Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier User Manual

1. Introduzzjoni

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P4558-20 is a two-light linear island chandelier featuring light umber etched glass shades and an antique bronze finish, designed for indoor use.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-kaxxa tal-fjużijiet jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.

• Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC).
• Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċess ta 'installazzjoni.
• Use only UL/cUL listed wire connectors.
• Taqbiżx il-wat massimutage specified for the fixture (100 watts per bulb).
• Immaniġġja l-komponenti tal-ħġieġ b'attenzjoni biex tevita li jinkisru.
• Kun żgur li l-apparat tad-dawl ikun immuntat sew ma' element strutturali tas-saqaf.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni. Jekk xi partijiet huma nieqsa jew bil-ħsara, tippruvax tiġbor jew tinstalla l-prodott.

• Chandelier fixture assembly
• Mounting hardware (crossbar, screws, wire nuts)
• Glass shades (2)
• Folja ta' installazzjoni

4. Setup u Installazzjoni

Follow these steps carefully to install your chandelier. It is recommended to have a second person assist during installation due to the size and weight of the fixture.

Pass 1: Ipprepara għall-Installazzjoni

1. Itfi l-enerġija mis-circuit breaker prinċipali jew mill-kaxxa tal-fjusijiet.
2. Iftaħ il-komponenti kollha mill-pakkett u poġġihom fuq wiċċ nadif u ċatt.
3. Review the included installation sheet for any specific model details.

Pass 2: Immonta l-Apparat

1. Attach the mounting crossbar to the outlet box using the provided screws. Ensure it is securely fastened.
2. Determine the desired hanging height and adjust the suspension rods accordingly. The fixture uses rigid rods for suspension.
3. Carefully lift the fixture towards the ceiling, feeding the electrical wires through the center hole of the mounting crossbar.

Pass 3: Konnessjonijiet elettriċi

1. Connect the bare copper ground wire from the fixture to the ground wire from the outlet box using a wire nut.
2. Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
3. Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
4. Ensure all wire connections are secure and tucked neatly into the outlet box.

Step 4: Secure the Fixture and Install Shades

1. Attach the fixture canopy to the mounting crossbar, securing it with the decorative nuts or screws provided.
2. Carefully place the light umber etched glass shades onto the fixture's lamp holders, securing them according to the specific design (typically with threaded rings).

Step 5: Install Light Bulbs

1. Insert two (2) medium-base light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.

Figura 4.1: Fully assembled Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. This image shows the antique bronze frame, the two light umber etched glass shades, and the suspension rods extending upwards, ready for ceiling mounting.

Pass 6: Irrestawra l-Enerġija

1. Restore power at the main circuit breaker or fuse box.
2. Test the fixture to ensure proper operation.

5. Istruzzjonijiet Operattivi

The Progress Lighting P4558-20 chandelier operates via a standard wall switch (not included) connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Nota: This fixture is designed for use with a standard AC power source (120 Volts) and does not include an integrated control method like an app or push button as a primary control for the fixture itself, but rather refers to potential external control systems it might be compatible with.

6. Manutenzjoni

Tindif

• Dejjem skonnettja l-enerġija qabel it-tindif.
• Biex tnaddaf l-apparat, imsaħ b'ċarruta ratba u niexfa.
• Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass.
• For glass shades, a mild glass cleaner can be used on a cloth, then wipe dry.

Sostituzzjoni tal-Bozza

• Ensure power is off and bulbs have cooled before attempting to replace them.
• Unscrew the old bulb from the socket.
• Screw in a new medium-base bulb, ensuring it does not exceed 100 watts.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Mudell: P4558-20
• Ditta: Progress Progress
• Materjal: Ħġieġ, metall
• Temm: Bronż Antik
• Materjal tad-dell: Etched Glass (Light Umber)
• Numru ta' Sorsi tad-Dawl: 2
• Wattage: 100 watts (max per bulb)
• Voltage: 120 Volts
• Piż tal-oġġett: 11.66 Liri
• Assemblaġġ Meħtieġa: Iva
• Tip ta 'Immuntar: Muntatura tal-Limitu
• Dimensjonijiet (Approssimattivi): Length: 36.00 in., Width: 13.12 in., Height: 23.62 in.

9. Garanzija u Appoġġ

This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Progress Lighting directly.

Manifattur: HI- Progress Lighting

For further assistance, visit the official Progress Lighting websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.