Oster 465-42 3-Speed Blender User Manual

1. Introduzzjoni

Thank you for choosing the Oster 465-42 3-Speed Blender. This manual provides essential information for the safe and efficient use of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.

2. Istruzzjonijiet Importanti dwar is-Sigurtà

Meta tuża apparat elettriku, għandhom dejjem jiġu segwiti prekawzjonijiet bażiċi ta’ sigurtà biex jitnaqqas ir-riskju ta’ nar, xokk elettriku, u/jew korriment lill-persuni, inkluż dan li ġej:

• Aqra l-istruzzjonijiet kollha qabel tuża l-prodott.
• Biex tipproteġi kontra xokk elettriku, tpoġġix il-korda, il-plagg, jew l-apparat fl-ilma jew f'likwidu ieħor.
• Superviżjoni mill-qrib hija meħtieġa meta xi apparat jintuża minn jew ħdejn it-tfal.
• Neħħi l-plagg mill-iżbokk meta ma tkunx qed tuża, qabel ma tpoġġi jew tneħħi l-partijiet, u qabel it-tindif.
• Evita kuntatt ma 'partijiet li jiċċaqilqu.
• Tħaddim l-ebda apparat b'korda jew plagg bil-ħsara jew wara li l-apparat ma jaħdimx jew ikun waqa' jew ġie bil-ħsara b'xi mod.
• L-użu ta 'aċċessorji mhux rakkomandati jew mibjugħa mill-manifattur jista' jikkawża nar, xokk elettriku, jew korriment.
• Tużax barra.
• Tħallix il-korda tistrieħ fuq it-tarf tal-mejda jew tal-bank jew tmiss uċuħ jaħarqu.
• Żomm idejk u l-utensili 'l barra mill-kontenitur waqt it-taħlit biex tevita l-possibbiltà ta' korriment serju lil persuni jew ħsara lill-blender. Barraxa tista' tintuża iżda għandha tintuża biss meta l-blender ma jkunx qed jaħdem.
• Xfafar huma jaqtgħu. Immaniġġja bir-reqqa.
• Dejjem ħaddem il-blender bl-għatu f'postu.
• When blending hot liquids, use caution as steam can cause burns.
• Tużax l-apparat għal użu ieħor minbarra dak maħsub.

3. Komponenti tal-Prodott u Aktarview

Familiarize yourself with the parts of your Oster 465-42 Blender:

• Bażi tal-blender: Houses the 400-watt motor and control knob. Features an all-metal drive system for durability.
• Vażett tal-ħġieġ: 1.25-liter capacity, made of heat-resistant glass.
• Għatu: Vinyl material, fits securely on the glass jar.
• Measuring Cap: Transparent plastic cap with 60 ml capacity, integrated into the lid for adding ingredients during blending.
• Ice Crusher Blade: Revolutionary blade designed for efficient ice crushing and blending.
• Small Mixing Cup: An additional cup for preparing smaller mixtures.
• Pum tal-Kontroll: Allows selection of 3 speeds and an OFF setting.

Figura 3.1: The Oster 465-42 Blender featuring its main glass jar, base with control knob, and an accompanying small measuring cup.

Figura 3.2: Ġenb view of the Oster 465-42 Blender, highlighting the robust base and glass jar assembly.

Figura 3.3: Illustrative diagram showing the approximate dimensions of the Oster 465-42 Blender, indicating a height of 17 inches (43 cm).

4. Setup u Assemblea

Before first use, wash all parts except the blender base in warm, soapy water. Rinse thoroughly and dry. The blender base can be wiped clean with a damp drapp.

1. Arma x-xafra: Place the Ice Crusher Blade assembly onto the bottom of the glass jar. Ensure it is seated correctly.
2. Sikura l-Bażi: Screw the jar base (which holds the blade) onto the bottom of the glass jar until it is tight.
3. Poġġi l-Vażett fuq il-Bażi tal-Mutur: Carefully place the assembled glass jar onto the motor base. Ensure it is securely seated and aligned with the all-metal drive system.
4. Waħħal l-għatu: Place the vinyl lid onto the glass jar. Insert the transparent measuring cap into the lid opening.
5. Qabbad l-Enerġija: Ipplaggja l-blender f'sokit elettriku standard ta' 120 volt.

Your blender is now ready for use.

5. Istruzzjonijiet Operattivi

Segwi dawn il-passi għal taħlit sikur u effettiv:

1. Ipprepara l-ingredjenti: Aqta’ l-ingredjenti solidi f’biċċiet żgħar (madwar kubi ta’ pulzier) għal taħlit ottimali.
2. Żid l-ingredjenti: Place ingredients into the glass jar. For best results, add liquids first, then soft foods, then hard foods, and finally ice. Do not overfill the jar beyond the 1.25-liter mark.
3. Għatu Sikur: Always ensure the lid and measuring cap are securely in place before operating the blender.
4. Agħżel Veloċità: Turn the control knob to your desired speed setting (1, 2, or 3).
   • Veloċità 1: For light mixing, stirring, and pureeing.
   • Veloċità 2: For medium blending, chopping, and mixing.
   • Veloċità 3: For heavy blending, crushing ice, and liquefying.
5. Taħlita: Allow the blender to run until desired consistency is achieved. For continuous operation, do not run for more than 3 minutes at a time. Allow the motor to rest for 10 minutes between cycles.
6. Żid l-Ingredjenti Waqt it-Taħlit: If necessary, remove the measuring cap from the lid and add ingredients through the opening while the blender is running. Replace the cap immediately.
7. Waqqaf it-Taħlit: Dawwar il-pum tal-kontroll għall-pożizzjoni "MITFI".
8. Spluggja: Always unplug the blender from the electrical outlet after use.

Nota: The small mixing cup can be used for preparing smaller quantities of ingredients, following similar blending principles.

6. Manutenzjoni u Tindif

Tindif regolari jiżgura prestazzjoni ottimali u jestendi l-ħajja tal-blender tiegħek.

6.1 Quick Cleaning

1. After use, rinse the glass jar, blade assembly, lid, and measuring cap.
2. Fill the glass jar halfway with warm water and add a drop of dish soap.
3. Place the lid securely on the jar and place the jar on the motor base.
4. Run the blender on Speed 1 for 15-30 seconds.
5. Empty the jar and rinse thoroughly.

6.2 Tindif fil-fond

1. Skonnettja l-blender.
2. Disassemble the glass jar, blade assembly, lid, and measuring cap.
3. Wash all removable parts in warm, soapy water. Use a brush to clean around the blades carefully.
4. Laħlaħ il-partijiet kollha sewwa u ħallihom jinxfu kompletament bl-arja qabel ma terġa' tiġborhom jew taħżinhom.
5. Imsaħ il-bażi tal-mutur b'adamp drapp. Qatt m'għandek tgħaddas il-bażi tal-mutur fl-ilma jew fi kwalunkwe likwidu ieħor.

Attenzjoni: Blades are sharp. Handle with extreme care during cleaning.

7 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil-blender tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.

8. Speċifikazzjonijiet tal-Prodott

9. Garanzija u Appoġġ

Oster products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Oster websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

For technical support, service, or replacement parts, please contact Oster customer service. Contact information can typically be found on the product packaging or the official Oster websit.

Riżorsi onlajn: www.oster.com