID number is any 4-digit number from 0001 to 9999.

1. Daħħal: # [Admin Password] # 1 1 (This enters programming mode and selects the add card user by ID function).
2. Input the 4-digit user ID number (e.g., 0001).
3. Agħfas # biex tikkonferma.
4. Place the RFID card corresponding to the entered ID number onto the keypad. The keypad will beep to confirm successful addition.
5. Agħfas # għall-ħruġ.

(Refer to Video 1, timestamp 0:1:12 - 0:1:41 for a demonstration of adding card users with an ID number.)

5.4 Add or Change PIN Users

This procedure allows you to add new PIN users or change existing PINs. The password should be 4-8 digits, and cannot be all zeros.

1. Daħħal: # [Admin Password] # 1 2 (This enters programming mode and selects the add/change PIN user function).
2. Input the 4-digit user ID number (e.g., 0001).
3. Agħfas # biex tikkonferma.
4. Input the new 4-8 digit PIN.
5. Agħfas # biex tikkonferma.
6. Input the new PIN again to verify.
7. Agħfas # biex tikkonferma u toħroġ.

(Refer to Video 1, timestamp 0:1:42 - 0:2:16 for a demonstration of adding or changing PIN users.)

5.5 To Set or Change a PIN of an Added Card

This operation is performed outside of the programming mode. Ensure the card has already been programmed to this keypad.

1. Place the added RFID card on the keypad.
2. Daħħal: # # (This initiates the PIN change for the presented card).
3. Input the new 4-8 digit PIN.
4. Agħfas # biex tikkonferma.
5. Input the new PIN again to verify.
6. Agħfas # to confirm. The keypad will beep to indicate success.

(Refer to Video 1, timestamp 0:2:17 - 0:2:50 for a demonstration of setting or changing a PIN for an added card.)

6. Manutenzjoni

To ensure the longevity and optimal performance of your UHPPOTE Access Control Keypad, follow these maintenance guidelines:

• Tindif: Use a soft, dry cloth to clean the keypad surface. Avoid abrasive cleaners, solvents, or excessive moisture, as the unit is not waterproof.
• Kundizzjonijiet Ambjentali: Ensure the keypad is installed in an environment within the specified working temperature and humidity ranges. Avoid direct exposure to water or extreme temperatures.
• Spezzjoni tal-Wiring: Periodically check all wiring connections for any signs of wear, damage, or loose connections. Secure any loose wires to prevent intermittent operation or electrical hazards.

7 Issolvi l-problemi

If you encounter issues with your access control keypad, refer to the following common problems and their solutions:

8. Informazzjoni dwar Garanzija

UHPPOTE products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official UHPPOTE websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal kwalunkwe talba ta' garanzija.

9. Appoġġ għall-Klijent

Should you require further assistance, technical support, or have questions not covered in this manual, please contact UHPPOTE customer service through the following channels:

• Appoġġ onlajn: Visit the UHPPOTE official websit għal FAQs, gwidi għas-soluzzjoni tal-problemi, u formoli ta' kuntatt.
• Appoġġ bl-Email: Irreferi għall-imballaġġ tal-prodott tiegħek jew għall-informazzjoni uffiċjali websit għall-indirizz elettroniku ddedikat għall-appoġġ.

When contacting support, please have your product model (HBK-A01) and purchase details ready to facilitate a quicker resolution.